Blackmagic Video Camera 4K

Blackmagic Design Videohub 80x80 12g Zero-latency Video Router

Product Code: ga143257
Availability: In Stock

$29,985.00 $47,976.00

Qty

0 reviews Write a review

Description
Reviews (0)

Support a mix of multiple video formats using the Videohub 80x80 12G Zero-Latency Video Router from Blackmagic Design. This advanced router provides 80 x 12G-SDI inputs and 80 x 12G-SDI outputs for routing any combination of SD, HD, UHD 4K, and DCI 4K video. The Videohub 80x80 12G centralizes all your SDI cables in one hub, enabling you to connect any video input to any video output, or even a single video input to multiple video outputs while eliminating clusters of cables and the need for complex diagrams. This versatile unit can be used with multiple HyperDeck recorders for redundant mastering to route video to multiple streaming processors for all your broadcast platforms, or to add extra inputs to an ATEM switcher.

Zero-Latency Routing Switcher 80 x 12G-SDI Inputs/80 x 12G-SDI Outputs Supports up to DCI 4K60 Video Combines SD, HD, UHD 4K & DCI 4K Video 4:2:2 & 4:4:4 Video Sampling Supported Push-Button, Knob & Ethernet Control 32 Channels of Embedded Audio SDI Reclocking Includes Videohub Mac/Windows Software

Processing
Switching Type	Pushbutton, Software
Processing Resolution	DCI 4K at 60
Color Processing	8-Bit 4:2:2 10-Bit 4:2:2 12-Bit 4:4:4
Audio Processing	48 kHz / 24-Bit
Input
Video Inputs	80x BNC (12G-SDI)
Input Video Format	SDI (10/12-Bit 4:4:4 RGB, YUV) DCI 4K up to 30 fps UHD 4K up to 30 fps DCI 2K up to 60 fps DCI 2KPsF up to 30 fps 1080p up to 60 fps 1080PsF up to 30 fps 1080i up to 60 fps SDI (10-Bit 4:2:2 RGB, YUV) DCI 4K up to 60 fps UHD 4K up to 60 fps DCI 2K up to 60 fps DCI 2KPsF up to 30 fps 1080p up to 60 fps 1080PsF up to 30 fps 1080i up to 60 fps 720p at 50/59.94/60 fps 576i / 625 lines at 50 fps 480i / 525 lines at 59.94 fps
Embedded Audio Input	SDI
Output
Video Outputs	80x BNC (12G-SDI)
Output Video Format	SDI (10/12-Bit 4:4:4 RGB, YUV) DCI 4K up to 30 fps UHD 4K up to 30 fps DCI 2K up to 60 fps DCI 2KPsF up to 30 fps 1080p up to 60 fps 1080PsF up to 30 fps 1080i up to 60 fps SDI (10-Bit 4:2:2 RGB, YUV) DCI 4K up to 60 fps UHD 4K up to 60 fps DCI 2K up to 60 fps DCI 2KPsF up to 30 fps 1080p up to 60 fps 1080PsF up to 30 fps 1080i up to 60 fps 720p at 50/59.94/60 fps 576i / 625 lines at 50 fps 480i / 525 lines at 59.94 fps
Embedded Audio Output	SDI
Connectivity
Other I/O	1x RJ45 LAN 1x USB-C 1x BNC Reference Input 1x BNC Reference Output
Video Standard Compliance	SMPTE 259M/292M/296M/372M/424M/425M-A/425M-B/ST-2081-1/ST-2081-10/ST-2082-10 ITU -R BT.601/BT.656
Display
Display Size	5"
Hardware
OS Compatibility	macOS 12 or Later / Windows 10 or Later
OS Compatibility	macOS 12.0 macOS 13.0 or Later Windows 10 (64-Bit Only) Windows 11
Wi-Fi	No
Bluetooth	No
Power
Power I/O	2x IEC C14 (100 to 240 VAC ) Input
Power Consumption	92 W
General
Operating Conditions	32 to 104°F / 0 to 40°C up to 90% Humidity
Storage Conditions	-4 to 140°F / -20 to 60°C
Rack Form Factor	4 RU
Dimensions	19 x 9.37 x 6.96" / 48.3 x 23.8 x 17.68 cm
Weight	24 lb / 10.9 kg
Packaging Info
Package Weight	27.07 lb
Box Dimensions (LxWxH)	20.9 x 11.2 x 10.5"

Related Questions and Answers

Q: 1. If I have 12G SDI cables plugged into this, and send a 12G signal (4k 60p), what would happen? Would it down-convert it somehow and send a 6G signal out? Or would it just not work?

A: Sending a 12G signal will not work and will not down-convert to a 6G signal.

Q: 2. Can you create Macros with the CleanSwitch 12X12?

A: Creating macros is not listed as an ability of the Blackmagic Design Smart Videohub CleanSwitch.

Q: 3. What is the country of origin?

A: Australia

Q: 4. Will this switch act as a signal booster? I have very long cable runs planned to connect to this cleanswitch, and then another fairly long cable run from the cleanswitch to an ATEM switcher. I need it for its routing abilities too, but my biggest concern is signal loss.

A: All SDI signals will be reclocked in the Videohub. If the signal properly makes it to the Videohub you will be able to transmit a clean output signal.

Q: 5. will this box pass closed captioning information?

A: Yes SDI closed captions are supported.

Q: 6. If I buy another RX will it connect with my existing TX for my Trigyn Apex 5G1K? Also do you have D-Tap to 4pin Lemo cables with RIGHT-ANGLE ?

A: Yes it will. You can use up to 4 receivers with a single Trigyn Apex 5G1K system. However we do not have D-Tap cables for this product available for a separate purchase at this time.

Q: 7. HelloI want to replace a Kramer 4X4 matrix with this one.If i use this on am i going to have any delay when switching between inputs or is it better to use the non CleanSwitch version?I ask this because i suppose (i hope i am wrong) that if this one tries to keep all devices in synced in frame it may cause a bit of delay.Is it the proper device to use as a matrix/switcher on live events?thanks

A: We use this unit and also the older version that does not clean switch. Biggest difference between the two for us is the newer one does not lose signal while switching, which is nice, but it does add about 1 frame delay to the signal. We run our camera line through this and then to the ATEM switcher out to a projector, and there is a slight delay between what happens live on stage and what is seen on screen.

Q: 8. Will this device carry the audio over sdi?

A: Yes it will

Q: 9. I currently have 3G cables running to all my cameras and devices, does this unit accept the 3G signals or what?

A: As Blackmagic Design has stated, 3G cables would be fine for short distances of 6G signals or at greater lengths for 3G signals. If you plan on using 4K content, you may want to consider upgrading cables if your distance is significant.

Q: 10. I want to run 3 SDI cables into the videohub and have just one output that goes into a coaxial drop that pushes out a live feed over cablecast (this is for public access). In theory this should work but is there anything I'm missing here?

A: Are all 3 SDI signals the same resolution and frame rate? If so, then maybe an ATEM switcher might be better suited. But yes, this will work.

There are no reviews for this product.