Control and protect your installed sound system with the Ashly Protea NE24.24MT, a network-enabled DSP speaker processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne24.24m has four analog inputs and four analog outputs as standard. Use the four option bays to provide additional I/O and functionality. This model includes two 4-channel input cards and one 4-channel output card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

Standard I/O: 4 Inputs & 4 Outputs    10/100 Ethernet and RS-232 Interfaces    24-Bit A/D-D/A Audio Resolution    Extensive DSP via Protea Software Suite    Easy and Intuitive User Interface    Option Bays for Expanded Functionality    Windows Compatible

• 10/100 Ethernet & RS-232 computer interface standard
• Extensive DSP available
• Easy and intuitive user interface
• Mic/line inputs
• 24-bit A/D–D/A audio resolution
• Up to 24 channels of audio processing
• 4x4 base unit configuration
• Expand inputs or outputs 4 channels per module
• Modules easily field installable
• Euroblock connectors for audio, preset recall, DC remote level control, and data in/out
• 31 preset locations
• Remote controls for level, preset recall, and programmable functions
• Third-party control-friendly
• Input and output metering viewable in dBu
• Multilevel security

• Input source selection
• Brick wall limiter
• Compressor
• Autoleveler controls
• Ambient noise compensation (output only)
• Ducking (high/low priority, trigger, filibuster, ducked program)
• Gate
  • Advanced gate controls
• Gain
• EQ:
  • 15-band parametric
  • High/Low Shelf 6/12 dB per octave
  • All-Pass
  • Variable Q HP/LP
  • Notch/Band-Pass
• Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
• Delay:
  • Input time, distance, and temperature at 48 kHz sampling rate
  • Input time, distance, and temperature at 96 kHz sampling rate
• Audio metering tool
• Signal Generator Tool (pink noise, white noise, sine wave)
• Matrix mixer
• Processors

Related Questions and Answers

Q: 1. what else should i get to make a copllete virtualset epuipment ?

A: You will need at least 1 Ultimatte 12 and an Ultimatte Smart Remote 4 to control them and key your set. You will also need cameras and a virtual set software.

Q: 2. Which 8K-capable cameras can be used with Ultimatte 12? What about the URSA 12K?

A: There are very few cameras that output 8k at this time. But Studio camera systems like the Sony UHC-8300 is one option. https://bit.ly/3xsWeG0

Q: 3. How different is this keyer than say the Atem HD8 keyer or the Atem mini pro keyer?

A: The Blackmagic Design Ultimatte 12 HD Mini Keyer/Advanced Compositing Processor is much more advanced than the keyer built into the ATEM Switchers. With the Ultimatte model, you will have many more options to clean up the key.

Q: 4. Do you need the controller to operate the key?

A: I spoke to a Blackmagic tech support guy yesterday and he said you do not need the Smart Remote Controller to operate the Ultimatte 12. It does make controlling the unit and setting up a key, a lot easier but there is a software based controller that you can download for free on the Blackmagic website, on their support page.

Q: 5. Why don't inputs 2,3,4 (B, C, D) on the 8k function? Only input one (or A) works!

A: When receiving an 8K signal, the Blackmagic Design Ultimatte 12 8K Keyer/Advanced Compositing Processor uses all 4 inputs for the single 8K signal as quad link is required for the full 8K resolution.

Q: 6. I am looking at the IOGEAR Wireless 5 x 2 HD Matrix Pro with Three Additional Receivers, are there any other product choices that accomplish the same idea?

A: We do not offer a similar product with the same functionality.

Q: 7. So on inputs 9/10 and 11/12, if you plug your single mono input into the left channel, it will come across both L and R in mono?

A: No, input 9 is routed directly to Main L and input 10 is routed to Main R. 9/10 are controlled by a single fader and share controls, but there is no summing taking place. This is true for both stereo channels of the Zoom LiveTrak L-12.

Q: 8. Hi, I bought L-12 and I am unable to use it as audio interface, but it works fine as stand alone. I put the selection switch to audio interface and downloaded the drive for windows for my desktop and select ASIO then the zoon L-12 is selected but doesn't show any tracks. Am I doing anything wrong here?

A: Please email info@zoom-na.com or call (631) 542-5270 and we can assist.

Q: 9. Can the Ultimatte 12 Mini output Program HDMI and SDI simultaneously? (For example to a Switcher and a PC at the same time)?

A: Yes, the Blackmagic Design Ultimatte 12 HD Mini Keyer/Advanced Compositing Processor can output both from the SDI and HDMI simultaneously.

Q: 10. Will this fit the matrix II?

A: Yes, this fresnel lens can fit the Fiilex Matrix II.