Connect your mixer/recorder to external power sources via the SPD-HRT4 cable from Deity, which features a 4-pin push-power jack (compatible with Hirose 4-pin) on one end and a TA4F connector on the other. The SPD-HRTA is designed to connect Hirose-compatible power distros to TA4 devices and can handle the higher amps needed to supply power-heavy devices.

Connect Power Distros to TA4 Devices    Use with Sound Devices 833    Use with Sound Devices 888    Use with Sound Devices Scorpio    Handles Higher Amps

• Sound Devices 833
• Sound Devices 888
• Sound Devices Scorpio

Related Questions and Answers

Q: 1. What's the difference between this and the Sony VMC-BNCM1 cable?

A: The Deity Microphones C23 Timecode Cable uses a 3.5mm male timecode connector, while the Sony VMC-BNCM1 Timecode Adapter Cable has a BNC female timecode connector.

Q: 2. Does this work on a Sony a7siii

A: No, the Deity Microphones C23 Timecode Cable for Sony FX3 / FX30 Cameras is not compatible for use with the Sony a7S III Mirrorless Camera. The camera does not have internal timeccode capability.

Q: 3. how long is it?

A: The length of the Deity Microphones C12 Locking Right-Angle 3.5mm TRS to Right-Angle 3.5mm TRS Coiled Cable for Mirorless/DSLR Cameras has not been specified by the manufacturer.

Q: 4. Will this work for connecting a Rode Lav mic to a Sony a6300?

A: This connector will allow the Rode Lavalier Microphone, BH #ROLAV to connectt with the Sony a6300 camera.

Q: 5. Is this compatible with Sony URX-P2 ? Thank you !

A: The Deity Microphones C12 Locking Right-Angle 3.5mm TRS to Right-Angle 3.5mm TRS Cable for Mirrorless/DSLR Cameras should be compatible with the Sony URX-P2.

Q: 6. does this work with tentacle sync devices?

A: No, the Deity Microphones C19 Timecode Cable for Canon R5 C Camera does not work with the Tentacle Sync E mkII Timecode Generator. The Deity 3.5mm locking connector is slightly different than the one used by Tentacle Sync and does not stay securely connected to the Tentacle Sync input/output. As a better option, use the Tentacle Sync Tentacle to DIN 1.0/2.3 Cable (B&H # TETD123C), which is fully compatible with Tentacle Sync timecode devices.

Q: 7. Can you recommend a mic stand adapter for this? Say's the diameter is .75"

A: You can use a shockmount like the Auray SHM-ESG Suspension Shockmount for Shotgun Microphones (B&H # AUSHMESG),the RODE SM4-R Suspension Shockmount (B&H # ROSM4R), the Airo by K-Tek ASM1 Shockmount 1 (B&H # AIASM1), or the Audio-Technica AT8415 Universal Shockmount (B&H # AUAT8415).

Q: 8. Can I power this with a 2.5A usb charger? Or a 1A, like I have for my iphone charge cord?

A: The Deity Microphones DQC1 Smart Battery Charger supports 5V, 3A, 9V, 3A, 12V, 3A, 15V, 3A, and 20V, 2.25A power input. Be sure to check both the amperage and the voltage of your charger before attempting to use it for power input.

Q: 9. Is this mic capable with the Sony a7 IV ?

A: The Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone requires a 48V-enabled XLR connection, which is not found directly on the Sony A7IV Camera. To connect the Deity S-Mic 2S to a camera such as the Sony A7IV you would need to implement a camera mixer such as BH #SASRPAX1 Saramonic SR-PAX1 Two-Channel Audio Mixer, which would provide the preamp needed by the Deity S-Mic 2S and calibrate the audio signal to the level expected by the Sony A7IV audio input.

Q: 10. Will this work to pass TC from a Tentacle Sync TC box to an FX30?

A: No. The Deity Microphones C23 Timecode Cable has a locking 3.5mm connector and is intended for use with the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80). The Tentacle Sync E mkII Timecode Generator has a non-locking 3.5mm connector which is not compatible with the C23 Timecode Cable.