The FleXLR-45 Gender Adapter from Pliant Technologies is a compact 4-pin XLR female to 5-pin XLR female adapter for use with 4-pin XLR male headsets. It's compatible with all Pliant CrewCom radio packs and CUs.

For Use with 5-Pin XLR Male Headsets    Compatible with CrewCom Radio Packs/CUs

Related Questions and Answers

Q: 1. Does this work for connecting iphone to a mixer and using to place a phone call?

A: Yes, the Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone can be used to input audio into an iPhone from an audio mixer during a phone call.

Q: 2. Is this adapter threaded on the female end?

A: The female end is an non-threaded 5/8" female receiver.

Q: 3. What is the weight load capacity of the item?

A: The Avenger F831 Baby Female Swivel with Ball is not rated. In most cases the strength of the boom and stand will be what determine the load rating.

Q: 4. I am a bit confused with previous answer, Manfrotto 208HEX can be inserted on both end, right? its HEX shape, wanted to re-assure

A: No. The following unit will not adapt to a hex spigot.

Q: 5. Will this work with a Sennheiser MKE 440 stereo microphone? If not, do you sell one that will?

A: No, the Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone (3") BH #SASRC2002 is not compatible with the Sennheiser MKE 440. You can make it work in stereo by using the Saramonic LC-C35 Locking 3.5mm Connector to Apple-Certified Lightning Output Cable BH #SALCC35 along with the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter BH #HOASMFSMF.

Q: 6. Will it work with a gopro hero 8?

A: Hi, no. You would need the GoPro Pro 3.5mm Mic Adapter BH #GO35MA - https://www.bhphotovideo.com/c/product/1274435-REG/gopro_aamic_001_3_5mm_mic_adapter.html.

Q: 7. Will this work correctly with the Tentacle Sync 3.5mm Mini-Jack Microphone Y-Cable (12"), which will send audio timecode signal into the iPhone's left stereo channel and audio from my mic into the right stereo channel? Thanks.

A: In theory, yes, the Movo Photo IMA-2 Female 3.5mm TRS to Lightning Microphone Adapter Cable (5.5") should work as theorized along with the Tentacle Sync 3.5mm Mini-Jack Microphone Y-Cable (12").

Q: 8. Will this let me connect a Rode Wireless Go receiver to the Rodecaster Pro?

A: No. You should use this one: Rode VXLR - Mono Mini-Jack to XLR Converter BH #ROVXLR: https://bhpho.to/398Q5Rk

Q: 9. If perhaps I want to go on musical Facebook live, can I use this chord and pick all my audio from the mixer directly and the output on Facebook page will be as neat and the output from the speakers?

A: No. The Saramonic SR-C2002 3.5mm TRRS Female to Lightning Adapter Cable for Audio to/from iPhone is intended for use with a microphone or a mic level signal. The output signal from a mixer is line level which is much louder than mic level, so you will need to use an attenuator or level matching cable between the mixer and Saramonic Lightning adapter in order to pad the line level signal from the mixer and bring it down to mic level if you want to connect it to an iPhone. If your mixer has XLR outputs, you can use a cable like the Sescom Dual Female XLR to 3.5mm TRRS Plug - Line to Mic Level Summing Cable for Mobile Devices - 12" (B&H # SEIPSUMXLR12). If your mixer has RCA outputs, you can use the Sescom Stereo RCA to 3.5mm TRRS Plug Line to Mic Level Summing Cable for Mobile Devices - 12" (B&H # SEIPSUMRCA12). If your mixer has 1/4" output, you can use the Sescom Dual 1/4" Phone Plug to 3.5mm TRRS Plug Line to Microphone Summing Cable - 3' (B&H # SEIPSUMTS3). Please feel free to contact us by phone or through live chat if you have additional questions or if you would like further assistance.

Q: 10. is that screw 5/8?

A: No, the thread is an M10