Power your DIY modular case with the Tiptop Audio Zeus Passive Busboard, a Eurorack power distribution board with 14 standard 16-pin Eurorack connectors and five Analog Systems connectors. The Zeus passive busboard is designed to distribute power to modules coming from either the first generation of Zeus Powered BusBoard, or any other power supply available from other manufactures like linear power supplies.

The Passive Busboard contains both standard quick fit terminals and a screw terminal block for connecting to power. The quick-fit connectors are mounted on the bottom side of the busboard to provide clean wiring, while screw terminal blocks are available simultaneously upfront, for simple and easy connection to power if needed.

Although called Passive, the Zeus Passive Busboard can produce up to a 220ma +5V supply using its own built-in regulator, giving you the confidence that a 5V supply will be there for you in case one of your new modules requires it.

For 1st Gen Zeus Powered Busboard    Works with Most 3rd Party Power Supplies    14 x 16-Pin + Five AS Connectors    Great for DIY Setups    Extend by Adding More Studio Busboards

Related Questions and Answers

Q: 1. Does this come with a stereo mini cable?

A: The Saramonic SR-AX101 does include a stereo mini cable.

Q: 2. Can I use it to connect a mixer board to my dslr?

A: No. You would require something with line inputs instead of mic inputs like the Kopul CMX-2-V2. https://www.bhphotovideo.com/c/product/1332706-REG/kopul_cmx_2_v2_two_channel_passive_camcorder.html

Q: 3. Purpose to record sound comes out from mixer and goes into DSLR or mobile phone with best balanced audio.Is Saramonic AX1 ok?

A: The Saramonic AX1 Passive 2-Channel Audio Mixer has independent volume controls for the left and right channels that allow you to achieve the proper balance for your recording with either mono or stereo output. The mixer can be used for cameras, smartphones, tablets, computers, or just about any audio application where you need to record the two input signals to one input and either separate the two channels for a stereo signal or mix them together for a dual mono signal.

Q: 4. The Kopul version of this had a cold shoe mount that was terrible adn would disassemble in the field when the screw fell out of the bottom from too much stress of mounting receivers on it. Does this product suffer the same problem?

A: I worked with Saramonic for 2-years and that whole time, I have not seen any defects of this product, or heard of an issue like you describe. I also have 2 in my possession for those 2-years and had no issue. My best suggestion is to try the item for yourself and if it's not up to your standards, return it for a refund or another product. We also offer a one-year warranty for full replacement if there's any problem. I think you're going to be happy with the product.

Q: 5. Are these the 3/4 wide webbing?

A: The webbing used on the Adjustable is indeed 3/4 wide. The actual connector to the camera is 3/8.

Q: 6. I want to be able to conduct a traditional two person interview, but have the audio recorded on separate tracks/ channels. With that being said. would this work well with the Saramonic Blink 500 B2 2-Person Digital Camera-Mount Wireless Omni Lavalier Microphone System?

A: Since the Blink 500 B2 sums the 2 mics into a dual mono mix, adding a SR-AX100 will not split it for you. You could purchase 2x Blink 500 B1 systems and the SR-AX100 and get each person on seperate tracks. You could even do that with a simple wire adapter instead of the SR-AX100, but the SR-AX100 will give you individual level control. If you already own the Blink 500 B2, you can add a Blink 500 RX to the system and get the same result. I hope that helps and isn't too confusing.

Q: 7. What is the overall length when the two parts are clipped together?

A: 7 inches.

Q: 8. Is the EVO 16 have a built in Reverb and Delay with a software configuration as for stand alone ?

A: No, the Audient EVO 16 24x24 USB Audio Interface does not have built-in effects like reverb or delay.

Q: 9. How wide are the snap connectors?

A: The overall size is 1 . The interior of the clip is 7/8

Q: 10. I'm looking for Op Tech connectors for my Nikon D4s, which connectors are stong enough to hold a D4s with a 24-70 2.8 lens?

A: Yes, the straps are strong enough for the 24-70 lens and more. I use them as safety straps on my 400 and 600 4.0.