Lightweight and easy to install, Bubblebee Industries The Fur Wind Jacket for Rycote Modular Windshield 3 Kit (Black) is a meticulously designed fur cover that offers superior protection from wind noise in extreme outdoor conditions. Its standout feature is the company's multi-pile faux fur, which is carefully chosen for its ability to diffuse wind noise while preserving the natural tones of your microphone.

The fur is designed in a gradual 3-length pattern that forms a wind-blocking barrier. This significantly reduces unwanted noise, resulting in pristine audio capture. Handmade in Denmark with the highest standards, The Fur Wind Jacket also fits seamlessly over your for Modular Windshield 3 Kit windshield basket, ensuring long-lasting use in demanding environments. The Fur Wind Jacket prioritizes both functionality and comfort for exceptional audio results.

Fits Rycote Modular Windshield 3 Kit    Sound-Attenuating 3-Length Fur Design    Acoustically Transparent Inner Fabric    Secure Attachment Mechanism    Made in Denmark

• The multi-pile faux fur consists of 3 different lengths of fur to slow the wind down gradually and creates a dense layer at the base, which acts as a barrier against wind, allowing you to capture clean audio in very windy conditions.

• Using the highest quality materials, The Fur Wind Jacket is designed to withstand rigorous use in the most demanding of recording environments for many years.
• The outer layer uses super soft strands of faux fur, while the inner layer of fabric is made using a non-abrasive, open material that's also acoustically transparent.
• This provides you with optimal wind protection, while retaining as much of the natural frequency response of your microphone as possible.

• The Fur Wind Jacket seamlessly integrates with your Rycote Modular Windshield 3 Kit basket. Its tailored design ensures a perfect fit, guaranteeing optimal wind protection without hindering the functionality or performance of your existing equipment.
• This model features a bespoke and secure attachment mechanism, allowing for quick and easy installation onto your Modular Windshield 3 Kit system.

Related Questions and Answers

Q: 1. Would this grip and suspension work with the Rycote 21mm BBG as an alternative to the kit included blimp and softie? Would like to use this for it's handling noise features with an AT BP4025 and have the BBG as a smaller footprint option to the blimp.

A: The grip and suspension found within Rycote Modular Windshield Kit WS 3 with XLR-5F and Connbox CB4 would not work with the Rycote BBG Windshield, as the BBG does not accommodate internal suspensions and is designed for covering the head of the microphone only, as opposed to encapsulating the entire microphone.

Q: 2. dose this work well for a Podcast?

A: Yes you will need a mic stand or boom table arm also depending on what device you like a mixer of interface you will need a n xltr converter https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html?sts=pi&pim=Y

Q: 3. Can this be used with the Sennheiser MKH 8060?

A: No. The Rycote Modular Windshield Kit WS 3 includes the Connbox CB4 which is compatible for use with stereo microphones that have a 5-pin XLR connector. The Sennheiser MKH 8060 Short Shotgun Microphone uses a standard 3-pin XLR connector. A similar compatible windshield kit is the Rycote 086067 Modular Windshield WS 1 Kit MZL for the Sennheiser MKH 8060 Microphone (B&H # RYMWS1MZLKIT). You can also use the Rycote 010320 Super-Shield Kit for Shotgun Mics - Small (B&H # RYSSKS) or the RODE Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones (B&H # ROBLIMPR).

Q: 4. do we put this under the bobcat or is this seperate?

A: Hi there, Nicholas: thanks very much for your question. This product is intended for use on its own (i.e. without/in place of our fur Windjammers). You can use it over the basket and then apply a Windjammer on top, but this mostly leads to reduced high frequency content, and doesn't have that much benefit in terms of additional wind protection. The HWC is a good option on its own if you need something less obtrusive than fur, or don't want to suffer as much HF loss c. 6000 Hz. That said, our fur is renowned for its high level of acoustic transparency, so the other/more important aspect to consider might be whether you intend to use your windshield in very windy conditions. For that, chose a Windjammer; for moderate winds, the HWC would perhaps be a good bet. Hope that helps! MF.

Q: 5. Will the Sennheiser MKE 600 work with this Blimp?

A: This blimp system is made specifically for stereo microphones, so would not be appropriate for a mono shotgun mic.. I would consider the Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones, BH #ROBLIMPR or the Rycote Windshield Kit for Sennheiser MKH416 & Other Select Shotgun Microphones, BH# RYWMKH416, which would both accommodate the Sennheiser ME66, with the K6 powering module.

Q: 6. Is it compatible with the Canon Vixia G40?

A: I use it with a Canon 70D and its great. If the G40 has a mic input I'd say yes.

Q: 7. There has to be a way to attach this to a cold shoe, does anyone know how?

A: Use this adapter: WindTech CM-38 Photo Hot Shoe to 3/8"-16 Male Adapter B&H # WICM38

Q: 8. Can anyone tell me the thread size on the bottom of this unit (for boom pole, etc)? I need to adapt it to an old-school mic stand. Thanks!

A: Hi Jeff: thanks for your question. It's 3/8 . If your old-school stand is 5/8 , you can use the following adapter: a href= http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/. target= _blank http://mymic.rycote.com/products/brass-3_8-m-to-5_8-f-screw-adaptor/./a Basically, any 3/8 M to required size adapter will work. I hope that helps!

Q: 9. I received this microphone and I was hoping to use it on top of my Sony Handycam. Unfortunately, it is not the same type of fitting. I can't find an adaptor. Any thought? (Aside of using one of those mounts)

A: To mount the Rode VideoMic Pro to a Sony Handycam or similar camcorder will require a mounting bracket. The Vello CB-510 is a recommended mount.

Q: 10. Can I put the Hi-Wind Cover on the Rode Blimp and additionally add Rode Blimp Windshield(BH #ROBLIMPR) or Rode DeadWombat Windshield(BH #RODEADWOMBAT)?

A: No, the Rycote Hi-Wind Cover is designed to fit directly over the surface of the blimp and not over any additional windshields.