Control and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I/O and functionality. This model includes three 4-channel input cards and one 4-channel output card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

Standard I/O: 4 Inputs & 4 Outputs    10/100 Ethernet and RS-232 Interfaces    24-Bit A/D-D/A Audio Resolution    Extensive DSP via Protea Software Suite    Easy and Intuitive User Interface    Option Bays for Expanded Functionality    Windows Compatible

• 10/100 Ethernet & RS-232 computer interface standard
• Extensive DSP available
• Easy and intuitive user interface
• Mic/line inputs
• 24-bit A/D–D/A audio resolution
• Up to 24 channels of audio processing
• 4x4 base unit configuration
• Expand inputs or outputs 4 channels per module
• Modules easily field installable
• Euroblock connectors for audio, preset recall, DC remote level control, and data in/out
• 31 preset locations
• Remote controls for level, preset recall, and programmable functions
• Third-party control-friendly
• Input and output metering viewable in dBu
• Multilevel security

• Input source selection
• Brick wall limiter
• Compressor
• Autoleveler controls
• Ambient noise compensation (output only)
• Ducking (high/low priority, trigger, filibuster, ducked program)
• Gate
  • Advanced gate controls
• Gain
• EQ:
  • 15-band parametric
  • High/Low Shelf 6/12 dB per octave
  • All-Pass
  • Variable Q HP/LP
  • Notch/Band-Pass
• Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
• Delay:
  • Input time, distance, and temperature at 48 kHz sampling rate
  • Input time, distance, and temperature at 96 kHz sampling rate
• Audio metering tool
• Signal Generator Tool (pink noise, white noise, sine wave)
• Matrix mixer
• Processors

Related Questions and Answers

Q: 1. Can i connect one cd player to three amplifiers to be used one at a time only?

A: The Rolls SS32 Mini Route 3 will not allow you to select the amplifier that is active. All three outputs will be live. You can consider however the Hosa Technology SLW-333. Just make sure to get either some rca to phone cables, or adapters; B&H# HOHPR005X2, B&H# HOAPMRF.

Q: 2. I need to make a direct hdmi connection over 100ft. Can I use this with a 75 ft cable to say a 30 ft cable to extend my reach?

A: No, at 1080p (60 Hz) the HDBOOST4K supports a maximum 50 ft (15 m) cable at the source, and 65 ft (20 m) cable to the display, which provides a total length of 115 ft (35 m). Atha, StarTech.com Support

Q: 3. There's no way to bring in a signal via HDMI, scale it, and also bring in a signal via SDI, scale that, and then select which one is output depending on which one I needed to send to a projector for instance is there?Basically, I want to send to MacBook's to an ATEM Television Studio so be switched between them and cameras and displayed on projection screens. My understanding is that I'll have to convert the signal before it gets to the Switcher. So can this Teranex handle 2 inputs, or can it only take one in, convert it, and spit that same one out?

A: You can use the Teranex to scale the two signals, then go to the MacBook next to the switcher via the LAN connection.

Q: 4. How does it compare in terms of quality with the Klark Teknik DI10P also offered in this website? Tech specs of DI-10P seem more comprehensive

A: Between the two units, the Klark Teknik would be the better buy due to the Midas designed transformers and a wider frequency response.

Q: 5. I am looking at the IOGEAR Wireless 5 x 2 HD Matrix Pro with Three Additional Receivers. Question 1. Is there an option for yet another receiver - five all together? Question 2. Are there other product choices that accomplish the same thing

A: This system is not expandable beyond this kit.

Q: 6. Can you use LUT's with this product?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, does not support using LUTs at this time.

Q: 7. Can this be used to stream to Zoom or other video conferencing apps?

A: The Atomos Ninja Phone Video Co-Processor, B&H # ATOMNJPB01, should work with a streaming application like Zoom; however, we could not guarantee it since this is not something we test. At the time of this message, Atomos mentions it can stream to Facebook, YouTube, and Twitch.

Q: 8. I am looking at the IOGEAR Wireless 5 x 2 HD Matrix Pro with Three Additional Receivers, are there any other product choices that accomplish the same idea?

A: We do not offer a similar product with the same functionality.

Q: 9. Can I connect 2 amps ( 1 tube & 1 hifi ) to a pair of speakers. The tube amp only has RCA input and banana plugs out. The hifi has RCA input, RCA line output and banana plugs out.

A: Unfortunately you cannot. The SS32 Mini Route 3 is only made for one source with outs.

Q: 10. Does the ground lift switch is only for XLR balanced output or for also RCA output unbalanced

A: The ground lift switch is for disconnecting the ground of the XLR jack only from the ground of the DB14b.