The green Canare L-5CFW RG6 BNC Male to Right Angle BNC Male HD-SDI Video Cable is a 75' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Will this work with a Rodelink Wireless system?

A: Absolutely! Works like a charm. Just remember it won't screw down into the mic Reciever unit, so pick a safe spot in your bag/rig to avoid straining the cable.

Q: 2. Will this cable allow me to attach a Rode VideoMic Pro Plus mic to the XLR input on Canon C100 Mark II video camera? THANKS!

A: No, you will use a Rode VXLR to make the conversion: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html

Q: 3. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 4. what is the recommended crimp tool for this connector?

A: The Canare BCP-D55UHD 75-Ohm BNC Male Crimp Connector for L-5.5CUHD Cable (B&H# CABCPD55UHD) may be crimped with this Crimping Tool: Canare TC-1 Handheld Crimp Tool (B&H# CATC1) https://bhpho.to/3AOXHZA and with this die set: Canare TCD-55UHD Crimp Die Set for BCP-D55UHD Coaxial Cables (B&H# CATCD55UHD) https://bhpho.to/3O6yhcT

Q: 5. Can this be used for other wireless receivers, to feed an XLR input on a recorder?

A: Yes you can!

Q: 6. does it carry stereo signals through this cord? Thanks;)

A: Yes the Movo Photo MC1 carries stereo signal.

Q: 7. Is this cable compatible with the Sony Fx6?

A: While the CAMVATE 12G-SDI Right-Angle Male to Right-Angle Female BNC Cable indicates that it is for the ARRI ALEXA Mini and RED KOMODO, we see no reason it could not also work with the Sony FX6.

Q: 8. Is the XLR end stereo?

A: No. You would be taking the Stereo signal and combining to a mono input at XLR end.

Q: 9. why only red?

A: For the Digitalfoto Solution Canare LV-61S 12G-SDI Right-Angle Video Cable (7.8-), currently there are only the Red color available in the 7.8" variety. Often different colors are used to be able to quickly sort out length or purpose of a cable, when used in a studio environment.

Q: 10. Which HDMI standard is this? Can it handle 4K30?

A: The max resolution support on the Pearstone HD-ARACMAF is 4096 x 2160.