The Pearstone PM Series 1/4" TRS Male to XLR Male Professional Interconnect Cable (1.5') is ideal for audio applications in which a device with an XLR input needs to be connected to a device with a balanced 1/4" output. Typical scenarios include connecting the output of a mixing board or audio interface to a powered speaker, or using an aux send to route signal to an outboard effects processor.

The cable is equipped with 24-gauge oxygen-free copper conductors and spiral shielding to protect against EMI and RFI noise. The professional-grade cast-zinc Rean XLR connector is field serviceable and features silver-plated contacts, while the Rean 1/4" TRS connector features a molded design for maximum strain relief. The twin conductive PVC shield reduces electrostatic noise, and distinguishes the PM series as the best value in its class.

1/4" TRS Male to XLR Male Cable    24-Gauge OFC    Twin Conductive PVC Shield    Spiral Shielding    Rean XLR Connector    Rean 1/4" TRS Connector    Cast Zinc Black Shells    Silver-Plated Contacts

Professional quality, field-serviceable, cast-zinc Rean connectors with silver-plated contacts

Twin conductive PVC shield reduces electrostatic noise

24-gauge oxygen-free copper conductors

Spiral shielding to protect against EMI and RFI noise

Related Questions and Answers

Q: 1. is this a true TRS? meaning the tip is wired to pin 2, ring is wired to ping 3 and sleeve is pin 1 ? Or is this a pre-summed TRS?

A: This cable is wired straight through. Standard TRS. Pin 2 to Tip, Pin 3 to Ring, Pin 1 - Ground/Shield.

Q: 2. If the split is 18" from the end, which side is closer to the split? The XLR or the 3.5mm?

A: The XLR connectors on the Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable (6') are closer to the split end of the cable.

Q: 3. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 4. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 5. Roland's list for this RCC-3-TRXM cable subtitles it a "balanced interconnect cable," but the product package diagram shows one lead and one shield; no 3rd lead for balancing signal. So which is this: bal/unbal?

A: The RCC-3-TRXM is a balanced audio cable. The XLR and 1/4" TRS connectors provide a balanced signal.

Q: 6. will this work with the lavalier Sennheiser ew 112-p G3 receiver?

A: The Sennheiser EW receiver unit requires a locking connector for proper operation. This cable is not compatible. Kopul does offer a cable the ROC-LM2. Sennheiser also offers an XLR cable identical to the one that ships with the system, the CL-100

Q: 7. Balanced or unbalanced?

A: The Pearstone PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable is a balanced cable.

Q: 8. Is this a balanced cable for use with the EW 500 Series?

A: Yes, the Cable Techniques Mini TRS to XLR Male Low-Profile Wireless Output Cable (18") would be a great choice for use as an output cable with the Sennheiser EK 500 Pro Wireless Camera-Mount Receiver.

Q: 9. Will this connect properly with good audio quality from the RodeLink Receiver/Rode Wireless Go's Receiver to a camera's XLR input?

A: Yes

Q: 10. Can I use this cable to send an audio feed(3.5mm/sub out) from a Zoom F4 Recorder into a cameral's XLR input, such as Sony FS7?

A: The Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable could be used to connect a line output to a camera's XLR inputs, but you should be sure to set the input level to line level to avoid overloading the camera's preamps.