Ideal for fast turnaround productions where there is no time for post, live broadcast and streaming, preview on set, feeds to video village, IFB feeds, rough guide mixes, and more, the Sound Devices NoiseAssist Plug-In for MixPre-10 II Recorder is used to suppress unwanted background noise instantly. Featuring an advanced signal-processing algorithm, the plug-in reduces noises such as traffic, generators, HVAC noise, and more, while preserving dialog clarity. NoiseAssist continuously monitors background noise to give you clean audio for the entire take.

This version of NoiseAssist provides 1 instance. Up 2 instances can run simultaneously on your MixPre II.

Suppress Background Noise Instantly    For MixPre-10 II Recorder    1 Instance

• An instance is a single occurrence of NoiseAssist. You can set an instance of NoiseAssist to run in one place on your MixPre.
• An instance can be applied to any single channel, any single bus, or mix track (L or R).
• If you have the two-instance NoiseAssist plug-in, you can apply NoiseAssist in any two places, for example, on Bus L and Bus R, on two channels, or a channel and a bus.
• NoiseAssist can be used at sample rates 48.048 kHz and less, and at 24 or 32-bit float bit depth.

Related Questions and Answers

Q: 1. Can I use the TA3 outputs for IFB?

A: Yes, the Sound Devices MixPre-10 II's TA3 outputs could be used with an IFB system.

Q: 2. Can I connect a black lion word clock when using this as a recording interface?

A: Yes, the Sound Devices MixPre-10 II Multitrack Field Recorder can be connected to a Black Lion Word Clock. As per Sound Devices, just set your BNC input and/or output to WC.

Q: 3. It is possible to power it with a dtap battery and a herose adapter?

A: Hi Dario. Sure, you can power the MixPre-10 II with a dtap battery w/hirose connector. Just make sure voltage from the battery is 10 - 18 volts.

Q: 4. Do I need a buy an external Time Code or the integrated one is good enough?

A: This unit has a built in time code generator, although it will sync if you prefer to use an additional generator.

Q: 5. Trying to use MX-LMount L-Series Battery Sled with two L-Series batteries connected, but when I power it on, all tracks on the MixPre-10 II start blinking/flashing red (on the ring LED around each track fader). I've tried using the battery sled with a pair of genuine Sony NP-F970 batteries, and also with a pair of genuine Sony NP-F570 batteries, and all of them are having the same problem. I have already switched the battery type to L-Mount in the MixPre-10 II's power menu. Batteries are fully charged. No other batteries/power sources are connected. Any idea what could be causing this?

A: I would suggest calling Sound Devices technical support.

Q: 6. Can anyone recommend a wireless system to send audio from the balanced MixPre outputs to a BMPCC 6k Pro?

A: To send audio wirelessly from the balanced outputs on the Sound Devices MixPre-10 II Multitrack Recorder to a Blackmagic Design Pocket Cinema Camera 6K Pro, you can use the Remote Audio Unbalanced Adapter Cable TA3F to 3.5mm Locking TRS for Sennheiser Transmitters (B&H # RECASENSK1TL) or the Cable Techniques RX-TRSBL Locking 3.5mm Male to TA3F Receiver Cable (B&H # CARXTRSBL) to connect the TA3 (3-pin mini-XLR) output from the MixPre-10 II to a Sennheiser EW series wireless bodypack transmitter or a similar type of wireless bodypack transmitter. For example, you can use a wireless microphone system like the Sennheiser EW 112P G4 Camera-Mount Wireless Omni Lavalier Microphone System which will accept line level input signal. The Sennheiser system has only one channel, so you will need to purchase two of the Sennheiser systems if you want to send wireless audio from both the left and right outputs on the MixPre-10 II to the BMPCC camera. To connect the output from the wireless receiver to the TA3 input on the camera, you can use the Kondor Blue Mini-XLR Male to Locking 3.5mm Stereo Cable for BMPCC 6K & 4K (B&H # KOMINIPLSBK).

Q: 7. am I crazy or does this device shut off all mic inputs other than 1-4 in ambisonic mode? this would mean while using the ambeo i cannot plug in any other microphones?

A: That is correct, only channels 1-4 can be operated for ambisonic recording .

Q: 8. Is it best practice to turn off phantom power before turning off the device in beginner mode? Thank you for your time.

A: You do not have to turn off the phantom power before turning on the MixPre-10 II. It is advisable that you do not have the phantom power turned on when only using dynamic mics, or battery powered mics, as it will consume more battery power from the recorder unnecessarily.

Q: 9. does the Mix Pre ii it's possible record to a USB C flash drive?

A: According to Sound Devices approved media list; it is compatible with USB-C flash drives. https://www.sounddevices.com/mixpre-series-approved-media-list/

Q: 10. is it possible to use the ambeo in conjunction with additional microphones in inputs 5-8?

A: Yes. The Sennheiser AMBEO VR 3D Microphone BH #SEAVRM offers 4 Matched KE 14 Cardioid Capsules in Ambisonics A-format arrangement: 1: front-left-up (FLU) 2: front-right-down (FRD) 3: back-left-down (BLD) 4: back-right-up (BRU) Mixing to B-Format: W: FLU + FRD + BLD + BRU X: FLU + FRD - BLD - BRU Y: FLU - FRD + BLD - BRU Z: FLU - FRD - BLD + BRU A split cable 4XLR is included in the box..