Mount larger and heavier lenses onto your DJI Ronin 2 with this PRO Dovetail Wing for ARRI 35/ALEXA Mini pair, used as part of the CineMilled Counterweight System. These dovetail wings feature 3/8"-16 and 1/4"-20 threads for adding individual counterweights to balance your camera on the gimbal. The wings adjust weight distribution and can be used together or individually.

For CineMilled Upper Pro Dovetail    For ARRI 35 and ALEXA Mini    Helps Balance DJI Ronin 2 Gimbal    Part of Counterweight System    3/8"-16 and 1/4"-20 Mounting Threads    Center Tripod Mounting Slots

Related Questions and Answers

Q: 1. Is it safe to change settings on the camera while it is mounted on the Ronin S? What if I have to stop down my aperture? Do I have to stop the gimbal first before touching the camera to change the setting?

A: Yes, you will be able to safely adjust camera settings while your camera is mounted on the Ronin S.

Q: 2. Hi I m not sure whether my ronin is gen1 or gen2. Can I upload my ronin pictures & pls help to identify whether my ronin is gen1 or gen2

A: The 1st Generation Ronin has a square mount, while the 2nd generation has an angled mount. You are more than welcomed to email images to us at askbh@bhphotovideo.com if you feel that would be helpful.

Q: 3. Will this gimbal support the setup of Sony A7III with sony lens 24-105mm F.4? will this come with sony cable? Will the zoom button work with the lens 24-105mm ? Thank you

A: The Sony A7III and the Sony 24-105mm F4 lens are both on the compatibility list with the Ronin-S. You will be able to balance that combination of camera and lens. However this kit does not include any cables. You will need to purchase B&H # DJRONINP13CB which is the DJI Ronin-S Multi-Camera Control Cable (Sony Multi Port). However the 24-105mm is not a servo zoom lens. https://bhpho.to/2DZF5sE

Q: 4. I Have a canon t6i and a kit 18-55 mm lens and a BG-E18 battery grip with 2 batteries, will this setup be on the heavier side and strain the motors?

A: Hi Ryan! Both Matthew and Ben made solid points. I would say the battery grip would be the most troublesome part of your kit because of the added height. I also wanted to mention that if you shoot mostly on the wide end, the Ronin SC might also accommodate your set up, although the Ronin S has more wiggle-room for larger lenses and combinations.

Q: 5. So I want to fly my Sony fs700 on a Dji Ronin. Would this allow me enough wiggle room to operate efficiently or would I need additional parts?

A: You will be good with these two parts. If you were to add equipment to the back of the camera, say a battery, you would also need the CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Short) B&H # CICM502 or possibly the Long version. CineMilled Pan Arm Extension for DJI Ronin Gen. 2 (Long) B&H # CICM503 But if you are using just the FS700 and nothing on the back, the two extensions will be just fine.

Q: 6. Does this work with the Ronin-MX as well?

A: Yes, this will work with the Ronin-M and Ronin-MX.

Q: 7. Does the new firmware upgrade for the DJI Ronin S have active tracking 3.0 like the SC version?

A: Active Track 3.0 is now shown as a features on the DJI website for this gimbal.

Q: 8. I think the attached photos are not for this item.?

A: You are correct and I have alerted our webteam to the error. We thank you and we apologize for any confusion.

Q: 9. How long are these?

A: Dimensions 13.0 x 2.0 x 2.0 / 33.0 x 5.1 x 5.1 cm

Q: 10. Hello, is this fully compatible with a Sony a7s?

A: The Sony A7S will work very well with the Ronin-S. The kit does not include any cables though, you would need to purchase separately B&H # DJRONINP13CB if you wanted to control start/stop recording from the gimbal. https://bhpho.to/2DZF5sE