Gaming enthusiasts can embrace both style and performance with the modular 011 Dynamic EVO RGB Gaming Case from Lian Li. Featuring a smooth airbrushed metal design with integrated RGB illumination strips and plenty of space for fans and system storage, the 011 Dynamic EVO RGB can turn your system into the centerpiece of your gaming room.

A sturdy and reliable steel frame supports various customizations without compromising general support for your components and a tempered glass window provides you with a clear view of your system. With an adjustable interior, the 011 Dynamic can easily fit your ATX, M-ATX, M-ITX, or E-ATX motherboard with ample room to fit up to ten 120mm or nine 140mm fans comfortably as well as liquid-cooling radiators. Multiple locations allow you to install a wide range of 3.5 and 2.5" storage drives within the secondary chamber, behind the motherboard tray, and on the fan mounting bracket. Seven expansion slots allow you to install a variety of graphics and utility cards up to 17.9" long. A movable I/O panel can be adjusted at the bottom of this case, accommodating users who place their computer on their desk and includes two USB-A and one USB-C 3.2 Gen 1 port.

ATX, M-ATX, M-ITX, and E-ATX    Steel Frame & Tempered Glass Panel    3.5/2.5" Drive Cage    Fan Bracket & Motherboard Storage    7 x Expansion Slots    USB-A & C 3.2 Gen 1 Ports | 3.5mm Jack    Top, Side, Bottom & Rear Fan Support    Radiator Support    Fits GPUs up to 17.9" Long    Supports CPU Coolers up to 6.6"

Easily mount your storage drives all along the inside of the 011 Dynamic EVO RGB with placements including the cage which supports two 3.5 or 2.5" drives, two 3.5" or four 2.5" drives on the side fan bracket, and two 2.5" drives behind the motherboard tray.

Featuring a wide and adjustable case, the 011 Dynamic EVO RGB can support up to a total of ten fans at any given time. Top, side, and bottom mounting points can support either three 120mm or 140mm fans while the rear panel supports a single 120mm fan. As for radiators, the side and bottom brackets can support up to a 360mm radiator while the top can house a single 420mm radiator. The case can also support a wide range of CPU coolers up to 6.6" tall.

At the top and bottom of the case are two L-shaped RGB lighting strips that can be customized using a series of physical buttons present at the top. Easily switch between the 14 different lighting effects, 11 colors, and five brightness levels with the dedicated M, C, and B buttons, respectively.

Sporting a quick-release design, the fan brackets of all three sides can be easily removed or adjusted to meet your layout. Side brackets can be flipped vertically or horizontally, giving you up to four different installation styles. This also allows you to install larger E-ATX motherboards, giving you more space for your components.

The 011 Dynamic EVO RGB features an improved cable management design, featuring large cable management straps near the PSU chamber, dual-layer cable clips that can hold both the bulky and thinner cables, and extended space from the rear of the PSU chamber for more cable management room.

With seven expansion slots, you can equip the 011 Dynamic EVO RGB with graphics cards measuring up to 17.9" long. An integrated GPU holder can support heavier graphics cards, preventing sag and relieving stress from your motherboard's PCIe slot.

Related Questions and Answers

Q: 1. Can the angle of the legs be adjusted individually or do they all have to be set at the same angle?

A: The legs on this table top tripod can move individually

Q: 2. Would these work for flashlights calling for 18650 batteries?

A: Yes, if that flashlight works with 18650 batteries that have a button top.

Q: 3. Does the back of the case have an opening for the screen?

A: FUJIFILM Soft Case for Instax MINI EVO does not have a screen opening in the back. You need to remove the camera from the case in order to use the camera.

Q: 4. Are these working with Tilta Nucleus Nano?

A: Unfortunately, 18650 battery size and performance is not standardized. Thus they vary widely and we cannot say for sure what ones will work. Tilta itself recommends batteries that are no longer available. You should have success with these from Zhiyun-tech. No performance guarantee is possible at this time. https://www.bhphotovideo.com/c/product/1476619-REG/zhiyun_tech_gmb_b118_18650_3_7v_2600mah_batteries.html

Q: 5. Will these work with my Feiyutech a2000 gimbal?

A: Unfortunately, 18650 battery size and performance is not standardized. Thus they vary widely and we cannot say for sure what ones will work. The Feiyutech a2000 does work with 18650 batteries though. However, the EVO Gimbals 18650 have not been tested with the Feiyutech a2000 gimbal.

Q: 6. Will these batteries work with the Nucleus-M follow focus system?

A: The EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries (3-Pack) (B&H# EVO50696) are compatible with the Tilta Nucleus-M Wireless Lens Control System (B&H# TINUCLEUSM). See below: https://bhpho.to/3RZDc2X

Q: 7. are these rechargeable?

A: Yes, the EVO Gimbals IMR-18650 High-Capacity Li-Ion 2600mAh Batteries (3-Pack) are rechargeable. A good option for a charger would be the ikan DLYFULL D4 Smart Charger, BH #IKICHSC4D4.

Q: 8. Will this hold Sony a7r iv with Sony 70-200 f2.8?

A: No, I would suggest a unit that can support more than 5lbs. Review one of the following units for a better support https://bhpho.to/3a2OKx7

Q: 9. Can you put a Leica Sofort 2 in here? Will it fit?

A: Unfortunately, the Leica Sofort 2 has slightly different dimensions than the Instax MINI EVO, so it may not work in the FUJIFILM Soft Case for Instax MINI EVO.

Q: 10. Would these work with flashlights as well?

A: If the flash light accepts 18650 batteries with a button top then yes.