Well suited for a variety of small to medium sized spaces and venues including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more, the Avante Audio A10X Achromic X Series is a 10", two-way active loudspeaker with a 1000W peak dynamic amplifier, integrated DSP, and Bluetooth 5.0 technology for wireless input and control. The Class-D amplifier delivers 250W (RMS) to the 10" woofer, while the Class-AB amplifier drives 50W (RMS) to the 1" high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.

The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a three-band EQ and high-pass filter to further enhance the sound. Settings can be adjusted via the LCD screen or remotely via Bluetooth using the dedicated app for iOS mobile devices. The H-PP molded enclosure features a tough 1.2mm steel grille and a dual-position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, a 3.5mm Aux input, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10X Achromic Series loudspeaker includes a power cord.

Stage, Theater, Small & Midsize Events    10" Woofer, 1" HF Compression Driver    250W RMS Class-D Low-Frequency Amp    50W RMS Class-AB High-Frequency Amp    Bluetooth 5.0, LCD Screen    XLR/TRS, RCA and 3.5mm Inputs    2-Channel Mixer, Advanced DSP, Presets    121 dB Peak SPL    70 Hz to 20 kHz Frequency Response    Remote Control via iOS App

• Thanks to the addition of Bluetooth 5.0 technology, audio can be streamed directly to any of the Achromic X Series speakers wirelessly from a compatible cell phone, tablet, or laptop.
• A dedicated iOS app (compatible with both iPhone and iPad) is also available, which allows comprehensive control over the integrated 2-channel mixer and comprehensive DSP. The app allows level, three-band EQ, and high-pass filter control for each channel independently as well as selection of DSP presets (Normal, Live, Club, and Speech) and configuration of the internal delay feature.
• The app allows audio engineers to make adjustments remotely while listening to the speaker’s output, making for a quicker and more convenient workflow. In addition, the app allows you to create scenes—which are snapshots of all the current level and DSP settings—to be saved and recalled in the future.
• You can equalize the speaker system to optimize the sound in the room, then name and save as a scene for that particular venue. Next time you return to this venue, you can simply recall the scene and you are ready.

• Amp Power: 1000W (peak) dynamic
  • LF: Class-D 250W (RMS)
  • HF: Class-AB 50W (RMS)
• Built-in digital signal processing (DSP) with LCD screen, EQ, and presets
  • Preset 1: Normal
  • Preset 2: Live
  • Preset 3: Club
  • Preset 4: Speech
• Frequency Range: 70 Hz to 20 kHz
• Dispersion (H x V): 90 x 60°
• Output (Peak SPL at 1m): 121 dB
• Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
• Inputs: Balanced combo XLR-1/4", 3.5mm, and two RCA
• Output: Balanced XLR
• Enclosure: H-PP molded
• Grille: 1.2mm steel
• Handle: 1 on top
• Fly Points: 2 on top, 1 on back
• Pole Mounting: Dual position 0 or 7.5°

Related Questions and Answers

Q: 1. Can I use a micophone to the Aux (via 3.5 mm jack or usb to 3.5 mm jack adapter) to transmit to a bluetooth speaker?

A: The Logitech Bluetooth Audio Adapter BH #LOBTAA will not allow you to plug a microphone to the AUX. This is only to connect to powered speakers.

Q: 2. Is there a way to "reset" the unit so that previously paired devices don't connect automatically?

A: No, there is no way to reset the Aluratek AISM01F Bluetooth Audio Receiver BH #ALAISM01F. You would need to make sure that either those devices are not powered on when you turn on the receiver or depending on the device, you could go into it's bluetooth settings and disconnect/unpair it from that device or just turn off bluetooth.

Q: 3. why these speaker only have audio inputs and no outputs? should get a split connector to reach both speakers? Avante Audio Achromic AS8 1000W Column PA System

A: In addition to its audio inputs, the Avante Audio Achromic AS8 1000W Column PA System also features an XLR 3-Pin Male Balanced/Unbalanced Line Output connection for sending signal to externally connected speakers.

Q: 4. What is the life of battery? Since the battery is not removable or replaceable - what happens when it no longer keeps a charge?

A: If there is a problem with the built-in rechargeable battery on the Beachtek DXA-MAX 2-Channel Active Audio Adapter, you should contact the manufacturer for assistance. Although the battery is not user replaceable, the manufacturer will be able to replace it. The manufacturer has not provided any details for the life expectancy of the battery and it will vary based on use and the environmental conditions where it is used, but it should last for many years.

Q: 5. am I able to use 3 labs with beachtech?

A: You can use up to 2 lavalier mics with the Beachtek DXA-MAX.

Q: 6. Can this be used with Nikon Z8 camera?

A: Yes, the Beachtek DXA-MAX 2-Channel Active Audio Adapter for DSLR can be used with any camera that has a 3.5mm microphone input jack.

Q: 7. Any way to turn this off? I have this unit and love it but I have to forget this device each time I want to use my phone or else the audio in the phone is silenced.

A: it would be easy if you just turn off bluetooth on your iphone. turn it back on when you needed it.

Q: 8. why these speaker only have audio inputs and no outputs? should i get a split connector to reach both speakers?

A: In addition to its input connections, the Avante Audio Achromic AS8 1000W Column PA System also features an XLR 3-Pin Male Balanced/Unbalanced Line Output connection for sending signal to externally connected speakers.

Q: 9. Could I plug in a headphone splitter to stream to two headphones?

A: This will not work with a headphone splitter.

Q: 10. will it function while charging?

A: Yes, the Aluratek AISM01F Bluetooth Audio Receiver will function while charging.