This ultracompact MP-FC1 Fanless Mini PC Complete System from Xenarc is a complete system designed for vehicle installation in industrial computing applications. Capable of being powered by a 12 VDC outlet, the unit has a power consumption of less than 60W. This complete configuration features an Intel 2980U Celeron 1.6 GHz CPU with 4GB of DDR3-1600 memory, integrated Intel HD graphics, and a 512GB 2.5" SATA SSD.

Two USB-A 3.0 ports and three USB-A 2.0 ports can connect peripheral devices like keyboards, mice, and flash drives. A DisplayPort and DVI-D port output video to compatible sources. Two RS-232 serial ports and a built-in Intel i218LM 100/1000 MB/s Ethernet communication connection offer different forms of control.

Onboard Intel 2980U Celeron 1.6 GHz CPU    4GB 1600 MHz DDR3/L RAM    Integrated Intel HD Graphics    512GB 2.5" SATA SSD    DisplayPort and DVI-D Outputs    2 x USB 3.0, 3 x USB-A 2.0 Ports    2 x RS-232 Serial Ports    Gigabit Ethernet Port, AC Adapter

Related Questions and Answers

Q: 1. Can more memory be added?

A: If you're referring to RAM, 16GB is the maximum that can be installed in the ASUS ExpertCenter PN42 Desktop Computer.

Q: 2. Can I configure it with WiFi?

A: By connecting a wireless router to the ethernet port on the back of this device, you can create a wifi network and control it via an iOS or Android app.

Q: 3. HelloSo if I have a pair of JBL 15 . Powered speakers with a pair of powered subs do I connect my full range to the high or mid output?

A: Connect to the HIGH outputs and carefully adjust crossover settings and EQ.

Q: 4. Can I connect an amp for full range speakers to high and another amp to low for a sub, then set it to cross over appropriately?

A: This unit allows single, bi or tri-amped configurations.

Q: 5. Is this compatible with lin arrays?

A: Yes, this can be used to manage any PA system.

Q: 6. Hello, I have a question to make purchase dbx DriveRack PA2 Complete Loudspeaker Management System is included RTA-M Microphone for free?

A: RTA microphone not included

Q: 7. can i use crossover settings on full range application 1? which it have only high output enable.

A: Thank you for your question. If you use the high output enable in a full range application you are by passing any crossover settings and it would basically be a line output

Q: 8. What are the dimensions of the driveRack PA2 component?

A: The Driverack PA2 is designed to occupy a single rack space in a 19 rack. W = 19 , H = 1.75 , Depth = 5.875

Q: 9. CAn i use this with some Mackie SR1530 Self Powered 3Way Full Range Speaker?

A: The Driverack PA2 is able to accommodate both powered and passive systems with amplifiers. The Mackie will connect via XLR cables. Passive Subs such as the CV218 will connect to an amplifier which in turn connects to this unit. Unfortunately there is no preset available for the Mackie speakers, however the unit can be tuned manually.

Q: 10. my dbx driberack screen is blank sometimes it will come up but not always. Pls what could be the solution

A: Check all connections and then check them again. Swap out cables if necessary.If you are confident your connections are not the issue, then perform:Factory Reset:The Factory Reset function resets all user presets and Utility settings in the PA2 back to their factory default state.WARNING! Performing the Factory Reset procedure will permanently reset all user presets and set all PA2 settings back to their factory default state. This operation is irreversible.To perform a Factory Reset:1. Power down the DriveRack PA2.2. Press and hold the STORE button then apply power to the DriveRack PA2. Keep the button pressed until the FACTORYRESET Release STORE button message appears in the LCD display then release the STORE button.3. Press the WIZARD button to perform the Factory Reset procedure. Press the STORE button to cancel the operation.Soft Reset:The Soft Reset function resets all Utility settings in the DriveRack PA2 back to their factory default state without resetting user presets.To perform a Soft Reset:1. Power down the DriveRack PA2.2. Press and hold the UTILITY button then apply power to the DriveRack PA2. Keep the button pressed until the SOFT RESETRelease UTILITY button message appears in the LCD display then release the UTILITY button.3. Press the WIZARD button to perform the Soft Reset procedure. Press the UTILITY button to cancel the operation.