The 10-foot WCA 104 XLR Male to XLR Female Cable from Williams Sound can be used for sending balanced line or mic level sources to the inputs of the IC-2.

IC-2 - Interpreter Control Console

Related Questions and Answers

Q: 1. Is this a balanced cable

A: The Mogami Gold 3.5mm TRS Male to Dual XLR Female Y-Cable (10') is not a balanced cable. 3.5mm stereo TRS is not a balanced connection, so even though the input connectors are XLR the signal going through the cable cannot be balanced.

Q: 2. would this power the Digital Bolex?

A: Yes, The CAMVATE Coiled D-Tap Male to 4-Pin XLR will be able to connect and power the Digital Bolex cinema camera.

Q: 3. What is the weight of this cable, without packaging?

A: The Cable Techniques 10" CT-LPXR weighs 1.8 ounces.

Q: 4. What is the length of each segment -- that is, from an individual XLR plug to where it enters the four-cable bundle, and the segment where the four cables are bundled together? For instance, if the "fanned" portions were 2' each and the bundled portion were 10', it would be 14' from a male XLR plug to its matching female plug.

A: I just measured my cable, and each fan is approximately 2' and the bundled segment is about 6', so the total length (XLR male to XLR female) is the advertised 10'. You do not get a "bonus" 4' due to the two fans -- their length is included.

Q: 5. Are all 4 pins wired?

A: Pinout of 4-pin XLR connector used for 12V powerThe 4 pin male XLR connector is found on nearly all professional location video equipment. It is used for an external 12 volt DC input. Pinout: pin 1 = negative pin 4 = positiveNo connections are made to either pin 2 or 3. NOTE: Check and double check that the wiring is correct to your equipment before connecting this to any expensive video gear. Mistakes can be costly to you.

Q: 6. I'm getting a buzz with this cable connected directly from a microphone to an amp-- anyone else?

A: That is a balanced connector cable for LINE level signals, if you are using that cable to connect a microphone, it is not the correct cable. https://www.bhphotovideo.com/c/product/828155-REG/Hosa_Technology_HMIC_010HZ_HMIC_010HZ_Pro_Mic_Cable.html This is the correct cable for microphones.

Q: 7. is it attachable with Ambient Recording QAT-ECO?

A: The Ambient Recording QAT-ECO should be able to fit just below the colored cap on the XLR connector.

Q: 8. I'm getting a hum with this cable when connecting directly from a microphone to an amp-- how to resolve?

A: In order to assist you we will need you to provide more details about the microphone that you are using and the amplifier that you are connecting to. These are important factors that need to be taken into consideration to determine whether there may be a compatibility issue, a problem with grounding, or if you may need a different cable or something else. Please contact us by phone or through live chat on the website and we will be happy to help.

Q: 9. are all 4 pins wired?

A: No, only pins 1 and 4 are wired.

Q: 10. need country of origin for XLM5-XLF5-10 please?

A: The Sescom XLM5-XLF5-10 Belden Star-Quad & Neutrik 5-Pin XLR Male to 5-Pin XLR Female Audio Cable is manufactured in the United States.