The Senal SMH-1020CH2 Dual-Sided Communication Headset is ideal for use with wired and wireless communications systems in TV or radio broadcast, communications systems, and sports applications. The headset features a supercardioid, dynamic microphone that's optimized for clear and intelligible voice communication, while rejecting off-axis sound and minimizing handling noise. The microphone is mounted on a durable gooseneck for precise positioning and can be rotated 180°for use on the left or right side.

The SMH-1020CH2 is also designed with a flip-up feature that mutes the microphone when swiveled up to a vertical position. The headphones feature Senal's 40mm neodymium drivers, which deliver a wide frequency response and dynamic range to ensure accurate monitoring. The closed back, over-the-ear design and extra-deep earcups provide sound isolation, even in noisy environments. Thick padding on the headband and earcups offer comfort throughout sessions of extended use. The headphones are also collapsible, making storage and transportation a cinch.

The SMH-1020CH2 feature Senal's twist-locking jack that allows you to easily attach or swap cables and accessories, and expands the compatibility of the headset with Telex and PortaCom wireless systems, broadcast consoles, mixers, computers, and more.

For TV, Radio Broadcasts, and Sports    SMH-1020CH2 Dual-Sided Headset    3.5mm TRS & 3-Pin XLR Y-Cable for Mixer    Two 40mm Neodymium Drivers    Supercardioid Dynamic Microphone    180° Gooseneck with Mute Functionality    Padded Ear Cushions Provide Isolation    Collapsible for Easy Storage    Twisting-Lock Cable Design

The SMH-1020CH2 headset does not include an output cable. Select one of the following Senal cables for your communications system:

• SMH-H5X2: 2.5mm TRRS male to 5-pin XLR male cable for Telex systems
• SMH-H4X2: 2.5mm TRRS male to 4-pin XLR male cable for PortaCom and Clear-Com systems
• SMH-HM3X2: 2.5mm male to 3.5mm TRS male and 3-pin XLR male Y-cable for mixing boards or broadcast consoles
• SMH-HMM2: 2.5mm TRRS male to two 3.5mm TRS male Y-cable for desktop or laptop computer
• SMH-PIGTAIL: 2.5mm TRRS male to unterminated end

The supercardioid dynamic microphone is optimized for clear and intelligible voice reproduction while it rejects unwanted, off-axis noise. You'll be heard loud and clear whether you're speaking to talent or to your director in loud environments like a busy set, sports event, concert, or city street.

Dual-sided headphones with 40mm neodymium drivers offer a wide 20 Hz to 20 kHz frequency response and dynamic range for accurate monitoring and excellent sound.

Closed-back, over-the-ear design and padded ear cushions that conform to your ears provide isolation in noisy environments—critical for listening to directors' cues, instructions, cueing talent, or coaching from the sidelines.

The microphone is mounted on a durable gooseneck that swivels 180°; it can be used on the left or right side.

The twist-locking jack allows for easy attachment of cables and accessories.

Soft, deep, and replaceable ear cushions, as well as a padded headband, provide comfort over extended periods.

This headset is designed to stand up to studio and field use, offering a reliable performance, even in the most demanding environments.

The headset's folding design allows you to store and transport your headphones as needed.

Related Questions and Answers

Q: 1. will it work with takstar sgc-598?

A: That adapter will work for the Takstar SGC-598 microphone, to connect to an XLR input. Since that Takstar mic is battery powered, the less costly ROVXLR adapter would also work: https://bhpho.to/3AOKIE9

Q: 2. Would it work for SmartLav+ to Zoom H6 XLR inputs?

A: Yes it will but you will need to get an adapter for your SmartLav as the connector on the SmartLav is a TRRS. In order for you to use the XLR Power Converter you will need an adapter to change the lav connector from TRRS to TRS. This is the B&H part number for the adapter B&H#ROSC3. Once your TRRS becomes a TRS them you can use the XLR power converter with the H6.

Q: 3. I'd like to connect my on cam cold-shoe shotgun mic (sennheiser, takes AAA) to audio mixer (zoom F4). Is this what I'm looking for?

A: You can use that but it isn't necessary. You can use a simpler adapter like B&H # KOAXMMF or B&H # ROVXLRB&H # ROVXLR

Q: 4. Hi, Does this adapter come with the clip that goes around the middle? I don't see it on the pics...

A: From what I see on Rode's site, this does not come with any belt clip. For an adapter that does, I would recommend the Deity #DEDXLR, which also does the same job.

Q: 5. is this needed for zoom h6 and rode wireless go?

A: No. The adapter you want is the Rode VXLR (B&H # ROVXLR) since you only need to convert the 3.5mm plug to XLR. The VXLR+ is used when you are using a condenser style microphone like a lavalier mic with a 3.5mm connector and need to connect it to an XLR mic input on a recorder or mixer. For instance, if you have a separate lavalier mic that you use with the Wireless GO transmitter, such as the Rode Lavalier GO, it is a condenser mic that requires plug-in power, which is a low voltage. A recorder or mixer's XLR input can supply phantom power, which is typically 48V and way too much power for a lavalier mic. The VXLR+ converts the 48V to a much lower voltage and allows you to use a mic like the Lavalier GO which requires 2.7V and connect it directly to an XLR input on the H6.

Q: 6. Will this work with the Tram TR50?

A: Hello Stan, I show the TR50 as a XLR connection and therefore it would not. If there is a TR50 available with a 3.5mm TRS connector then yes, this will work for you.

Q: 7. I'd like to use the 9V battery powered Rode Videomic (VIDEOMIC-R) to connect with a Zoom PodTrak P4. Will a standard VXLR converter work with that, or do I need this VXLR+ for it? Thanks!

A: With 9V battery installed, the standard VXLR converter will work.

Q: 8. Does this work with the Deity D3 pro microphone ?

A: No. Because the D3 is self powered you can use the regular VXLR https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 9. Will this work with the Deity W lav Pro (that is, instead of the similar Deity adapter)? Thanks!

A: This adapter should work with the mini jack connection provided in the W lav kit.

Q: 10. If I plug a stereo mic to the VXLR+, does it mix both channels into one mono? Or this just uses one of both stereo channels?

A: When using the Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter with a stereo microphone, the output will be summed to dual mono. Please note that most microphones with a 3.5mm TRS connector provide dual mono output signal and not true stereo output. An actual stereo microphone will have two mic elements instead of one.