This 82mm HD EVO-Series Balancer GND16 Filter Set from H&Y Filters includes a 4-stop filter and an 82mm threaded magnetic adapter ring. As part of the EVO series, the filter has a dual-mount design. It has 82mm threading on the rear and front and can be screwed onto your lens or attach it magnetically using the included magnetic adapter ring. The filter is made with multicoated HD optical glass and features an aluminum filter ring.

1.2 Optical Density    Aluminum Filter Ring    Multicoated Optical Glass    Front and Rear Threading    Magnetic Adapter Ring and Lens Cap    Screw-In & Magnetic Attachment

Related Questions and Answers

Q: 1. What is the difference between a tuned for prominences and a chromosphere filter? Is there one of them that does both better? How do I choose?

A: No, two different condition. The chromosphere is the sun's surface. The prominence is viewing sun flairs around the perimeter of the sun. .

Q: 2. Can anyone confirm with the negative review that the gels don't fit the aluminum light?

A: This Filter set is specific to the LED160. If you have the 5600k Daylight Version of the light, this will work with it.

Q: 3. Is it use for LED160 Plastic body version?

A: You can use it but it's not a perfect fit. You can either trim the filter with a knife to fit the plastic version LED or simply apply it to the LED with paper tape.

Q: 4. Will this work on a Pro Media Gear 344L tripod ? J. Payne

A: No, because the tripod legs are flat-based and this is an adapter to change a flat-based tripod head into a ball head.

Q: 5. Is this compatible with the Sirui VH-10X mini fluid head?

A: Yes, the Sirui VH-10X Fluid Video Head can attach to the Sirui 75mm Leveling Ball.

Q: 6. Is the filter threaded for a lens hood

A: Yes. this filter has 58mm threads on the front to screw on other hoods or filters to.

Q: 7. Will this work on the Sennheiser HD 280 Pro?

A: No. The Sennheiser Padding Set for HD 300 & HMD 300 Pro Headphones is not compatible for use on the Sennheiser HD 280 Pro Headphones.

Q: 8. is that work for Yuneec H520E batteries ?

A: Yes, the YUNEEC DY5 Dual-Port Rapid Charger/Balancer for H520 LiPo Batteries is compatible with batteries for the YUNEEC H520E.

Q: 9. doest this filter fits for sigma 85mm f1.4 Art lens ?

A: did you get it? and did it work?

Q: 10. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.