The ErgoReach EW1 Premium Ergonomic Dual Monitor Wall Mount Arm from Rocstor holds two displays up to 27" and 15.4 lb. The wall mounting requires only one stud for more flexibility when setting up. Portrait and landscape support allows for dynamic use in offices and at home. The monitors can be adjusted to improve viewing angles and avoid glares using the -45 to 90° of tilt and ±90° of swivel. Aluminum construction and integrated cable management makes for a durable and practical design that is both sleek and professional.

Holds Two Displays up to 27"    15.4 lb Weight Capacity per Display    Single-Stud Wall Mounting    -45 to 90° of Tilt    ±90° of Swivel    Aluminum Construction

Related Questions and Answers

Q: 1. which brand tripod will this fit on?

A: Any tripod with a 3/8"-16 mounting screw (almost all of them) or 1/4"-20 (using a bushing adapter) will work with this dual mount arm. Due to the increase in load/torque using this mounting arm, we recommend a heavier duty tripod for more stability.

Q: 2. Does this mount allow for mounting to a table by drilling bolts through the actual table? I've used single monitor mounts that have the table clams and/or drilling through the table.

A: I am afraid not. The LeviTouch easily attaches to most desks up to 3.5" thick, and only requires 2.5" of mounting depth on the underside. Simply tighten the clamp around the edge of your desk, no tools are required.

Q: 3. Will this mount to a standing desk like this one? https://www.bhphotovideo.com/c/product/1364097-REG/luxor_lvlup_pro32_bk_lvlup_pro_32_bk_desk.html

A: TheGabor LeviTouch Dual-Arm Monitor Desktop Mount BH #GADM502 will mount to most standing desks, including our Luxor Two-Tier Pneumatic Standing Desk Converter (Black) BH #LUCVTRPROBK. There is a possibility that the desk will be a bit too rear-heavy, becoming unbalanced when being moved from lower to upper positions. We are not able to physically test this combination. Please note; Load Capacity (desk): 35 lb / 15.9 kg Gabor dual monitor arm: Supports Monitors from 15 to 27" Supports up to 17.6 Pounds per Arm

Q: 4. What is the battery pack? Is that to power the camera or the steadicam itself?

A: The battery powers the Steadicam monitor. No power is required for the Steadicam, it works based upon proper balance and is gravity powered. The camera runs on its own battery.

Q: 5. Would my MSI monitor be too heavy for the arm? It weighs in at 19.215lb. BH #MSSAMSG274R2 MFR #OPTIXMAG274R2

A: The Gabor Levitouch Dual-Arm Desktop Monitor Mount for Two 17 to 32" Displays BH #GADM552 holds displays up to 19.8 lbs. each. The MSI Optix MAG274R2 27" 16:9 G-SYNC 165 Hz HDR IPS Gaming Monitor B&H # MSSAMSG274R2 weighs 13.34 lbs.

Q: 6. what is the mounting bracket size restrictions? I have a desk that is 3" thick

A: For the Uncaged Ergonomics Computer Monitor Arm Mount with USB Ports BH #UNMMB, this monitor arm mounts to your desk via the included C-Clamp or Grommet Mount. The C-Clamp is adjustable to fit a range of desktop thicknesses. At the widest setting, the opening is approximately 3 1/8".

Q: 7. does this come with security hardware?

A: The Peerless-AV PLAV70-UNLP Articulating arm includes wall plate, arm, mounting and screen attachment hardware, cable ties, mesh cord sheath and adapter plate. No security hardware is provided.

Q: 8. What adapter do I need to connect to macbook pro?

A: Depending on the available output ports on your Macbook Pro (based on model/generation) you can use either the supplied HDMI cable or USB-C cable to connect the LG 27" BN88Q-B monitor to your MBP as a display.

Q: 9. How much weight can it hold? Looking to hold a small-ish monitor and a Black Magic switcher.

A: The total weight support of the Axler RECODO Dual Head Mount Y Arm is 5.5 pounds. Basically, about 3lbs per arm.

Q: 10. Does it flip to low mode?

A: If it's balanced so that it's top heavy you can fly it upside down and then horizonally flip the image in post production.