Easily mount binoculars on a tripod for stable, steady viewing with this CC-09 Universal Binocular Tripod Adapter Super Clamp with Arca-Type Plate from Sunwayfoto. The adapter clamps onto one ocular tube to hold the binoculars securely, and it attaches to a tripod via an Arca-style dovetail plate or tripod mounting stud. The clamp accommodates ocular tubes from 1 to 2.6" in diameter and works equally well with roof and Porro designs. The Arca-type plate has one 3/8"-16 and two 1/4"-20 sockets. Made of hard-anodized T6061 aluminum with a stainless steel bearing rod, the adapter can be expected to provide years of service.

Fits Ocular Tubes 1 to 2.6"    Fits Roof & Porro Binoculars    Mounts on Arca-Type, 1/4"-20, or 3/8"-16    Aluminum & Stainless Steel Construction    Lightweight at 6.4 oz

• Twist the knob to tighten the clamp onto one 1/2.6" ocular tube
• Accommodates roof and Porro styles
• Adapter base fits Arca-type dovetail plates
• Base also has one 3/8"-16 and two 1/4"-20 sockets for tripod studs
• Aluminum and stainless steel construction

Related Questions and Answers

Q: 1. Will this work with the Victory 8x32 FL and the new Victory 8x42 SF ?

A: It will work with most any binocular including the two models you cited. The only binoculars it may not work with are very wide body Porro Prism binoculars, i.e. a 10x50 Porro.

Q: 2. Is the clamp compatible with peak design standard capture plate?

A: Yes, this clamp are compatible with Peak Design Dual Plate v2 for Capture Camera Clip BH #PEPLD2. This plate is standard arca type.

Q: 3. Compatible with a Arca-Swiss P0?

A: This would not work directly with the Arca-Swiss pO. However, the Acra-Swiss plates that work in the pO will work in this clamp.

Q: 4. What keeps this from just spinning? I have a Gitzo ball head I'd like to convert to a QR clamp system.

A: The hex bolt that is currently holding your quick release clamp will prevent this 3 Legged Thing Universal Lever Clamp from spinning.

Q: 5. Can I adjust the width of this clamp to fit other manufacturer's Arca-Swiss plates?

A: The width cannot be changed as it needs to comply with the Arca standard width.

Q: 6. Does it have threaded holes? I would like to add it to my gimbal for an arca qr.

A: Yes, it comes with a 3/8"-16 threaded mounting point. You will likely need a bushing adapter to downsize it to 1/4"-20 in order to mount it to your gimbal. See the following: https://bhpho.to/3aNsN5U https://bhpho.to/3jGSuZI

Q: 7. Which of Manfrotto's many Quick Release systems does this support? RC2, RC4 etc. I want something that will allow me to use my Arca Swiss-style camera and lens plates with a Manfrotto pan & tilt, or gear heads. Is this it?

A: No, Manfrotto doesn't have arca swiss-style quick release plates. You will have to buy an adapter

Q: 8. combatible MVH500AH ?

A: You may screw this to the MVH500AH's plate (500-series plate) to use arca-swiss or 200PL plates on your head. But by itself, this clamp will not the longer/wider Manfrotto 500-series plate.

Q: 9. What is the max load on this clamp? Cannot find it even in Sunwayfoto's site

A: I do not have definitive or spec-based answer, but based on my experience I could clamp heavy weight set, D850 + battery grip + Nikon 70-200 f2.8 / Tamron 15-30 f2.8, about 3 - 3.5kg, with manfrotto tripod. No problem to transfer on my shoulder. However I never trust any type of gear when the transfer so I use neckstrap with my arm all the time so I can catch if my gear drops. I hope this might be a help.

Q: 10. would this screw directly onto the notched neck of a RRS bh-40 or would I need some flat plate adapter on the BH-40 first to then mount this sunwayfoto clamp to?

A: These clamps are designed to fit universally.