The blue Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (20') is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable's color-coding affords the ability to quickly differentiate between multiple connections onstage, it provides a pleasant aesthetic quality at the same time.

Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

Ideal for Live Sound and Performance    Neutrik XX Silver Connectors    95% Dual-Spiral Shield    Twin Conductive PVC Inner Shields    24-Gauge OFC Conductors    Cotton-Yarn Wrap Reduces Noise    Shrink-Wrapped Solder Points    Color-Coded for Visibility and Style

95% dual-spiral shielding offers protection from EMI and RFI noise

Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable's core

24-AWG oxygen-free stranded copper inner core provides the best possible conductivity

Cotton yarn reduces electrostatic and microphonic noise

All solder points shrink-wrapped for protection

Neutrik XX silver connectors offer high conductivity

Caged type contact and improved ground contact

Related Questions and Answers

Q: 1. Will this fit into a Switchcraft E/EH rack panel?

A: Yes, the Neutrik NA3MDF will fit in a Switchcraft E/EH rack panel.

Q: 2. I have a Tascam DR40 and a AudioTechnica 3350 Lavallier mic. Is this going to work ?

A: This is the type of converter that is used for connecting mics with a 1/8 /3.5mm TRS plug into a device with a XLR plug. In other words, yes, it will work.

Q: 3. Will this work to plug Deity connect W-lav pro and W-lav micro lavalier mics into XLR plugs on a Tascam DR-40 linear pcm recorder and a Motu M2 and will I need to use these two devices with or without Phantom power?

A: No, the Kopul A-XMMF is not compatible. It is intended for use with microphones that have a 3.5mm connector and does not convert phantom power to plug-in power. The Deity W.Lav Pro and W.Lav Micro use a MicroDot connector. You can use the DPA Microphones DAD6001 MicroDot to 3-pin XLR Adapter (B&H# DPDAD6001BC) which has the correct connectors you need and will convert phantom power to plug-in power for the Deity W.Lav Pro and Micro lavalier mics.

Q: 4. Will this work to get a Sennheiser lav ew 122 or ME 2-II wired?

A: No, the adapter you need is the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). This adapter will convert the 3.5mm plug to XLR and also allow converts phantom power (typically 48V) from a mixer or recorder to plug-in power (approximately 3 to 5V) which the lav mic needs to operate. The Kopul adapter only converts the plug to XLR but will not convert phantom power to plug-in power.

Q: 5. Will this click in to a Zoom F3? My shotgun mic won't click in and I have seen others click.

A: Yes, the Neutrik 3-Pole XLR Female to 3-Pole XLR Male Extension Adapter will be compatible with the Zoom F3's locking Neutrik XLR connectors.

Q: 6. Neutrik NA3FDM XLR Female to I recently purchased the Male Feedthrough Adapter for Panel Mount. What type of screws are needed?

A: The Neutrik NA3FDM XLR Female to Male Feedthrough Adapter for Panel Mount requires 4-40 screws. The length will depend on your use case, but 3/8 is commonly recommended.

Q: 7. Will NA3FDM fit Audio-Technica AT8646QM Microphone Shock-mount Plate?

A: The Neutrik NA3FDM should fit into the Audio-Technica AT8646QM shock mount plate, but the original connector on the plate is much different from the NA3FDM. Just be aware of the extra clearance needed behind the plate to accommodate the barrel of the male connector on the back.

Q: 8. I will be installing this in a kick drum. What size hole would I need to cut out and how long is the adapter?

A: Sorry, can't find a ruler but it's about 2-3 inches long. Maybe 1 1/2 wide for the round part. Really it's about the size of a standard XLR connector with the square plate at the end.

Q: 9. Is the mini socket stereo? That is; will it take a stereo signal from, say, a laptop, and covert it to mono?

A: Yes, and it works great for playing stereo from my laptop speaker output into a mono microphone input on my mixer so I can EQ it, after I also add a 20 or 40 dB pad between this adapter and my mixer. I have this adapter and according to the schematic diagram on the rear of the package, at the 3.5mm mini female jack, the Tip and Ring are connected together and go to pin 2 of the XLR male. The 3.5mm jack Sleeve connects to pin 1 and 3 of the XLR male.

Q: 10. Does this device improve the input sound coming from a mixer into the H4n via XLR cables?

A: This is a simple cable that will preserve the signal being captured. it does not improve or enhance the signal in any way.