Ideal for the mobile entertainer, the portable Eliminator Lighting VF1100 EP is a water-based fog machine designed to create atmospheres that enhance the visual effects of light beams on dance floors, in concerts, at Halloween events, and more.

Capable of dispersing fog with a continuous output of 9000³ feet per minute, this unit fills medium-sized rooms quickly. It features an efficient 850W heater with Electronic Thermo Sensing (ETS) technology, which produces optimum heating levels and leaves less residue. The VF1100 EP comes with a VFEP5R wired remote and a VFEPWR wireless remote. It is also compatible with the VPEPT3 wired timer remote (available separately).

850W Water-Based Fog Machine    Fog Output: 9000 ft³/Minute    Electronic Thermo Sensing (ETS)    Warm-Up Time: 2 Minutes    0.26-Gallon Internal Tank    Fluid-Level Indicator    Fog Output Switch on Rear Panel    Hanging Yoke    Includes Wired and Wireless Remotes

• 850W water-based fog machine for mobile DJs
• Fog output: 9000 ft³/minute
• Electronic Thermo Sensing (ETS) technology for optimum heating levels
• High-efficiency heater leaves less residue
• Warm-up time: 2 minutes
• 0.26-gallon internal fluid tank
• Fluid level indicator
• Low-fog-fluid shut-off sensor to protect the pump
• Fog-output switch on the rear panel
• Includes VF5PR wired remote
• Includes VFWR wireless remote
• Compatible with VFTR13 wired timer remote (available separately)

Related Questions and Answers

Q: 1. Can I use this to power other products with an L battery, like a blackmagic video assist 12G, or is it only possible to use it with atomos products?

A: Yes, The Atomos AtomX Sony L-Series Type Battery Eliminator could be used to power other devices that support Sony NPFL battery plates. Also to send power you would need the following power supply from Atomos https://bhpho.to/3Ib0Lji

Q: 2. Will this work with the SmallHD Focus 7 monitor?

A: Yes, but I would recommend B&H # SMCDCSONYLUS instead.

Q: 3. Is the DC to DC step-down converter in the dummy battery box capable of handling input voltage higher than the average USB 5v? I'm hoping it's one of those step-downs that can handle 4.5 to 12 or 19, etc volts in because I want to use this with hard-wired vehicle power instead of a 12v to USB adapter. I'm not interested in adapters - I only want to know if I can feed in higher voltage and it will correctly convert to the 3.7-4V that the GoPro needs.

A: CamDo has a version that will support up to 24V input.

Q: 4. What size Dtap to DC barrel do I need? On this page Atomos said 2.1mm, on their Cable page they said it is 2.5mm. Why isn't that just a part of the basic description?????

A: The barrel connector on the Atom X battery eliminator is 5.5 x 2.1mm. One would need a D tap to 2.1mm barrel connector such as Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 https://bhpho.to/3Eycd6b or Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 50") BH #KODCTAP21LCK https://bhpho.to/3JoY1jL.

Q: 5. What cable do I need if my set up is Tiltaing Battery Baseplate 12V out to Shinobi? The D-tap cable is for the Camera.

A: This will require the DC to D-tap cable from Atomos (in addition to the battery eliminator)

Q: 6. Will this work with a GoPro Hero 4 Silver?

A: No this will not work on any of GoPro Hero 4 models. The batteries although similar in size are inserted into the GoPro Hero 3 and 4 differently and therefore have the contact leads in different locations. However there is a battery eliminator kit for the GoPro Hero 4 models available here at B&H Photo.

Q: 7. I'd like to rephrase my previous question - If I have a something like a Tilta battery plate with a 12v& 8v output barrel connectors, could I use the 12v output port to connect a male to male barrel cable to this Atomos battery eliminator? Or would I have to use a special cable to screw into the Atomos plate? Also, what are the minimum power requirements? Thank you

A: Response to answer - I apologize for leaving that out. I assumed this one only fit the Ninja V but I guess it can be used on others as well. I have the Ninja V and I am hoping to use this battery eliminator along with a cable to connect to either the DJI Ronin S, OR, a battery plate with DC 12v barrel connector output.

Q: 8. I am trying to connect this to the power junkie and I cannot find a locking dc cable for the life of me. Do you know what cable I can buy that will connect this to the power junkie? The power junkie takes a DC 2.5mm

A: This would be DC to Dtap: https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html. Standard Dtap cable on the other side.

Q: 9. Will the GoPro turn on by istelf once this cable is powered or do you still need to press the ON button physically on camera?

A: Supplying the power is just like putting a charged battery into the GoPro. You still need to turn it on afterwards. Wireless will also be off until re-activated.

Q: 10. Is that the same module that comes with the Atomos Ninja V 4K HDMI Recording Monitor Pro Kit with AtomX SDI Module selled on B&H? It says it comes with a dummy batterie and there are no pictures of it on the kit's page.

A: No, this is a battery eliminator and the Atomos Ninja V 4K HDMI Recording Monitor Pro Kit with AtomX SDI Module is not a battery eliminator, it is an SDI converter.