You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Octamas Gear Power Box Pro V-mount To V-mount Adapter

Octamas Gear Power Box Pro V-mount To V-mount Adapter
  • Product Code: ga145006
  • Availability: In Stock

$3,060.00 $4,773.60

Adapt your cinema camera or light for use with full-sized V-mount batteries using this Power Box Pro V-Mount to V-Mount Adapter from OCTAMAS gear. Constructed from lightweight yet durable aluminum, this versatile power adapter features numerous power options for powering your V-mount camera or production gear using a professional V-mount battery while providing redundant, hot-swap power and accessory power distribution options. Multiple threads on the top and bottom of the mount provide mounting options to integrate into the OCTAMAS gear SWISS cage system.

The plate features a 12V 4-pin XLR input to provide redundant power from an external source for hot-swapping with uninterrupted power, and its built-in chip prevents the battery from being discharged when installed. Output options include two 24V 3-pin Fischer run/stop trigger ports, a 3.5mm LANC run/stop trigger port, three D-Tap outputs, and two 2-pin LEMO-type outputs for powering accessories.

Power Distribution Box for SWISS Cage    Use V-Mount Battery on V-Mount Camera    Top & Bottom Mounting Threads    4-Pin XLR Input for Hot Swap/Redundancy    2 x Fischer R/S Ports, 3 x D-Tap Outputs    2 x 2-Pin LEMO-Type Outputs    1 x 3.5mm Run/Stop Trigger Port    Camera Stays Running If Voltage Exceeded    Durable Aluminum Construction

Key Specs
Power OutputFischer 3-Pin: 24 VDC at 3 A
LEMO 2-Pin: VDC
D-Tap: VDC
V-Mount: VDC
Camera Power MethodBattery Plate Mount Type
Plate Front / Battery MountV-Mount
Hot-Swap SupportYes
Power
Power InputV-Mount: VDC
XLR 4-Pin: 12 VDC
Power OutputFischer 3-Pin: 24 VDC at 3 A
LEMO 2-Pin: VDC
D-Tap: VDC
V-Mount: VDC
General
Camera Power MethodBattery Plate Mount Type
Inputs/Outputs1x XLR 4-Pin Male
2x Fischer 3-Pin
2x LEMO 2-Pin Female
3x D-Tap
1x 3.5 mm TRS
Plate Front / Battery MountV-Mount
Plate Rear MountV-Mount Battery Plate
Number of Battery Bays1
Hot-Swap SupportYes
Material of ConstructionAluminum
Dimensions4.8 x 3.5 x 2.6" / 123 x 90 x 66 mm
Weight17.5 oz / 497 g
Packaging Info
Package Weight1.3 lb
Box Dimensions (LxWxH)6.55 x 5.6 x 2.55"

Related Questions and Answers

Q: 1. will this accommodate a 3/4" wide case?

A: Tablet mounts adapter are not recommend to be used with cases, but this mount does support tablets with a 3 to 9" wide dimension. If a tablet with a case still fits these dimensions, it should be compatible.

Q: 2. Are pinout diagrams for the Lemo connectors available?

A: It may be possible to obtain such a diagram from the manufacture, please email us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a so we can further assist you with this question.

Q: 3. Are there any products similar to this that will hold an iPhone in landscape mode as well as an iPad in portrait? I believe the range necessary for this would be at least 2.25 -9.5 and this product seems to *just* fall short.

A: I'm sorry. We don't carry a single device for such a large size range.

Q: 4. What is the difference between the “C Indicator” vs the “CC Indicator?”

A: Hello Jeremiah, Thank you for your question, the C indicator lights up when the battery is charging, and the CC indicator lights up when the charging is complete. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 5. I'm looking for a 1 inch wide smart phone to use with this mount. Any suggestions?

A: Why i wide? that's an incredibly thick mobile? This holder will work with anything up to 1 cm wide but that's really it.

Q: 6. Does this work with Sony A1?

A: Yes, The SHAPE J-Box Camera Power & Charger for Sony a7 Series comes with a SONY style FZ-100 dummy battery that will support the Sony A1.

Q: 7. Do i understand correctly that the AC power could be used to power the whole rig (monitors, focus motors etc) from wall socket?

A: When using the SHAPE J-Box Camera Power & Charger for Sony PXW-FX9, a battery must be connected when using the AC cable.

Q: 8. Does this work for Gold mount plus batteries? Like the Anton Bauer 26V batteries?

A: No, unit will only provide 12-16 Volts

Q: 9. Does this have any ptaps on the other side?

A: This has two p-tap connections.

Q: 10. I see in the photo of your product that they put a battery that is small in height. Any size of battery V-mount fits in the D-box to give power to the Sony camera and a follow focus by d-tap? For example, will it support the battery that is higher in size GEN ENERGY G-B200 195Wh?

A: Hello BamkThank you for your question! The small battery you see in the picture is actually a dummy battery cable designed to power the Sony A7 series camera. The package comes with the appropriate cables to plug it in our D-box system. You can certainly add a regular size V-mount battery at the back of the D-box, or even a higher size one like the one you're suggesting. The D-box has one D-tap output, if your battery has an additional D-tap output, you'll be able to power a follow focus also. We hope this helps and we thank you for your interest in our products. The SHAPE team

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Ifootage Beava Roller 35

$957.00 $1,272.81

Lg 16" Ultrabook Laptop (charcoal Gray)

$2,277.00 $2,777.94

Kopul High-performance Passive Direct Box

$74.97 $101.96

Products You May Like

Cavision 82mm Circular Polarizer Filter

$180.00 $219.60

Ice Uv Filter (52mm)

$26.91 $35.25

Aquatech P-160 Lens Port

$747.00 $1,075.68

Aleon Hard Aluminum Backpack (16", Platinum)

$987.00 $1,500.24

Jupio Tri-charge For Canon Lp-e6

$389.85 $495.11

Dremel 3d 3d40 Flex Build Plate

$83.97 $125.12