For vloggers and content creators, the black Comica Audio Vimo Q is a wireless system with four transmitters with built-in microphones and one four-channel receiver as well as a charging case to carry them in. It delivers reliable transmission with a 20 ms latency up to 656' via 2.4 GHz wireless band directly to your camera, mixer, or smartphone. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording interviews with four subjects. Each device comes with a back clip to attach to your subject or to your camera's shoe mount. Internal lithium-ion batteries power all components and included USB-C cables can charge them back up once depleted in just two hours. The set of four furry windscreens can be attached to either transmitter to reduce wind interference. The included charging case extends the battery life of each component by 16 hours.

For Vlogging, Content Creation    For 4-Person Shoots with Camera or Phone    4 Clip-On Transmitters/Microphones    4-Channel Clip-On Receiver    Includes Charging Case    HD Screen, De-Noise Technology    3.5mm Inputs on Transmitters for Lavs    656' Wireless Range    USB, 3.5mm TRS, and 3.5mm TRRS Cables    Furry Windscreens for Transmitters

For vloggers and content creators, the black Comica Audio Vimo Q is a wireless system with four transmitters with built-in microphones and one four-channel receiver as well as a charging case to carry them in. It delivers reliable transmission with a 20 ms latency up to 656' via 2.4 GHz wireless band directly to your camera, mixer, or smartphone. Easy-to-use with plug-and-play operation, this system offers a complete solution for recording interviews with four subjects. Each device comes with a back clip to attach to your subject or to your camera's shoe mount. Internal lithium-ion batteries power all components and included USB-C cables can charge them back up once depleted in just two hours. The set of four furry windscreens can be attached to either transmitter to reduce wind interference. The included charging case extends the battery life of each component by 16 hours.

Four clip-on transmitters offer built-in omnidirectional microphones, while their de-noise and mute functions can be controlled via their onboard buttons. The four-channel receiver features both mono and stereo modes as well as a safety track recording. A charging case stores and charges the components while on the go.

Shoot outdoor videos with improved sound thanks to the Vimo Q's 656' transmission distance and less than 20 ms sound delay.

An internal DSP denoise chip reduces unwanted noise automatically. You can toggle additional denoise using the onboard controls to filter out environment noise and produce clearer vocals.

• Monitor audio in real time with the receiver's 3.5mm headphone jack
• Record in mono, stereo, and safety modes to capture the audio you desire
• Safety mode helps users avoid audio peaking
• Monitor your audio and charge the device simultaneously with the included 2-in-1 cable
• Condenser capsules and 48 kHz / 24-bit sampling deliver lossless sound to devices of your choice
• The receiver's 3.5mm connector allows for compatibility with DSLR/mirrorless cameras, smartphones, and audio recorders with compatible ports
• The receiver also outputs audio digitally via the USB-C port for compatibility with a wide range of computers and mobile devices and a 2-in-1 charging/audio output cable is included

The HD display on the receiver monitors audio dynamics, battery life, volume, and audio modes. It rotates to suit your mounting configuration and maintains visibility. Onboard controls include volume controls on both components, a mute button on the transmitters, and de-noise button.

• Included charging case extends battery life to 16 hours
• Built-in rechargeable lithium-ion batteries
• 8-hour transmitter and receiver battery life, 3-hour charging time

Related Questions and Answers

Q: 1. What is the purpose or function of the volume button in the receiver? I don't understand what it's used for.

A: The volume control on the receiver enables you to raise and lower the volume of the recording going into your iOS device with lightning connector.

Q: 2. Should this work with the DJI OM4: in particular, can the OM4 balance with the receiver attached to an iPhone XR? Should it, as external audio, work with the DJI Mimo App?

A: We have not tested the DJI OM4 with the Comica Boom-X wireless mic system on an iPhone XR to be able to say whether or not there will be any issues with balance on the OM4. The external mic will work to deliver audio, but the Mimo app does not provide control of the parameters such as turning the volume level up or down.

Q: 3. Do the mics or receiver have a limiter?

A: No, this system does not come with on-board limiters. You do have the ability to adjust the output volume from the receiver, but limiting functions would be done in your recorder, mixer, or camera,

Q: 4. will this fit while using dji mimo 3?

A: This should fit while using it with the DJI Mobile 3.

Q: 5. How can you record each channel independently through a recorder like the Sound Devices Mix Pre 6?

A: The Comica Audio Vimo Q Mini 4-Person Wireless Microphone System for Cameras & Smartphones (Black, 2.4 GHz) only offers a mixed output and cannot be used for multi-track recording.

Q: 6. Is this better than the BoomX-U?

A: Neither unit is better than the other. This unit works in the 2.4ghz range and slightly simpler to pair, while the BoomX-U is based in the UHF frequency range. The X-D would be great for close range quick setups, will the X-U would be great for longer distance interviews in a challenging wi-fi environment.

Q: 7. Will the receiver fit into the Lightning port when the iPhone has a case? Cheers

A: You can always test to see if contact is being made while your case on, but devices such as this that connect directly to an iPhone generally make better contact when the protective case is removed.

Q: 8. Hi, Can I use lightning to USB C DAC cable to connect it to my iPhone?

A: Yes. You can use the RODE SC15 Lightning USB Type-C to Lightning Accessory Cable (B&H # ROSC15) to connect the USB-C output from the GVM GVM-MIC LM2 2-Person Wireless Microphone System to an iPhone.

Q: 9. How can we use this for zoom meeting plugged into a phone? There is no audio so cannot hear others, but they can hear me.

A: Try starting the app on your iPhone using the built-in mic (without connecting the wireless system). Once the app is already running, then connect the wireless receiver to the iPhone. That may work. You will probably need to use headphones to hear the others in the Zoom meeting. Apple iOS devices may not work with an external mic when using video conferencing apps that have two-way audio, but do work for standard type video and audio recording. Comica has not provided any details about compatibility for this wireless system with Zoom meetings and Apple is constantly making changes to the software. We cannot confirm compatibility as results can vary depending on the version of the phone and operating system. However, we can confirm that the Comica BoomX-D DMI2 does work for recording audio and video with audio on the iPhone.

Q: 10. Can you connect an external mic such as the Rode Video Mic? I saw a review that stated this might be an issue.

A: While it is possible to connect the VideoMic to the Boom transmitter, we can not guarantee proper functionality since certain mic transmitters have specific voltage and impedance requirements from the mics which could create noise issues if not matched.