Whether on location or on a vacation, you can meet all your charging needs with the Power 1000 Portable Power Station from DJI. Inside its compact and rugged frame is an LFP (LiFePO4) battery with a 1024Wh capacity. It's a lithium-ion battery with enough storage to charge a drone, phone, or microwave oven. Eight different ports and outlets provide up to 2200W of stable, continuous power. Connect devices via USB-A, USB-C, AC, SDC, or SDC Lite. Thoroughly tested and carefully engineered, the Power 1000 provides safe charging time after time. When you need to recharge the Power 1000 itself, you can use a wall outlet or, with optional accessories, solar power or your car.

Provide Power to Devices & Appliances    LFP Battery with 1024Wh Capacity    Up to 2200W of Stable Power Output    Built-In Safe-Charging Technologies    2 x 140W USB-C PD 3.1 Ports    2 x 24W USB-A Ports    2 x 3-Prong AC Outlets    1 x SDC & 1 x SDC Lite Port    Supports Optional Solar & Car Charging    Built-In Color Power Status Display

An array of eight power output ports supports a wide-ranging list of mobile devices and appliances. Camping and family road trips can power fans, a refrigerator, coffee machine, and more for hours. Professionals on location can recharge drone batteries, laptops, phones, cameras, and more, dozens of times. Below is a list of the eight built-in ports you can choose from:

• Two USB-C PD 3.1 with a maximum of 140W from each port
• Two USB-A with a maximum of 24W from each port
• Two 3-prong AC outlets
• One SDC port
• One SDC Lite port

Safety is paramount when it comes to a power station of this caliber, which is why DJI uses the Swiss-based testing authority, SGS, to test its comprehensive safety design. The Power 1000 earned 26 of the testing certifications. Specific safety features of the Power 100 power station include:

• Intelligent Battery Management System (BMS): If built-in safe-charging metrics are exceeded, the BMS will automatically shut the Power 100 down, and auto-restart it when the power status normalizes.
• Temperature Sensors: A series of 11 temperature sensors continually monitor heat dissipation, maintaining effective charging, even in conditions with temperatures up to 104°F.
• Power Outage Protection: Throughout the Power 1000 are 10 fuses to provide short circuit protection.
• Robust Design: The power station is made to support up to 220 lb of weight and is constructed from a flame-retardant material.

With optional DJI Power SDC charging cables, you can use the SDC port on the Power 1000 to fast-charge various DJI drone batteries.

• Mavic 3: Go from 10% to 95% charge in approximately 32 minutes
• Air 3: Go from 10% to 95% charge in approximately 30 minutes
• Inspire 3 (TB51): Go from 10% to 95% charge in approximately 28 minutes
• Matrice 30 (TB30): Go from 10% to 95% charge in approximately 32 minutes

The Power 1000 will default to UPS Mode when it is drawing power from an AC outlet and a device is charging via one of the Power 1000 AC outlets. In this mode, if grid power were to fail, the UPS system would power the connected device within 0.02 seconds.

Recharging the Power 1000 can be done in one of three ways: Grid, Solar, and Car. Charging via an AC outlet can be done with the included power cable, but solar and car charging require optional accessories that are not included.

• Grid Power: This is the fastest method that simply requires an available AC wall outlet. In standard recharge mode, 600W is delivered to the Power 1000, while 1200W is provided in fast recharge mode. Recharging to 100% takes approximately 70 minutes in fast charging mode, or up to 120 minutes with standard charging.
• Solar Power: This method requires an optional DJI Power Solar Panel Adapter Module, which supports 1-3 optional solar panels. The modules use MPPT (Maximum Power Point Tracking) to operate the solar panels, which is an intelligent algorithm that provides real-time monitoring and optimized, efficient charging. You can also choose to use two modules and 4-6 panels for faster charging. DJI recommends DJI-certified solar panels from Zignes. With a 100W solar panel, you get a minimum charge time of up to 11 hours, or up to nine hours with a 120W panel.
• Car Power: This method requires the optional DJI Power Car Power Outlet to SDC Power Cable (12/24V) attached to a car charger, or you can use that optional cable with a single optional solar panel. While charging in your car via either 12V or 24V, charge times are up to 14 hours.

