Cool your CPU and chassis using the black Lian Li 360mm Galahad II Trinity Performance AIO Liquid Cooler. The performance model of Lian Li's Galahad lineup reaches higher speeds and airflow to ensure your CPU stays cool while under load. A double stack fin radiator and three included 120mm Lian Li UNIFAN P28 fans work together to pass more air through your system, making this perfect for new or experienced builders who want reliable performance from their liquid CPU cooler.

360mm Radiator Size    Supports AM4 & AM5 AMD Sockets    Supports LGA 1700 & 1200 Intel Sockets    3 x 120mm Lian Li UNIFAN P28 Fans    200 to 3000 rpm Fan Speed    Up to 109.6 CFM    22.03 dBA Noise Level    Double Stack Fin Radiator    3 x Pump Covers

Three included pump heads offer differing aesthetics for your setup, including Duo-Infinity, Dazzle, and Sink-Hole designs. For increased ease of use, the pump head can be rotated in 90° increments so you can better avoid other motherboard components getting in the way. An included leather strap also helps you keep the tubes organized.

The Performance line of Lian Li Galahad AIO CPU coolers offers a newly designed pathway and larger impeller for better waterflow for liquid coolant when compared to previous versions. The LCP fans and increased pump speeds work to raise the ceiling for airflow to keep your system temperatures down.

The pump motor reaches speeds up to 4200 rpm. Heat is dissipated using the copper plate and radiator, and the radiator's double wave fin design creates more surface area to improve cooling.

Three daisy-chain capable UNIFAN P28 Fans are included with this CPU cooler. These fans offer speeds up to 3000 rpm and an airflow up to 109.6 CFM. Noise levels sit at 22.03 dBA for a quieter operation.

Lian Li's L-Connect 3 software allows you to take control of multiple settings regarding your CPU cooler. Change the pump head color, fan speeds, and more.

Related Questions and Answers

Q: 1. Does this support NDI'HX?

A: The Magewell Pro Convert for NDI to SDI is able to decode NDI HX.

Q: 2. Is there any way I can split up my DF96 powder so that I can just mix up 300ml of liquid (I use a lab box so I only need 300ml at a time)? My developing tank is small so it would make more sense, than mixing up 1L at a time when I am only going to develop a few rolls.

A: I contacted the manufacturer concerning your inquiry about the CineStill Film DF96 Monobath for Black & White Film (Powder, to Make 1L). According to CineStill, they state they do not recommend dividing up the powder concentrates. Because there is a mixture of several powdered chemical components in these concentrates, each with their own grain size and weight, it's practically impossible to ensure that the chemical concentrations of all components will be accurate if divided by weight or volume, which could lead to uneven development. CineStill always instruct users to mix up the full 1000mL and re-use for up to 16 rolls within two months. Concerning your use of a Lab-Box, CineStill states you should mix up the full 1000mL volume using all of the powder concentrate, pour 300mL from the chemical storage bottle into their Lab-Box, and then pour back into the chemical storage bottle, making a tally mark to indicate the number of rolls processed in the chemistry until they reach 16 or until the mixed chemistry is 2 months old.

Q: 3. Will the DF96 monobath work well with the Lab-Box?

A: Yes, the Cinestill DF96 Monobath for Black & White Film the will work with the Lab-Box.

Q: 4. This mix uses water, correct ?

A: Yes it does

Q: 5. Is the monobath for developing prints?

A: No, this chemistry is for use with film.

Q: 6. If i want to develop 2 rolls of film at the same time, it will be the same time developing as 1 roll?

A: Yes, development time is the same for 1 or 2 rolls.

Q: 7. Is there any differences in developing time between 120 film and 35mm film ?

A: Assuming they are the same film, speed, etc... there should be no difference in dev times.

Q: 8. Will it cross convert for example, NDI 1080i@59.95 to SDI 1080p@29.97?

A: Yes, the Magewell Pro Convert for NDI to SDI Decoder supports manually setting output resolution and frame rate. You will be able to select 1080p 29.97 as the output resolution.

Q: 9. developing 3 rolls at the same time , using (Paterson Multi-Reel 3 Developing Tank) it counts as 3 rolls? so by the next time developing i add (15+15+15) seconds developing time when reusing the chemical ???

A: Yes, using the Paterson Multi-Reel 3 Developing Tank with 3 reels would count as developing 3 rolls with this chemistry.

Q: 10. Is it truly odor free?Will it stain a typical bathroom sink?

A: While this product is odor-free, it should not be disposed down a sink as it would require disposal through a licensed facility. Please see the link for more information: http://bit.ly/32anR5i