This 95mm HD EVO-Series Balancer GND16 Filter Set from H&Y Filters includes a 4-stop filter and a 95mm threaded magnetic adapter ring. As part of the EVO series, the filter has a dual-mount design. It has 95mm threading on the rear and front and can be screwed onto your lens or attach it magnetically using the included magnetic adapter ring. The filter is made with multicoated HD optical glass and features an aluminum filter ring.

1.2 Optical Density    Aluminum Filter Ring    Multicoated Optical Glass    Front and Rear Threading    Magnetic Adapter Ring and Lens Cap    Screw-In & Magnetic Attachment

Related Questions and Answers

Q: 1. Does this unit require external power? if so, how much and on what kind of connector?

A: The Whirlwind Line Balancer/Splitter requires no external power and is designed to split a single line level input signal into two balanced line level outputs. A choice of two output configurations is provided: one direct output and one isolated output, or two isolated outputs. The Line Balancer/ Splitter uses Whirlwinds TRSP-600L transformer and has a frequency response of 20 to 20kHz, 1dB @ +2OdBm.On the Line Balancer/Splitter are two male XLR jacks, one female XLR jack, a 14 jack and three switches as outlined below:INPUTEither of the two input connectors, a female XLR jack or a 14 TRS jack (Tip = Pin 2 and Ring = Pin 3) can be used for connection from a line level source, balanced or unbalanced. Use only one input at a time.OUTPUTSThe male XLR output connectors can be configured in one of two ways. The ISOLATED OUT/SPLIT 1 is always transformer isolated and the DIRECT OUT/SPLIT 2 is either directly connected to the input or transformer isolated, depending on the position of the OUTPUT SELECT switch.OUTPUT SELECTThis push-button switch selects the output mode of the unit. In the out position, the DIRECT OUT/SPLIT 2 provides a direct output signal and the ISOLATED OUT/SPLIT 1 provides a balanced 600 isolated signal. In the in position (the center of the switch changes to orange) both output connectors provide a balanced 150 ?isolated signal that is attenuated by 6dB from the input.GND/LIFTSEach of these switches disconnects the ground between the inputs and the XLR outputs when set to the LIFT position. Grounds remain connected when set to the GND position.This product is warranted to be free of defects in materials or workmanship to the original purchaser for a period of 3 years from the date of purchase.

Q: 2. Will this work on a Pro Media Gear 344L tripod ? J. Payne

A: No, because the tripod legs are flat-based and this is an adapter to change a flat-based tripod head into a ball head.

Q: 3. What size screw holds the ball to the head, 3/8" or 1/4"? I need a ball w/a 1/4" screw.

A: The Sirui 75mm Leveling Ball Set for R-X Series Tripods has a 3/8"-16-size screw to mount to tripod heads.

Q: 4. Do these filters fit the Dracast Camlux Pro Bi-Color On-Camera Light Kit?

A: No, these filters are meant for the Dracast LED160 light, which is smaller than the Dracast Pro Bi-Color On-Camera Light. The filter will not cover the entire light.

Q: 5. Does this tiedown work with BCH-30?

A: No. The BCH-30 is a 100mm bowl unit.

Q: 6. Will this work on the Sennheiser HD 280 Pro?

A: No. The Sennheiser Padding Set for HD 300 & HMD 300 Pro Headphones is not compatible for use on the Sennheiser HD 280 Pro Headphones.

Q: 7. Will this work with the yuneec typhoon H batteries as well?

A: The YUNEEC DY5 Dual-Port Rapid Charger/Balancer for H520 LiPo Batteries will not work for the Typhoon H batteries.

Q: 8. Is this compatible with the smallrig Matte box mini pro?

A: Yes, the SmallRig Clamp-On Matte Box Adapter Ring Set (80/85-95mm) is compatible with the following Smallrig Matte-box models. The Mini Matte box pro is model 3680. Works with: Star-Trail and mini series matte box（3196,3575,3680）

Q: 9. Is it use for LED160 Plastic body version?

A: You can use it but it's not a perfect fit. You can either trim the filter with a knife to fit the plastic version LED or simply apply it to the LED with paper tape.

Q: 10. Can I use this device as a splitter to make a backup recording on a Zoom H6 for example?I mean, I have a shotgun mic. I split the signal in two, put it in two inputs of the recorder... I don't want to use a Y because I could lose a lot of gain on the two outputs. Or do you have other devices that can do this? Or a good mixer (I mean affordable 300-500) to to team with the H6 that can do this? I plan to use it with a Shotgun AND a Lavalier. So 2x2 outputs. Thanks! ;)

A: This device is designed for line level signals only. Splitting a microphone signal is never a good practice as there will be signal loss and added noise. A mixer, not a splitter is the way to go. The Mackie Mix8 (B&H # MAMIX8) is an 8-channel compact mixer that features high quality components, a rugged metal chassis, and is designed for a variety of sound reinforcement applications. The mixer features two mic/line inputs with 48V phantom power, two stereo 1/4 line inputs, and stereo 1/4 aux send and return. It is capable of accommodating dynamic and condenser microphones, keyboards, DJ setups, portable music players, and more.Each of the two mic/line inputs is equipped with XLR and 1/4 connectors, a dedicated 3-band EQ, aux send, pan, level control and an LED overload indicator. The two stereo 1/4 line inputs each feature an aux send, 3-band EQ, level control, balance control and also have an LED overload indicator. a href= http://bhpho.to/1sLQeDj target= _blank http://bhpho.to/1sLQeDj/a