The Modular Windshield WS 4 Kit (XLR-5F) from Rycote provides you with the accessories needed to prevent or isolate your microphone from up to 50 dB of wind and handling noise. It can be used in various outdoor environments, when maximum isolation from wind and handling noise is required, including such audio applications as weddings, outdoor and water sports, boating, and more. The WS 4 Kit features a modular suspension with pistol grip, a windshield, and a windjammer. Also featured are a boom pole adapter, a CB4 Connbox, and an XLR holder.

The microphone fits on the modular suspension and attaches to the Connbox. The windshield fits onto the suspension and is enclosed around the mic. The fuzzy windjammer then fits over the windshield. This completely modular system can be configured to allow almost any microphone to be shock-mounted. Two Duo-Lyre suspension webs, a brush, and a hex head key are included.

For Stereo Microphones with 5-Pin XLR    Fits Rode NT4 Single Shank Microphone    Fits Audio-Technica AT 835 ST Microphone    Fits Sennheiser MKH 418/418S Microphones    Windjammer Included    CB4 Connbox included    Medium Suspension Included    Pistol Grip Handle Included

Complete isolation is provided against handling noise and cable-borne noises. It also supports the microphone in a cradle using Lyre suspension webs.

The windshield basket completely surrounds the microphone and its connector. It slides onto the Modular Suspension to provide up to 30 dB of wind noise attenuation.

The Windjammer is a synthetic fur cover that is designed to fit over the Modular Windshield, providing an additional 20 dB of wind noise attenuation. It is fitted with a drawstring and toggle for easily fitting on the mic.

Audio-Technica AT 8035 (BP 4029), Rode NT4 (single shank), Sennheiser MKH 418, 418S, and Sony ECM 680S. It is designed to fit microphones with lengths from 9.7 up to 11" (246 to 280mm).

Related Questions and Answers

Q: 1. Can this accomodate a Sanken CS-M1?

A: No. The Rycote WS 9 Modular Windshield Kit is not compatible for use with the Sanken CS-M1 Ultracompact Shotgun Microphone. The WS 9 Windshield is intended for use with microphones that are up to 3.9" long and the CS-M1 is just over that at 4.06" long. As a compatible option, you can use the Rycote Modular Windshield WS 1 Kit MZL (B&H # RYMWS1MZLKIT) which is intended for use with microphones that are 2.8 to 4.7" (71 to 120mm) long.

Q: 2. what is the Windscreen Length?

A: The Rycote Windshield # 4 is 330mm (13 ) in length, 440mm (17.3 ) with the end caps. Designed to accommodate mics up to 280m. (11 )

Q: 3. There has to be a way to attach this to a cold shoe, does anyone know how?

A: Use this adapter: WindTech CM-38 Photo Hot Shoe to 3/8"-16 Male Adapter B&H # WICM38

Q: 4. will this fit a scheops cmit 5u mic ?

A: The compatible Rycote kit is the: Rycote Windshield Kit 4 - Complete Windshield and Suspension System B&H # RYWSK4

Q: 5. Will the Sanken cs1 mic be compatible with this?

A: No, the Rycote Windshield Kit 10 is not large enough for a Sanken CS-1e.

Q: 6. Can an mkh 30 fit inside of this windshield?

A: Sennheiser MKH 30 Dimensions: ø: 0.98 x L: 5.91" / ø: 25 x L: 150 mm The interior dimensions of the Rycote WS 9 Modular Windshield Kit for Sennheiser MKH8020, 8040 and 8050 Mics BH #RYWS9MXBGMZL, will not accomodate a Sennheiser MKH 30 microphone.

Q: 7. I use this with my CMC641, but would like to get a miniCMIT. Any one know if it will work with that?

A: Hi Veronica. Yes, it will definitely work.

Q: 8. Will this work for the DPA 4017b?

A: The Rycote Modular Windshield WS 1 Kit MZL for the Sennheiser MKH 8060 Microphone would be far too short for the DPA 4017b. The Rycote Super-Shield Kit for Shotgun Mics (Medium) (BH #RYSSKM) would be recommended instead.

Q: 9. does this fit sennheiser mke 600?

A: Yes, the Rycote Windshield Kit 4 will fit the Sennheiser MKE 600 microphone. You can also use the Rycote Super-Blimp Kit for Rode NTG & Shotgun Mics 11" Length, 0.7-0.9" Diameter (B&H # RYWKNTG) or the Rycote Super-Shield Kit for Shotgun Mics - Medium (B&H # RYSSKM) or the Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones (B&H # ROBLIMPR).

Q: 10. Will the Sennheiser MKE 600 work with this Blimp?

A: This blimp system is made specifically for stereo microphones, so would not be appropriate for a mono shotgun mic.. I would consider the Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones, BH #ROBLIMPR or the Rycote Windshield Kit for Sennheiser MKH416 & Other Select Shotgun Microphones, BH# RYWMKH416, which would both accommodate the Sennheiser ME66, with the K6 powering module.