The orange Kopul Premium Performance 3000 Series XLR Male to XLR Female Microphone Cable (1.5') is designed to be an extremely quiet and flexible cable that is ideal for the most demanding live sound and performance applications. The cable is engineered to be durable and provide protection against EMI, RFI, and static noise. While the cable's color-coding affords the ability to quickly differentiate between multiple connections onstage, it provides a pleasant aesthetic quality at the same time.

Premium Performance 3000 Series cables are made from 24-AWG OFC copper wire that's wrapped with PE insulation and a conductive PVC inner shield. A cotton-yarn inner layer helps reduce electrostatic and microphonic noise. The 95% dual-spiral shielding makes the cable resistant to EMI and RFI noise. The Neutrik XX silver connectors provide a high level of connectivity, and all the solder connections are shrink-wrapped for protection.

Ideal for Live Sound and Performance    Neutrik XX Silver Connectors    95% Dual-Spiral Shield    Twin Conductive PVC Inner Shields    24-Gauge OFC Conductors    Cotton-Yarn Wrap Reduces Noise    Shrink-Wrapped Solder Points    Color-Coded for Visibility and Style

95% dual-spiral shielding offers protection from EMI and RFI noise

Twin conductive PVC inner shielding provides 100% coverage of the core conductor. It helps keep the cable's signal from radiating and affecting nearby cables and helps prevents external EMI from penetrating to the cable's core

24-AWG oxygen-free stranded copper inner core provides the best possible conductivity

Cotton yarn reduces electrostatic and microphonic noise

All solder points shrink-wrapped for protection

Neutrik XX silver connectors offer high conductivity

Caged type contact and improved ground contact

Related Questions and Answers

Q: 1. I own a Audio-Technica ATH-M50xSTS Analog version, I wanna connect it to my PC. Because the mic jac is XLR can I do this?

A: No, the Kopul XRSM 3-Pin XLR Female to 3.5mm RA Stereo Mini-Plug Cable will not enable connection for the mic from the Audio-Technica ATH-M50xSTS StreamSet Headset with XLR and 3.5mm Connectors through the computer's 3.5mm input. The computer's input will not supply enough voltage to power the microphone. The best option for connection of the ATH-M50xSTS would be to use a USB audio interface with an XLR mic input that can supply phantom power.

Q: 2. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 3. Is this balanced or unbalanced?

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is an unbalanced cable.

Q: 4. Fixing the XLR gender being wrong with adapters, will these extenders pass audio in both directions on the Ethernet cable?

A: XLR is not de-facto a directional medium, which is to say that it's really just a set of three pins with copper wire in between. Audio can only flow one way from an XLR connector to another, but it doesn't actually matter which direction that is. So, if for some reason you have audio passing from male jack 1 of the Kopul 4-Channel XLR Network Cable Extender Kit to female jack 1, that will work fine. You just can't have audio flowing both ways at the same time between two connectors.

Q: 5. is it compatible with Tascam dr-10L?

A: This will allow you to plug a dynamic XLR mic into the DR-10L

Q: 6. Can this cable be used with a Sennheiser ew100 transmitter

A: Yes, to connect any microphone other than the included lavalier, this cable will work.

Q: 7. Can this cable be used to run line level audio from a mixer to the camera?

A: Yes, you can use the Mogami Gold Stereo Mini Male to 3-Pin XLR Female Microphone Cable to send line level audio from a mixer to a camera, but you must use an in-line attenuator such as the Hosa Technology ATT-448 In-Line Switchable Input Attenuator with 20, 30 or 40dB of Attenuation (B&H # HOATT448) to pad the line level signal so it does not overload the camera's mic input. The ATT-448 can connect directly to the mixer or you can use an additional XLR cable between the mixer and attenuator if you need more length.

Q: 8. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 9. Will NA3FDM fit Audio-Technica AT8646QM Microphone Shock-mount Plate?

A: The Neutrik NA3FDM should fit into the Audio-Technica AT8646QM shock mount plate, but the original connector on the plate is much different from the NA3FDM. Just be aware of the extra clearance needed behind the plate to accommodate the barrel of the male connector on the back.

Q: 10. How long would be the network cable?

A: No cable is included with the Kopul 4-Channel XLR Network Cable Extender Kit with Male and Female Extenders. As these extenders support transmission of analog audio, AES/EBU, and DMX signals, recommended cable length will vary based on what kind of signal you want to send.