A convenient built-in color display gives you essential information about the Power 1000 power station at a glance. It shows you power input, power output, and the current battery level of the Power 1000.

• Up to 2600W of 30-second power output (at 77°F battery temperature and 50% battery level)
• Up to 4400W of peak power output
• LFP power cell has a lifespan of approximately 10 years
• Supports up to 3000 charging cycles
• Ultra-quiet 23 dB operation while recharging
• Two 1/4" threaded holes
• Integrated carry handle

Related Questions and Answers

Q: 1. what kind of cable would be best when using this battery to power the zoom f3? BH #ZOF3

A: You could use the Pearstone USB 3.1 Type-C to USB Type-A Charge & Sync Cable (3') BH#PEUSB313CMA3.

Q: 2. can i use this Furman PST-8 in korea ( 220V / 60hz ) ac power input condition?

A: The Furman PST-8 Power Station cannot operate above 135V of power.

Q: 3. What is the surge protection and other functional difference between this and the PST-6? I want to know if both units offer the same protection agains spikes, surges, lightning etc.

A: They do not offer the same level of protection. The pst6 is NOT simply a pst8 with fewer plugs. The pst8 has Furman’s most robust surge protection technology - the same that it uses on its larger, more expensive offerings. The Furman pst8 is the entry into the top tier protection offering and a great value for what you get. See the Furman site for detailed specs.

Q: 4. can I use a short extension cord between my computer and the input socket of this unit to get around the limited spacing of the outlets? Will the extra cord limit the protection?

A: Yes, you can use an extension cord although I would recommend making sure it is rated to handle the device before using it.

Q: 5. what king of warranty/guarantee does this product have?

A: This product comes with a 3 year manufacturer warranty

Q: 6. I have a 1500 solar generator and I may need a new battery. I have not charge it for some time and I have had it plugged in for more that 24 hours and the indicator light is still red. Any suggestions, or will I need to buy a new battery??

A: You probably need a new battery... If a battery goes below a certain voltage for any period of time it can damage the cells. I charge mine to full every two months or so... It keeps the battery healthy and its always ready for me when we lose power. I hope that helps.

Q: 7. Hi，I wanna ask is it able to power up the smallrig 450B Led light，and if possible could you tell me how long

A: The Anker SOLIX C1000X Portable Power Station (1056Wh, 1800W), BH # ANSLXC1000X, will power the SmallRig RC 450B COB Bi-Color LED Video Monolight (BH # SM3975) for approximately 2 hours max.

Q: 8. What cable do I use to charge the flip 36?

A: You can use a USB extension like the B&H # PEUSB3AA6 with the GOAL ZERO Flip 36 10050mAh Portable Power Station (Black) BH #GO21950.

Q: 9. Will this work on home stereos and reduce the hiss/hum coming from the speakers when no input is selected just everything powered on. Guessing its from the amplifier. Thanks

A: You can give it a try but more than likely you have other issues (e.g., grounding; interconnection; equipment like your amp) causing the hiss and hum.

Q: 10. What is the difference between the Furman pst-6 and the Furman pst-8D in power conditioning properties.Am I not getting as good conditioning from the pst-6??

A: According to the Furman site, the PST-6 has EMI/RFI filtration, under- and over-voltage shutoff. But the The PST-8 series has LiFT where AC noise is suppressed evenly so it does not add noise, and the SMP technology which is extreme voltage-shutdown which is the most common damaging event. I have the PST-8D and it improves the tv picture and somewhat computer visual both plugged into the digital part, isolating digital and analog inputs. I don't know if PST-6 would do those as much. But you can call Furman and ask them yourself. Hope that helps.