Hosa Technology's Straight 1/4" Plug Male to Straight 1/4" Plug Male Edge Guitar Cable is a 10' cable that is designed to provide performance. This cable has Neutrik plugs and delivers a neutral and dynamic tone.

Neutrik connectors for security and durability

20 AWG Oxygen-Free Copper (OFC) conductors to reduce resistance

Low capacitance wire for a crystal-clear high end

Related Questions and Answers

Q: 1. Can this cable be used as a TDIF cable to connect a Tascam digital multitrack to a Tascam digital mixer, i.e. MX2424 recorder to a DM3200 mixer?

A: The TDIF cable recommended by Tascam to hook up the DM3200 Mixer to Tascam Multi Track recorders is B&H # HOT25253.

Q: 2. Are these shielded against RF interference?

A: These are not ballanced cables and can be susceptibe to RF issues.

Q: 3. To be certain I need extension cable with 1.4" male connector to Denon receiver and 1/8" female connector ro headset-correct?

A: Yes that is correct this cable is exactly how you described it. 1/8 female to 1/4 male im assuming your connecting the 1/4 inch male to the headpone output on your Denon Receiver if so this is what you need.

Q: 4. How will these work between an audio interface and a pair of powered nearfield monitors?Which is ideal, balanced or unbalanced cables?Thank you.

A: The Hosa HSS-005 is a solid choice for a well priced quality cable. Powered monitor inputs and audio interface outputs are generally designed to be used with balanced cables. This is usually noted in the documentation, and in the case of the monitors printed directly on the unit. The benefit of a balanced cable would be superior rejection of RF into the cable vs. an unbalanced cable. This will come into play for longer cable runs.

Q: 5. Will this cord work with an iPad for shooting video?

A: No! It will send you audio signal to where ever you plug it in, which would have to be that accepts XLR connectors. This is an audio cable and will not work with digital video, unless you are transferring or sending the audio signal which can be separated from the video with pro equipment. Based on your question, you probably are not a professional. By the way, the industry term is cable . Cord refers to lamp cord, or what's called zip cord. It's used on all sorts of consumer products, but is not suitable for anything other than the power source, that is plugging into an electrical outlet.

Q: 6. Can I use this cable to go from my pickup jack in my guitar to two amps?

A: The Hosa Technology STP-204 Stereo 1/4" Male to 2 Mono 1/4" Male Y-Cable will only work with your guitar if it is wired with a stereo output signal which is not a common configuration for a typical electric guitar. If your guitar has standard wiring with mono output signal, the Hosa Technology 1/4" Male to Two 1/4" Female Y-Cable (B&H # HOYCPM2PF) would be the more ideal solution to split the guitar's signal out to two amplifiers at the same time. Standard instrument cables can be used to connect from the female jacks on the Y-cable to the input jack on each amplifier.

Q: 7. will this cable work AND supply phantom power to a Shure VP88 stereo mic?

A: Yes, this Cable Techniques Y-cable will work with the Shure VP88. In order to power the mic, each of the 3-pin XLR connectors must be connected to a phantom power

Q: 8. Hi. Can I make DC power cable for Zoom F series ?

A: Yes you can make a DC power supply with this connector.

Q: 9. Is this a stereo cable? need it for electric piano to receiver...

A: This is not meant to be stereo cable. However it will work as stereo cable. Just to keep in mind - this cable is more for PA systems or average home studio systems and not of a category for high end audio or hifi audio. This cable seems to have higher resistance than normal stereo cable in my experience.

Q: 10. What is the distance of the spread of 2 XLRs from the Y-junction?

A: It splits in the middle, so approximately 5 feet on each end, meaning the spread would be approximately 10 feet. Best regards, Hosa Support.