The 82mm Nano-X Series 2-in-1 Variable ND & CPL Filter from K&F Concept rotates to reduce light by 2, 3, 4, 5, or 6 stops while also applying circular polarization. The filter is made with 28-layer multicoated optical glass. The filter frame features two orange levers and self-locking technology. The surface of the frame offers a trapezoidal pattern for improved handling and is treated with oxidation sandblasting to minimize the entry of stray light.

Variable 0.6 to 1.8 Optical Density    28-Layer Multicoated Optical Glass    Orange Levers & Self-Locking Technology    Trapezoidal Frame Surface Pattern    Oxidation Sandblasting Treatment

Related Questions and Answers

Q: 1. Hi! Does it works on a sony fx6 or fx3? Thanks

A: Yes, The Tilta Nucleus-Nano Run/Stop Cable for Sony a6, a7, and a9 Series Cameras will also support the Sony FX3. And the Sony FX6 would work with the following cable. https://bhpho.to/34FF1xt

Q: 2. Is anyone using this lens on a Nikon D800? If so, how easy or hard are you finding it to nail focus where the subject is not perfectly still?

A: It takes some practice. I did a shoot recently with the milvus and I missed a lot of shots. I made it a point to keep the lens on my camera most of the time. I find using the guage in the view finder helps a lot.

Q: 3. how do i config my sony a7s2 to make de run/stop works?

A: This cable is designed to be used with the nucleus nano focus motor. Tilta Nucleus-Nano Wireless Focus Control System BH #TIWLCT04 • MFR #WLC-T04. https://bhpho.to/3gSSuFh If you would like a side handle control system with cage for the camera to add, the Tiltaing Sony a7/a9 Series Kit C (Black) BH #TIAT17CB • MFR #TA-T17-C-B can be looked into with the nucleus nano motor. https://bhpho.to/3kL5gXP

Q: 4. Will this work with the Nucleus-M version?

A: The R/S port on the Nucleus-M motors is a 7-pin Lemo while on the Nucleus Nano, the R/S port is a micro DC. This means that the R/S cables that we manufacture for the Nano are not compatible with the Nucleus-M system.

Q: 5. Hello, Can I use the aperture ring on this lens with the Nikon D850?

A: Nikon states on page 20 when using a CPU lens equipped with an aperture ring, lock the aperture at the minimum setting (highest F-number). The ZEISS Milvus 15mm f/2.8 ZF.2 Lens for Nikon F, B&H # ZE1528MZF2, is a CPU lens and is designed to adjust the camera's aperture by rotating the command dial on the camera body. If you wish to use the aperture ring, you would have to register the lens with your camera as a Non-CPU lens as indicated on page 218-219 in the Nikon D850 DSLR Camera's instruction manual. As indicated, go to [Setup Menu] [Non-CPU Lens Data], then select a lens number, enter the lens' focal length and set the minimum aperture, the press [OK] to save the settings to see if that will allow you to use the aperture ring.

Q: 6. Will this work with the Sony a5100?

A: Tilta only lists compatible with a6, 7 and 9 camera, We can't guarantee it would.

Q: 7. Does this lens have internal focusing? I would be using it with a matte box and would like to keep the option of filters open.

A: The ZEISS Milvus 1.4/25 features internal focusing and there is no front telescoping of the barrel while focusing.

Q: 8. Will this work with the A7R IV?

A: Unfortunately this will not work for the a7R IV camera. It only works with the a6, a7, and a9, series.

Q: 9. Is there an option that works with A7S III?? Cheers

A: Yes, this should work with the Sony A7SIII as well.

Q: 10. is this lens has internal focus system compatible for matte box?

A: This is correct, there is no external movement of the lens barrel when focusing the Milvus 2.8/18 lens.