Hosa Technology's Straight 1/4" Plug Male to Right Angle 1/4" Plug Male Edge Guitar Cable is a 15' cable that is designed to provide performance. This cable has Neutrik plugs and delivers a neutral and dynamic tone.

Neutrik connectors for security and durability

20 AWG Oxygen-Free Copper (OFC) conductors to reduce resistance

Low capacitance wire for a crystal-clear high end

Related Questions and Answers

Q: 1. What is the length of the audio cable?

A: On one end the audio whip is about 8 and the other end is about 20 both of the ends have the audio cable coming out of the back side of the 15 pin connector at the molded strain relief

Q: 2. Is this product a Headphone Distributor. I need to send one stereo output equally to two stereo headphones?

A: This headphone splitter gives 1/4 male TRS (stereo) to dual 3.5mm female TRS meaning both outs are stereo so it will work with your headphones

Q: 3. Does this work on the Fx6?

A: Yes, the SHAPE Coiled 3.5mm Right-Angle LANC Male to Straight Female Cable (10-20") is compatible with the Sony FX6.

Q: 4. To be certain I need extension cable with 1.4" male connector to Denon receiver and 1/8" female connector ro headset-correct?

A: Yes that is correct this cable is exactly how you described it. 1/8 female to 1/4 male im assuming your connecting the 1/4 inch male to the headpone output on your Denon Receiver if so this is what you need.

Q: 5. Do these cables work with turntables..?

A: I use it. It is not too bad

Q: 6. Are these XLR Male connectors nickel, silver, or any plated?

A: These should be nickel plated.

Q: 7. (1) Can you give the specific pin wiring for this cable? I need pins 2-3-1 of the Neutrik XLR wired respectively to the Tip, Ring, and Sleeve of the mini plug for use with a RED Epic microphone input from standard XLR mic out.(2) Is the angle of the cable out of the Neutrik connector user-adjustable to different positions? I would need the cable to outlet at a counterclockwise right angle to the standard configuration shown in the photo.(3) How flexible is the cable? It appears so thick that it would lack malleability in a 1.5 foot length.

A: The Hosa MXM-001.5RS is wired to the standard, Pin 2 to Tip, Pin 3 to Ring, Pin 1 to Sleeve. The XLR connector is non rotating and oriented according to the photo provided. The conductors are 24 gauge allowing some flexibility in the cable.

Q: 8. Is this a stereo cable? need it for electric piano to receiver...

A: This is not meant to be stereo cable. However it will work as stereo cable. Just to keep in mind - this cable is more for PA systems or average home studio systems and not of a category for high end audio or hifi audio. This cable seems to have higher resistance than normal stereo cable in my experience.

Q: 9. I bought this to use with Tascam DR-40 and Audio Technica AT8024. The input level is too low for recording even with maxed out preamp level. How do I use this combo? Is this adapter right for AT8024?

A: The Tascam DR-40 only accept mic level devices via its XLR inputs. This adapter is incorrect. To connect the AT8024 in mono to the recorder, you would require an XLR adapter such as the Kopul A-XMMF. To use the mic in stereo, you will need a stereo mini to dual XLR Y cable such as the Kopul SMYC-M2XM06 and then an additional 3.5mm stereo turnaround adapter to connect to the mic. See the Hosa Technology GMM303.

Q: 10. Does this cable have a foil shield?

A: I am sorry but the manufacturer has not provided any information about the type of shielding used for this cable.