The Apollo 52 Motorized Workstation from Inovativ is a fully integrated system that allows users to effortlessly move payloads up to 1200 pounds. It is completely tool-less featuring top and bottom shelves that easily assemble without the use of tools. The power supply is integrated into the bottom shelf drawer and provides additional power distribution when charging to USB-A, USB-C, and US Type-B outlets. The Motorized Apollo continues to meet tough demands with flat-proof tires and corrosion-resistant stainless steel and aluminum construction throughout.

1200 lb Payload Capacity    Forward and Reverse Throttle    Dual 10" Motorized Wheels    Hydraulic-Disc Brake System    Flat-Proof Tires    Weather-Resistant Connectors    Rechargeable Battery    2 x USB-C Connector    4 x USB-A / US Type B Connector    Charges Battery and Powers Outlets

The Apollo uses the rack latch system to easily connect the top and bottom shelves together when packed down. It is designed so that while the motorized wheel system along with the top and bottom shelf remains intact, the top shelf can still be packed down into a more compact configuration.

Soft-close, combo-locking drawers padded with marine carpet are mounted beneath both the top and bottom shelf for safe storage of personal items.

The top shelf features four sides and a hinged front panel that quickly opens for comfortable keyboard access. Removable 3/8"-16 and 1/4"-20 threaded rail plates supply mounting additional accessories.

The upright tubes are secured using a corner-mold lock system that doubles as a location to mount Apollo-specific accessories directly into the cart's upright posts. These four vertical posts are 14% thicker than standard workstation posts and have been positioned at the corners of the cart.

A power-distribution plate features in-line charging and additional power distribution.

The shelves feature hemmed edges for safety and boast a 56% increase in thickness compared to lightweight workstations in order to support heavier payloads.

The Apollo has a fixed height of 40.5" providing a comfortable, standing-height work surface.

The hydraulic brake system is ideal for maneuvering up or down ramps or hills with precision. This system is lever actuated from the handle and applies control to the rear wheels for maximum braking power.

The power supply is integrated into the bottom shelf drawer and provides additional power distribution when charging to USB-A, USB-C, and US Type-B outlets.

Related Questions and Answers

Q: 1. Will this work with a 75mm Ball Head?

A: The Inovativ 100mm Ball Mount, could be converted with a 100mm to 75mm tripod bowl adapter, for use with 75mm bowl heads.

Q: 2. hi! can this suport a 15 macbook pro or a 13 macbook pro? whats the maximun lapto size that suport? thabks!

A: The manufacturer has not published, what the largest size laptop would fit. But they do state it would fit with the latest Macbook Pro computers. That would be both the 13 and 15 inc models.

Q: 3. Will these fit an Impact Turtle Base C-stand?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726 can work with a Impact C-Stand.

Q: 4. Will these fit the Savage C-stands?

A: The Inovativ C-Stand Storage Clamps (Set of 2) BH #IN500726, supports C-Stands that are up to 1.25'' in diameter.

Q: 5. Which of the holes are threaded? What is the size and spacing of the majority of the holes?

A: All of the holes are threaded and use thumb screws that are included for the perfect fit.

Q: 6. Can I drop the 2 step corner mast riser which i currently have in my apollo into the the corners of this system?

A: No, the Inovativ Insight Monitor Mounting System for Apollo 40 & Two Pro Ultra Arms, B&H # INVM40I2PUA2, is not designed to be used with the Inovativ 2-Stage Corner Mast Riser, B&H # IN500627.

Q: 7. Does Inovativ make a travel case for this specifically? Or could the one for the voyager work with this?

A: The Inovativ Apollo 40 EVO Cart BH #INAE0040 collapses down to a flight-ready self-contained case.

Q: 8. will this work with BH #SAABC75V2 ?

A: Yes, the Inovativ 75mm Ball Plate can be used with the Sachtler aktiv Bowl Connector for 75mm Tripod (V2), B&H # SAABC75V2.

Q: 9. Can you put a filter on the front of the lens hood? If so, what size?

A: The thread on the front is not a standard size and will not accept threaded filters.

Q: 10. what is DigiPlate dimensions ? (in metric please)

A: The metric dimensions of the DigiPlate Pro are as follows: L - 44.45 cm, W - 28.2575 cm, H 0.635 cm