Sachtler 75/2 Mark Ii Aluminum Tripod System With Ace Xl Head & Mid-level Spreader
- Product Code: ga145644
-
The Sachtler Ace XL Mark II Fluid Head is designed to facilitate smooth pan and tilt movements with your cine-style camera configurations thanks to its 17.6 lb load capacity. The fluid head can be secured to 75mm bowl mount tripods. It has 9 + 0 steps of counterbalance and 3 + 0 steps of pan/tilt drag adjustment. A total tilt range of +90° to -75° allows for intuitive framing of your shots.
Mount your camera using the slide-in balancing plate with a 1/4"-20 screw and locating pin. With a sliding range of 4.1", this head can adapt to any rig configuration. Additional features include a detachable pan bar and an illuminated bubble level. An integrated flat head base allows the Ace XL Mark II to be mounted onto a slider.
Ace XL Fluid Head Two-Stage Aluminum Tripod 17.6 lb Load Capacity 9-Step + 0 Counterbalance 3-Step + 0 Pan/Tilt Drag Mid-Level Spreader, Rubber Feet
Key Specs | |
---|---|
Camera Mounting Screw | 1x 1/4"-20 Male |
Camera Plate | Quick Release w/ Sliding Balance Plate |
Head Type | Fluid Head |
Drag Control | Yes |
Load Capacity | 17.6 lb / 8 kg |
Weight | 3.7 lb / 1.7 kg |
Camera Attachment | |
Camera Mounting Screw | 1x 1/4"-20 Male |
Camera Plate | Quick Release w/ Sliding Balance Plate |
Plate Dimensions | 5.5 x 2" / 140 x 50 mm |
Head | |
Head Type | Fluid Head |
Base Mount | Flat Base with 3/8"-16 Female (75 mm Half Ball via Included Adapter) |
Counter Balance | Incremental 9-Step Plus 0 |
Pan & Tilt | |
Drag Control | Yes |
Vertical Tilt | +90° to -75° |
General | |
Load Capacity | 17.6 lb / 8 kg |
Bubble Level | Yes (Illuminated) |
Weight | 3.7 lb / 1.7 kg |
Packaging Info | |
Package Weight | 6.895 lb |
Box Dimensions (LxWxH) | 17.8 x 10.3 x 7.5" |
Related Questions and Answers
Q: 1. How much does this tripod weigh?
A: The Sachtler Ace M Fluid Head with 2-Stage Aluminum Tripod & Mid-Level Spreader weighs 9.7 lb.
Q: 2. Can this tripod be used with a Canon EOS C100 II camera?
A: This tripod has an 8.8 pound load capacity. If the lens and accessories used on the C100 Mark II keep the total weight below 8.8 pounds it will work. The Sachtler Ace XL with a 17.6 pound load capacity is a bit of a better fit for a cinema camera as it gives you more room to mount heavier lenses and accessories with the camera. https://bhpho.to/2tVAXEO
Q: 3. What kind of wheels will go on this tripod?
A: None that I know of. You would have to first purchase some kind of replacement feet. Three of my four tripods have feet made to clip into a set of wheels with detachable foot pads but this one does not. This tripod isn't very sturdy either and the head has a lot of spring back. I also own its big brother with the FSB4 head and composite legs. There is a day and night difference between the two but also more than double the price.
Q: 4. Can I mount a Sony A7iii on the back of the plate without it interfering with my lens operation or mount it near the front of plate without plate protruding too far off back of camera to get face close enough to viewfinder after quick release?
A: The A7iii should fit fine on the Sachtler Ace M System Black Edition with Tripod & Mid-Level Spreader (75mm Bowl) if screwed into the back of the plate not the forward.
Q: 5. Can i use manfrotto plate to this tripod? i want to quick release to my manfrotto monopod and Glidecam HD2000!!
A: yes, plate of Manfrotto 502 or 504 will work
Q: 6. Is it possible to easily remove the tripod head for airline travel?
A: Yes.
Q: 7. Can the leg-angle be locked without the spreader? Most other brands have three angle positions for legs. I can't find a way to lock the angle without the spreader.
A: I am afraid not: The spreader clamps must be used to lock the leg positions.
Q: 8. Does this tripod work with the Nikon D5500? Do I need any other accessories to make it work?
A: You will need the appropriate Nikon quick release camera plate that will slide into the tripod and lock in place.
Q: 9. Hi, can I use this ace m fluid head on a sirui monopod?
A: We're afraid not. The head in this tripod only connects to a 75mm bowl. You will not be able to use it on a Sirui Monopod.
Q: 10. Can the head from the Sachtler Ace M be put on a different tripod base?
A: As far as i can see, Sachtler heads can do both bowl and flat base mounting
Top Bestselling Products
Sirui T-1205 Carbon Fiber Travel Tripod With K-10 Ii Ball Head
$747.00 $911.34
Canon Lucia Pgi-9 Yellow Ink Tank
$38.97 $58.07
Samurai Traveller Outdoor 9000 Tripod With Pan/tilt Head
$239.97 $295.16
Canon Lucia Pgi-72 Cyan Ink Tank
$42.00 $55.86
Miller Cx14 Fluid Head & Solo-q 100 2-stage Carbon Fiber Tripod Kit
$12,327.39 $17,997.99
Slik Clamp Head 38
$239.85 $307.01
Ice 72mm Adapter For 100mm Pro Filter Holder
$29.85 $37.01
Canon Pixma Pro-200 Wireless Professional Inkjet Photo Printer
$1,497.00 $2,140.71
Canon Pfi-1700 Yellow Pigment Ink Tank (700ml)
$951.00 $1,141.20
Lenscoat Gimbal Tripod Head Cover (digital Army Camo)
$132.75 $179.21
Oberwerk 4000 Series Tripod With Fluid Head
$749.85 $1,012.30
Sunpak 4300 Pro B Ballhead (black)
$119.91 $187.06
Ulanzi Mt-60 Carbon Fiber Travel Tripod With Ball Head
$359.85 $510.99
Products You May Like
Sescom 3-pin Xlr Male To Rj45 Cat 5 Adapter
$32.85 $45.00
Portabrace Tlq-46xtor/digi Quick Tripod/light Case With Wheels (digital Camo)
$1,397.31 $1,690.75
Deity Microphones Asm2 Pro Adjustable Shockmount Kit
$447.00 $603.45
Canon Cine-servo 17-120mm T2.95-3.9 Lens (canon Rf)
$71,550.00 $90,868.50
Nexto Di Express P2 Module For The Nsb-25
$419.97 $579.56
Vizrt 10-hour Professional Services Plan
$7,485.00 $9,131.70
Windtech Us-3 Ultra Series Universal Windscreen
$74.97 $113.20
Blazar Lens Great Joy 85mm T2.9 1.8x Anamorphic Lens (e-mount, Amber Flare)
$4,197.00 $5,749.89
Olight Oknife Beagle Folding Knife (black)
$227.85 $289.37
Pelican Tx50 Adventure Case (od Green, 34.5l)
$599.85 $869.78
Boya By-dm500 Dynamic Xlr Podcast Microphone
$299.97 $368.96