Power and send video signal to your CCTV system or security camera with this white BNC/M+DC5521/M to BNC/M+DC5521/F Cable from SatMaximum. The 75' long pre-made BNC Siamese coaxial cable is a sturdy and durable all-in-one video and power cable with reliable signal transmission and consistent power delivery. Equipped with male BNC connectors on each end and with female to male 2.1mm power connectors, the cable is designed to simplify setup and is compatible with analog and digital video signals with support for pixel resolutions up to 1080p.

Pre-Made BNC Siamese Coaxial Cable    All-in-One Video & Power Cable    Female to Male 2.1mm Power Connectors    Compatible with Analog & Digital Video    Supports up to 1080p Resolution

• Pre-made BNC cables with Siamese power coax cables
• Plug-and-play security camera and CCTV cabling solution for home and business surveillance use
• Male to male BNC connectors
• Female to male 2.1mm barrel power connectors
• All-in-one video and power cable
• Compatible with analog and HD-SDI, CVI, TVI, AHD (CIF, HD1, D1, 960H, 720p, 960p, and 1080p)

Related Questions and Answers

Q: 1. So this only works on a Thunderbolt 3, 4 or higher connection? Not a USB-C 3.2 Gen 2 or Gen 2x2 port?

A: The Sabrent Thunderbolt 3 to M.2 NVMe SSD Tool-Free Enclosure will not work with USB 3.2 or USB 3 Gen 2x2 ports. When USB4 becomes more widely available, there will be some support for Thunderbolt 3 hardware.

Q: 2. Can this be connected to 2 devices at once? A PC and a Mac?

A: The OWC Express 4M2 4-Slot M.2 NVMe SSD Enclosure can only be connected to one computer at a time. There are two Thunderbolt 3 ports so you can daisy-chain. Daisy-Chaining allows you to connect up to six Thunderbolt devices to your computer.

Q: 3. Is it compatible with Crucial 2TB P3 NVMe PCIe 3.0 M.2 Internal SSD?

A: Yes, this OWC Express 4M2 4-Slot M.2 NVMe SSD Enclosure is compatible with the Crucial 2TB P3 NVMe PCIe 3.0 M.2 Internal SSD.

Q: 4. Does the 4TB card come with NVME SSD's? If so, which brand?

A: The OWC 4TB Accelsior 4M2 PCIe M.2 NVMe SSD comes with Toshiba Synchronous Triple-Level Cell (TLC) 3D NAND Flash drives.

Q: 5. Will this fit in the Peak Design Tech Pouch's (BH #PEBTPCH2) center side pocket (where Peak Design shows a SanDisk SSD)?

A: The OWC Envoy Express Thunderbolt 3 M.2 NVME SSD Enclosure BH #OWTB3ENVXP00 will fit in a Peak designs 2L pouch.

Q: 6. the slot available on the my motherboard is a PCI Express x16 slot, running at x4 (PCIEX4). Will this work and does the x4 speed significantly decrease the utility?

A: You need x8 or x16 PCIe 3.0 or 2.0 slot

Q: 7. Is the "XPG 2TB SX8200 Pro NVMe M.2 Internal SSD" SSD a good option to be used with this enclosure?

A: Yes, it is a great option to use with this enclosure.

Q: 8. will this work in a Sonnet Echo Express III-D Thunderbolt 3 Expansion Chassis for PCIe Cards? If so, what would the performance be (as opposed to installing directly into a slot on the motherboard)?

A: Likely around a 15% decrease in performance.

Q: 9. Do the drives need heat sinks?

A: The OWC Express 4M2 4-Slot M.2 NVMe SSD Enclosure BH #OWTB3EX4M2SL does not need heatsinks for the SSD.

Q: 10. What raid configuration does it come with by default? Is the listed space the usable space or the space before you set up the raid?

A: The OWC 8TB Accelsior 4M2 comes unformatted and must be initialized using the SoftRaid software.