Perform smooth movements with this ultracompact F10 Mini Video Fluid Head from INNOREL. The fluid head includes an Arca-type quick release plate with a 1/4"-20 camera mounting screw and a pan bar with a padded grip. Its 44mm flat base features a 3/8"-16 threaded mounting hole that mounts on a tripod's 3/8"-16 threaded screw.

The tiny head weighs only 12 oz and uses a fluid system to produce smooth pans and tilts for DSLRs and compact video cameras weighing up to 8.8 lb, and it features independent pan and tilt locks. An included smartphone mount and magic arm allow you to mount any phone measuring 2.32 to 3.7" wide.

Video Head with 8.8 lb Payload    44mm Diameter, 3.03" Height    Arca-Type Quick Release Plate, Pan Bar    360° Panning, +90/-90° Tilting    1/4"-20 Accessory Thread    Includes Smartphone Mount & Magic Arm

• For DSLR, mirrorless, or compact video cameras up to 8.8 lb
• Fluid system for smooth 360 pans and +90/-90 tilts
• 44mm base diameter with 3/8"-16 base thread
• Arca-type quick release plate with 1/4"-20 screw
• Dual safety lock system prevents the plate from slipping off the head
• Bubble level
• Pan handle with foam grip
• 1/4"-20 accessory thread on the side
• Includes magic arm and smartphone mount that fits phones from 2.32 to 3.7" wide

Related Questions and Answers

Q: 1. can I use any type of Manfrotto legs with this head (Benro S8)?

A: Yes of course. The video head has a flat base with a 3/8 threaded stud which is the common thread size of most tripods. And if your tripod is a small one or cheap one which may use a 1/4 , you can always buy a 3/8 to 1/4 reducer, but remember that this video head is 5lbs alone.

Q: 2. I have a Manfrotto small tripod head and when I pan left (I think) the head starts to unscrew unless I am panning very slowly. Does this happen with this tripod head or do they have a way to prevent that?

A: No, the miliboo MUF Video Fluid Head should have no issues with unscrewing like that.

Q: 3. Can I use a manfrotto plate with this head? I want to adapt my current plates to this.

A: No, this head will not fit the Manfrotto plate. The only compatible plate is the Benro QR2Pro. https://bhpho.to/3yn77bn

Q: 4. What material is this fluid head made from?

A: Its all metal .. its heavy but sturdy.

Q: 5. is the plate compatible with Manfrotto 577 Rapid Connect Adapter?

A: Yes. All Benro S Series and BV series heads are compatible with the Manfrotto 501PL and 504PLONG plates.

Q: 6. Can this Benro fluid head use the same Arca-type plate that the Benro ball head (specifically the V0) use?

A: No it uses different plates

Q: 7. What is the width of the column where it attaches to the head? Is it wide enough to attach a different flat based tripod head like a manfrotto mvh500?

A: We feel you can attach a Manfrotto MVH500AH Fluid Video Head with Flat Base to the SmallRig CT180 Video Tripod with Mini Fluid Head. However, we strongly do not recommend it. The MVH500AH has much more capacity than the tripod. An accident may occur

Q: 8. Does it take the PU50 OR PU60 PLATES?

A: Neither, the S4H takes PU8080 plates.

Q: 9. What are the upgrades from the older S6 head to the S6Pro?

A: Many of the specs have remained the same. The pan and tilt ranges are the same as is the load capacity. It does however offer 5+0 steps of counterbalance compared to 3+0 Steps on the original S6 model. Also this model adds 1/4"-20 threaded holes on either side of the head to add accessories.

Q: 10. Is this arca compatible?

A: Sorry, no. You could mount a Arca-Swiss baseplate on to this video heads own quick release plate like this one. Delkin Devices Fat Gecko DSLR Camera Mount Quick Release Accessory B&H # DEQRFG