Suitable for studios, mobile trucks, staging, and other applications, the 150' Canare Mini RG59 12G-SDI / UHD 4K BNC to BNC Cable is capable of carrying up to a 12G-SDI UHD 4K signal and can also be used for HD-SDI, 3G-SDI, and 6G-SDI applications. The cable is terminated with 75-ohm connectors, featuring a nickel body and gold-plated contacts.

Carries 12G-SDI UHD 4K Signal    Also Suitable for HD/3G/6G Applications    75-Ohm Nickel Body Connectors    Gold-Plated Contacts    21 AWG Solid Annealed Copper Conductor    91% Tinned Annealed Copper Braid Shield    Highly Foamed PE Insulation

• Terminated with Canare 12G 75-ohm connectors
• Carries a 12G-SDI UHD 4K signal (SMPTE ST2082-1)
• 21 AWG solid annealed copper center conductor
• Highly foamed PE insulation for great attenuation characteristics
• Copper laminated tape outer conductor 1
• ≥91% tinned annealed copper braid outer conductor 2
• Nickel body and gold-plated contacts

Related Questions and Answers

Q: 1. Does this aplifying the SDI signal or just transsfering?

A: This mini converter converts SDI to optical Fiber and will also convert optical fiber back to SDI. For long runs, you can have one at each end or directly connect fiber to many of the Blackmagic products.

Q: 2. Can you input xlr audio into this with no video signal connection, then take the sdi output to control room? OR does it have to have a video signal?

A: You will need to feed an SDI video signal in order to embed audio.

Q: 3. Update previous question, Can 3D luts use separately?

A: There are 2 LUTS which may be used but only one applied at a time.

Q: 4. Timecode output.Is it LTC?

A: You may chose to extract timecode from the SDI input instead of audio out the XLR. Yes it is LTC.

Q: 5. Can I use this to distribute the Program Output from BMD Atem 2 M/E Production to 3 BMD Studio Camera HD for Tally and Talkback?

A: Yes, you can.

Q: 6. Will this take an analog composite signal from let's say a hi8 (576i) and up convert it to 1080 and up?

A: Yes, you can use this converter to upconvert an SD analog composite signal to 1080 HD-SDI.

Q: 7. Would this allow the SDI output from the Blackmagic talkback converter to interface over XLR to other intercom systems?

A: You can extract the Talkback audio in SDI 15/16 with this converter.

Q: 8. Is this compatible with the Blackmagic Design BMD-CONVMOF, the standard Optical Fiber Mini Converter?

A: Yes, it's compatible.

Q: 9. What is the size of the DC power connector, is it a 2.1mm locking?

A: The Blackmagic Design PSUPPLY-INT12V10W Power Supply for Mini Converters power supply's barrel is: inner diameter 2.5mm / outer diameter 5.5mm.

Q: 10. Am I able to split a 4K signal into 4 1080p quadrants for a video wall application? (Similar to the Datapath FX4)

A: Yes, you could use the Blackmagic Design Teranex Mini 12G-SDI to Quad SDI Converter for a video wall setup.