Create smooth vehicle-based video footage using your handheld gimbal, small mirrorless camera, or DSLR with this 3565B SC-15K 4-Arm Suction Cup Camera Mount Kit from SmallRig. The mounting kit consists of three 4" suction cups, three articulating arms with ball head mounts, a half ball head, a quick release camera plate, a magic arm with lens support, and a battery adapter plate.

The rigging kit supports camera rigs weighing up to 22 lb (recommended) and can be attached to flat and contoured surfaces such as cars or boats thanks to its three individually articulating, height-adjustable arms and heavy-duty suction cups. Optional 6" suction cups are available separately to support up to 33 lb loads.

The arms attach to the cups using NATO clamps and are easily adjustable at any angle. On the other end, they attach to a half ball head with an Arca-type quick release camera plate, and an optional magic arm is included to support a heavy or long camera lens. A battery plate adapter is included to support a separately available battery plate to power your rig.

3-Arm Suction Cup Car Mount    3 x Heavy-Duty 4" Suction Cups    3 x Articulating Arms with Ball Heads    22 lb Recommended Load Capacity    Half Ball Head with Quick Release Plate    Battery Adapter Plate    1/4"-20, 3/8"-16 & NATO Rail Mounts    Tether, Magic Arm, Carry Case

Related Questions and Answers

Q: 1. Will this work with the new Osmo Pocket 2 ?

A: Due to the slight difference in size the SHAPE Suction Cup Mount with Ball Head for DJI Osmo Pocket will not fit the DJI Pocket 2.

Q: 2. Do you need a fluid head or can you use it without?

A: No, a fluid head would only be required for the purpose of operation, but not if the camera is mounted on this and left alone.

Q: 3. Is it compatible with the Manfrotto Monopod XPRO Over 4 section aluminum?

A: The size of the leg and the foot are not listed unfortunately. Looking at the part list for the monopod, the foot is not listed. I would suggest trying it to see if it fits and if not, returning it.

Q: 4. Can you mount a DJI Ronin S gimbal to it?

A: Yes, you can mount a DJI Ronin S gimbal to this. Years working on pro camera crews with superb grips taught me that when I hung a $500,000 Panaflex off a car to be driven by an unpredictable actor on Sunset Boulevard, at night, in the rain, you also want safety ropes or straps just in case the actual mount fails.

Q: 5. Does this dual suction cup glass mount come with the screw that threads into the bottom of the Marshall CV503-WP camera?

A: Yes, the Marshall Electronics Dual Suction Cup Glass Mount with Adjustable Tilt Arm & 1/4"-20 Ball Mount's 1/4"-20 ball mount would screw directly into the base of the Marshall Electronics CV503-WP.

Q: 6. I have a Manfrotto 680B monopod. Will the 250SC1 Manfrotto Suction Cup/Rertractable Spiked Foot fit on my monopod?

A: You can use the 204SCK3 https://bhpho.to/2XTc645.

Q: 7. How much weight can this single suction mount hold? I saw 39lbs in reference to the head, but I want to confirm what the suction cup can handle.Thank you!

A: Yes, Matthews' website and the Overview on our website both indicate the Matthews BH-30 Ball Head with 10 (25cm) Suction Cup Mount will support up to 39.6 lb (18 kg). The ball head suction cup mount itself weighs 6 lbs (2.72 kg).

Q: 8. Does it work with Osmo Pocket 3?

A: The SHAPE Suction Cup Mount with Ball Head for DJI Osmo Pocket will not work for the OSMO Pocket 3, due to the larger dimensions and longer screen display.

Q: 9. Any experience using this particular mount in the winter, should I even dare use a car mount in the cold?

A: The cup is ratted from 10 degrees to 120 moisture can reduce the slip resistance of the cup. The red-line indicator may not perform reliably at elevations over 5,000'.

Q: 10. Can the NATO clamps on the end of the Magic Arms be unscrewed and replaced with other 1/4" accessories or mounts?

A: No, the NATO clamps on the arms of the SmallRig 3565B SC-15K 4-Arm Suction Cup Camera Mount Kit cannot be detached and replaced with 1/4" screw mounts, but you could use the Falcam F22/F38 Quick Release Plate, B&H # FAF22F38QRP, which can clamp into the NATO clamps and provide you with a 1/4" screw to mount an accessory on the arm instead.