This Dual Motor Electric Standing Desk with 55" Tabletop from Mount-It! uses a black steel and aluminum frame to support a 55" adrift top. The 29.3 to 48.2" height range can be adjusted using the touch control panel. Save up to three different heights so you can have consistent settings to return to when you need the desk to adapt to your ergonomic needs. The dual-motor design is powerful and raises the tabletop at a consistent 1 inch/s while staying under 50 db in sound. This desk can support up to 220 lb so you can raise and lower your whole setup.

Height Adjustable from 29.3 to 48.2"    55 x 29" Surface    Electric Dual-Motor Design    Save up to 3 Heights    Steel and Aluminum Frame

Related Questions and Answers

Q: 1. Would it fit 200-500 Nikon?

A: Yes this backpack can accommodate a Nikon AF-S 200-500mm lens.

Q: 2. Will this unit add audio delay if desired?

A: According to the AJA FS2 Manual, on pg. 78, you will be able to control audio delay. https://www.aja.com/assets/support/files/4202/en/AJA_FS2_Manual_v3.0.pdf

Q: 3. Will this tripod work with the logitech 920S webcam?

A: Yes, the webcam has a 1/4-20" thread, which is standard for tripods.

Q: 4. would it fit a Godox AD600 pro as well as a body and a couple lenses?

A: No, I would recommend moving up to the Thunderhead 75.

Q: 5. Would this mic work well for Podcasting, Virtual Meetings, Speech Videos? If not, would you recommend the Shure Sm57 or Sm7b?

A: Yes and Maybe. As a podium mic, which requires 48V phantom power, this mic MAY be a good choice, providing that it is connected to a device providing 48V phantom power, an audio interface or an audio mixer (with USB out) would be required to connect this mic to a computer. Examples include: https://www.bhphotovideo.com/c/product/1479273-REG/focusrite_scarlett_solo_3g_scarlett_solo_usb_audio.html https://www.bhphotovideo.com/c/product/1251143-REG/shure_mvi_a_ltg_mvi_digital_audio.html/specs The Shure SM57 or SM7B are good choices, though are less sensitive mics, so require very close proximity (3-8") to the subject. These do not require phantom power, but would still require an audio interface to a computer. These 2 mics MAY also benefit greatly by using a Cloudlifter: https://www.bhphotovideo.com/c/product/1177578-REG/cloud_microphones_cl_1_cloudlifter_mic_activator.html

Q: 6. I wanted to know if this tripod would support a Nikon d5500 with a 35mm 1.8g lens

A: The combined weight of the Nikon D5500 DSLR camera and the heavier Nikon 35mm f/1.8G lens (they have two different versions) is approximately 1.6 lbs. As the Sunpak 1818XL Tabletop Tripod has a maximum load capacity is 2.2 lbs, yes, this setup would work with this tripod.

Q: 7. Can this be set up with only attaching one arm ? or does it come attached ?

A: The arms can be detached, so you can use only one if desired.

Q: 8. Will this fit a Nikon D3200 and a Sigma 100-400 lens?

A: Yes, it can manage that.

Q: 9. Am I able to rotate this without any additional hardware when attaching to a fixture with a Bowens mount?

A: Yes.

Q: 10. I'm interested on this tripod but does it support the Canon Vixia HF R80 Camcorder?

A: Yes, this tripod will support the Vixia R80.