This Profoto Mount for Zoom Focusing System from SMDV allows a Profoto-type strobe or LED monolite-style head to be quickly and easily mounted onto the adjustable boom arm. This head mount faces the light source inwards towards the softbox interior from the front for a more reflective light spread. It features all-metal construction and a female receiver with a locking knob.

Profoto Head Mount for SMDV Zoom Focusing Softbox System

Related Questions and Answers

Q: 1. what is the the outside diameter of the base? I'm needing it to be 5.625" (5 5/8").

A: The adapter is designed to work with a specific unit and its exact measurements are not published.

Q: 2. Will this properly fit the Speedotron 7 grids? a href= http://www.bhphotovideo.com/c/product/50293-REG/Speedotron_14619_7_Honeycomb_Grid_Set.html target= _blank http://www.bhphotovideo.com/c/product/50293-REG/Speedotron_14619_7_Honeycomb_Grid_Set.html/a

A: They do not. I purchased after seeing the answers below and they are wrong. You'll either need to buy the Profoto grids or find a used 7" refector.

Q: 3. What is the diameter of the lip side that goes into the softbox? Please go measure it ;)

A: The rubber ring of the SMDV Mount Adapter for Profoto Flash Heads (B&H# SMPROFOTOAD) is designed to be large enough for it to slip onto Profoto strobe heads such as the Profoto B1, B1X, B10, B10 Plus, B10X, B10X Plus, and so on. Rather than relying on a constant size, articulating the lever on the side of this adapter effectively constricts the opening of the rubber side of the ring so that it grips the front of those strobes securely. To be clear, the ring is not a constant size but rather becomes tighter (i.e. more constricted) when one flips the side lever. Given that it's made of rubber and not molded plastic, you should expect some variance both in its inner diameter and also at different ambient temperatures. However, it will work with the aforementioned strobes and also with any other strobe that can utilize the same speed rings and inserts as those.

Q: 4. Again please measure the side that attaches to the softbox, not the clip side. Your previous answer refers to the wrong side.

A: The diameter of the side that attaches to the softbox is 5 5/8".

Q: 5. Will this reflector fit on a pro 7b head? Thanks!

A: Yes, the Profoto Zoom Reflector 2 will fit on the Profoto Pro 7B head. This head still uses the standard Profoto Speedring making it compatible.

Q: 6. Will this reflector work with a Profoto Acute 2 head?

A: Yes it will. I have them and the zoom 2.

Q: 7. Hi, what size diameter is the Profoto Zoom Reflector 2? What is the weight? Thanks. Paul

A: The interior diameter is 7 3/16 in. A Profoto grid that fits inside is about 7 1/8 in diameter ( a little less). As for the weight, it's less than a pound ( approx. .6 pounds). It's very light. Some else give you the 7.6 in dia. which is the outside dim.

Q: 8. Will this fit the D1 Air heads?

A: Yes.

Q: 9. Does this zoom reflector fit a Profoto B2 flash?

A: Yes, this Profoto Zoom Reflector (White) can fit on a Profoto B2 flash head.

Q: 10. Does this zoom reflector fit a Profoto B10 flash?

A: Yes, you can use the Profoto Zoom Reflector for Profoto - 65-110 Degrees with a Profoto B10 flash.