Power your Xenarc 1219 or 1569 series monitor with this DC Power Cable. The cable features DC barrel connectors on either end and supports 12 VDC of input power. It measures 16.4' in total length for efficient cable runs.

For 1219 and 1569 Series Monitors    12 VDC Power Cable    DC Barrel Connectors    16.4' Total Length

Related Questions and Answers

Q: 1. Will this also work with the Strobies 360 Flash Unit? The Bolt and Strobies units appear to be identical.

A: I have one Genesis 400 (Calumet brand), a Godox AD360ll, and Flashpoint Streaklight 360ll- and all are the same ports, same plugs and the doubler cables are interchangeable with all 3.

Q: 2. Do you remove the top foam from the case to do this? Instructions don't tell me.

A: Yes, the top foam needs to be removed from the case to install the Pelican 1569 Lid Organizer for Pelican 1560 Case.

Q: 3. Will this work on a SmallHD Focus? I want to power the monitor to a SWIT S-8D98.

A: Yes it will work, if using the SWIT S-8D98 battery, it outputs 7.2V

Q: 4. Is this compatible with the Atomos Shinobi?

A: The SmallRig USB-C to DC Power Cable for RC 30B is a dedicated cable that's only compatible with the SmallRig RC 30B video light. It's not compatible with anything else.

Q: 5. Does it actually cut the recycle time to 0.5 s when operating an on-camera flash on full power?

A: Yes and no. The flash recycle time is so fast, it's hard to truly time the action with just ones seances. 0.5 of a second is quick, so with measuring equipment one could get an exact refresh rate. So yes, the flash recycle time certainly feels incredibly fast, very very very fast. Is it exactly 0.5s faster. Probably.

Q: 6. Can use this with a Dtap port from a camera battery using a Dtap to 4pin hirose adapter?

A: It should work with your camera if you have a cable like the CAMVATE D-Tap to 4-Pin Hirose Cable (B&H # CAC2379).

Q: 7. Input voltage ? Out put voltage

A: I use this cable with the LanParte V-Lock battery pinch. It comes out of the 7.4v output and into my C100mkii which says 8.4v on the input.

Q: 8. Does B&H sell a longer version of this cable with the same specs?

A: It seems like we do not, but you can also use a dummy battery to D-tap cable as well. LP-E6 dummy battery: https://www.bhphotovideo.com/c/product/1361801-REG/indipro_tools_cptlp6_indipro_coiled_d_tap_to.html Sony L-series NP-F dummy battery: https://www.bhphotovideo.com/c/product/1299021-REG/gyrovu_gv_dtap_sl_d_tap_to_sony_l.html

Q: 9. Can I use this with the Tilta Universal Power Supply to power my C100mk2? There is an 8V output on the Tilta system.

A: With sleeve power connections, there is no universal standard. And manufacturers, being desirous of being preparatory, do not release the dimensions of the sleeves consistently. On the Lanparte, they list the camera end as being a 4.8/1.7 mm DC barrel power but no mention of the size that goes into the Lanparte. Unfortunately, B&H cannot test this combination. While we see no danger from trying to use this cable, we cannot guarantee that it will work.

Q: 10. Will this power a Small HD indie 7 monitor through a smallrig v mount 99wh battery?

A: Yes, the IndiPRO Tools 2.1mm DC to L-Series Dummy Battery Unregulated Cable will power the SmallHD INDIE 7 Touchscreen On-Camera Monitor.