Enjoy your music with power and clarity with the black FiiO FT3, a pair of large, open-back headphones that deliver remarkable, larger-than-life sound. The FT3 features a 60mm dynamic driver with a beryllium-plated gasket and a diamond-like carbon (DLC) diaphragm that mitigates nonlinear distortion while extending the frequency response (7 Hz to 40 kHz).

The enclosure is made from durable and lightweight aluminum alloy and houses the drivers at an angle parallel to the ear for better sonic delivery. The open-back design reduces unwanted vibration and resonances, resulting in a massive soundstage. The 350-ohm impedance requires a proper headphone amplifier to deliver stunning clarity and an imperceptible signal-to-noise ratio. The FT3 features a 9.9' high-purity Furukawa monocrystalline copper wire headphone cable, two pairs of ear pads (protein leather and suede), two sets of plugs (3.5mm and 4.4mm), two adapters (3.5mm to 1/4" and 4.4mm to XLR-4), and a luxurious leather case.

60mm Large Dynamic Driver    Asymmetrical Magnetic Circuit System    350-Ohm High-Impedance Design    Beryllium-Plated Gasket + DLC Diaphragm    3-Axis Swiveling Design    Angled Drivers for Improved Sound    7 Hz to 40 kHz Frequency Response    Monocrystalline Copper Wire Cable    Includes Two Sets of Earpads    Includes Adapters, Plugs, and Case

The FT3's large 60mm dynamic driver is capable of generating higher output power, leading to less distortion under large dynamic signals. Also, the larger driver is more easily able to produce lower frequencies for deeper reaching bass.

The FT3 driver gasket is plated with beryllium, resulting in a lighter and more rigid gasket to better handle the movement of the large dynamic driver for less distortion. The diaphragm of the FT3 is made of Diamond-Like Carbon (DLC), which is both highly sturdy and lightweight compared to other diaphragm materials, allowing for the FT3 driver to be less prone to breakup and nonlinear distortion. It also has an extended frequency response and improved soundstage.

The FT3 was designed with a 350-ohm impedance to achieve great sound. Higher impedance headphones are more effective at filtering out noise, resulting in a purer sound with better signal-to-noise ratio performance. The voice coil is made of ultra-fine Japanese copper-clad aluminum only 0.035mm thick in diameter and allows the driver to better and more quickly follow signals. It has anti-interference capabilities while providing thunderous dynamics across a wide frequency range.

The FT3 utilizes powerful N52 neodymium magnets to maximize sound quality under its 350-ohm impedance design. These magnets have been arranged in an optimized asymmetrical internal and external magnetic circuit system. When the voice coil starts to move during the reproduction of sound, the optimized magnetic circuit balances this movement of the voice coil and diaphragm, especially during large dynamic changes, allowing for a more effective use of magnetic energy and better control over the voice coil.

The 23AWG headphone cable is 9.9' long and features Furukawa monocrystalline copper wire.

The exterior of the FT3 is made entirely of aluminum alloy that not only feels luxurious to the touch but is also highly rigid and lightweight. This gives the FT3 the perfect combination of being comfortable to listen to and being durable enough to withstand life's challenges.

The FT3's design begins with hexagonal elements as its base, and when combined with how open-backed headphones usually look, gives off a bold sci-fi appearance. The open-back design features a hollowed-out mesh to not only reduce the weight for greater listening comfort, but also to fully unleash the capabilities of its driver in a more open environment.

The FT3 features an open-back design that reduces unwanted vibrations and resonances. The driver pushes air out the open-back housing resulting in high-resolution details for a clear and naturally wide and open soundstage.

The 3-axis swiveling design was specifically made so that the FT3 could better fit a wide variety of heads and face shapes for improved comfort and a better seal to maximize sound quality.

The FT3's driver is placed at a parallel angle, which helps to reduce high-frequency loss caused by the waves hitting the contour of the ear and not entering it. Angled drivers can also minimize unwanted reflections caused by the shell of the headphone that cause standing waves as well as reducing distortion. Additionally, the rear of the FT3's shell has a reflective tip that is specifically designed to direct sound waves produced by the driver. It prevents unwanted reflections from interfering with the audio signal, which minimizes sound flaws and reduces artifacts.

The FT3 comes with 2 sets of earpads, each with their own sound

• Suede earpads: balanced sound, enhanced ambience, majestic experience
• Protein leather earpads: clear sound, large soundstage, highly detailed

The FT3 cable features swappable plugs

• 3.5mm plug
• 4.4mm plug
• 3.5mm to 1/4" adapter
• 4.4mm to XLR-4 balanced adapter

Protect your headphones with the light and luxurious leather storage bag.

Related Questions and Answers

Q: 1. Are the earpads a standard size. How do you know if the replacement earpads are compatible? The descriptions are vague.

A: We have tested to check if our featured accessory ear-pads are compatible.

Q: 2. Could I sufficiently power these with a FiiO A5?

A: Absolutely! Output Power: 800 mW (32 Ohms / THD 1%) ≥150 mW (300 Ohms / THD 1%)

Q: 3. Are the ear pads tough enough for daily use by elementary students? Are they covered by the warranty?

A: I like them and did not inquire of the warranty. But the cord is very long. I would be concerned with children using them.

Q: 4. Is there a connector that allows you to use these with a new iphone?

A: They do not include a Lightning to 3.5mm adapter. You would need the original one that came with your iPhone or get a new one from Apple.

Q: 5. Does these headphones need a break in period , if so for how many hours does it need and how loud should you play them for the break in period to finish ?

A: Here is the information that the manufacturer provides in the user manual for the Focal Clear MG headphones regarding an initial break-in period: • These headphones require a running-in period in order to operate at their best. • They will run themselves in naturally after several hours of listening time. • If you want to speed up the process, we recommend playing very bassy music through them for at least 24 hours at a relatively high volume. • This will stabilize the speaker drivers and allow you to get the very best out of your headphones.

Q: 6. Are they battery amplified?

A: It is not battery amplified.

Q: 7. Can you hear a lot of noise coming out of these headphones when someone is listening to music?

A: YES ! Take that into consideration, because you will get looks from people standing with 20 feet of you.

Q: 8. will it work with electric piano?

A: It works just fine with my yamaha-143

Q: 9. Which of these fit the Bose QC35 ear cushions - 2.5 inch or 4.5 inch?

A: You would need the 4.5" size of the Auray Disposable Over-Ear Headphone Covers.

Q: 10. Does it comes with 1/8th adapter?

A: The plug is 1/8 also included is a 1/4 adapter.