Presented as the first entry in their Value Line of 500-series compatible products, the Artistic MicPre SE from Fredenstein is a versatile yet affordable mic preamp with a fully discrete gain stage and DI input, delivering top-of-the-line performance. With a wide gain control range of 20 to 65 dB, a -20 dB attenuation pad, and a 120 Hz high-pass filter, you have everything you need to capture the hottest signals and get clean, punchy recordings every time.

The onboard high-impedance 1/4" instrument DI jack makes it easier to track keyboards, synths, drum machines, and even guitar pickups for DAW processing or reamping applications. Further utilities that enhance the versatility of the MicPre SE include a switchable 48V phantom power function and a polarity inversion feature. The eight-LED peak meter gives you a wide 50 dB range for precise reading of your input signals, ensuring you never record clipped takes.

Fully Discrete Gain Stage and DI Input    Gain Control from 20 to 65 dB    -20 dB Pad for Hot Signals    High-Impedance 1/4" Instrument Input    Switchable 48V Phantom Power    120 Hz High-Pass Filter    POL Switch Inverts Input Phase    8 LED Meter with 50 dB Range

Related Questions and Answers

Q: 1. Needing a amplified microphone to do voiceover on live dvd recording?

A: You don't need it, but a pre amp is a good idea!

Q: 2. Does this canvas require a varnish coat?

A: No, it does not require a varnish coat. I have printed many photos all without varnish and they look as good as the day they were printed a few years later. That said, you could varnish them (some yellow over time ...) to help protect against scuffs ...

Q: 3. I can't find the canvas papers in specs for a Canon TA-30. Can I use this with my printer?

A: Although the Canon TA-30 printer can accomodate media upto 31.5 mil thick, the Canon TA-30 only uses 5 dye inks and would NOT be considered adequate for photographic or art reproduction.

Q: 4. I know there doesn't seem to be any way to turn off the phantom pass through. Can you use this on dynamic mics like the Shure SM7b without any problem? Thanks.

A: The FetHead Phantom is only designed for condenser mics. The standard FetHead is designed specifically for dynamics such as the SM7B and ribbon mics as well.

Q: 5. Is it good for acoustic wall panel cover? Is it too dense that may bounce sound back to the room?

A: All the inkjet canvases have a coating on them in order to absorb the ink properly. I believe this may be a factor to unbalance the acoustic panels. aside for that the canvas fabric itself can unbalance the accoustics.

Q: 6. How well does it stretch over stretcher bars?

A: Canon 1429V467 Artistic Satin Canvas (350 gsm) 24" x 40' Roll (B&H# CAASC2440) can be used with wrap bars and it will hold up well. It can also be sewn to other items, need be.

Q: 7. What does this run on? Does it require batteries? Since it supplies you with Phantom Power, do you need to put in any batteries or where does it get the power from? How long will this last or its 24/7?

A: It passes through phantom power from the host device. it does not provide phantom power by itself. There is no power supply. This is an an in-line device.

Q: 8. Will these work with Canon EL-1 speedlite??

A: To use MagMod Pro Artistic Gels on the Canon Speedlite EL-1 you do need the MagMod MagGrip 2. Here is the link: https://bhpho.to/3OUJe2s

Q: 9. will the magnetic gels work with the original maggrip on the AD200?

A: Yes, the MagMod Pro Artistic Gels may be used with both the original MagMod MagGrip and the MagMod MagGrip 2 for use on the Godox AD200 TTL Pocket Flash. According to the manufacturer, MagMod 2 products are compatible with the previous (original) MagMod system; however, you will have the best possible experience when using each modifier alongside other modifiers of the same version.

Q: 10. Will this work with Nikon 8x30 EII?

A: The Nikon 8x30 EII Binocular is no longer available.