The red Canare L-5CFW RG6 BNC Male to Right Angle BNC Male HD-SDI Video Cable is a 175' cable that is hand-assembled with Canare extra flexible L-5CFW HD-SDI RG6 coaxial cable, and Canare true 75-ohm HD BNC connectors. This cable is 100% sweep tested to conform to SMPTE 259M, 292M, 424M, 2081-1, and 2082-1 standards. The combination of Canare BNC connectors used in this series exceed 3.0Gb/s HD-SDI requirements specified in SMPTE 424M and are fully rated for extended distances for 3G-SDI ST424 out to 340 Feet.

18 AWG RG6 SDI Coaxial Cable    BNC Male to Right Angle Male Connectors    Solid Copper Center Conductor    Foam PE Dielectric Insulation    Dual Copper Braid    100% Sweep Tested

Hand made with Canare L-5CFW 18AWG stranded center conductor, 75-ohm Precision HD-Serial Digital Video Coax cable for professional broadcast performance

Cables meet SMPTE 259M, 292M,3G 3G 424M, 6G 2081-1, 12G 2082-1 Standards

Canare BCP-B51F straight, and BCP-LC5F right angle, true 75-Ohm BNC connectors, exceed 6.0Gbps HD-SDI SMPTE requirements

Dual copper braid for flexibility and bending performance

100% sweep tested

Related Questions and Answers

Q: 1. Can I use this cable to plug a Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface?

A: No, the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is not compatible for use with the Deity Microphones V-Mic D3 Pro Shotgun Microphone. The V-Mic D3 Pro requires plug-in power to function, so you will need to use an XLR adapter with a phantom power converter like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DEDXLR), which is the adapter that Deity includes with their location recording bundle for connection to an XLR input, and connect to a device that will supply phantom power. The D-XLR adapter will allow you to use the original 3.5mm TRRS smart cable that comes included with the microphone to convert the plug and enable compatibility for connection to the XLR input on the Focusrite Scarlett Solo USB Audio Interface. You will need to have the phantom power (48V) switch for the XLR input on the interface turned on in order to supply power the mic. If you need a longer cable, simply attach a standard XLR to XLR cable between the XLR input on the interface and the XLR output on the Deity D-XLR adapter. For example, you can use the Kopul Premium Performance 3000 Series Neutrik XLR Male to XLR Female Microphone Cable - 10' (B&H # KOM3010) or similar cable in any length you prefer for your extension.

Q: 2. Is this cable shielded?

A: The DigitalFoto Solution Limited Canare LV-61S 12G-SDI Right-Angle Video Cable (7.8") is a shielded cable.

Q: 3. Will this work with a Rodelink Wireless system?

A: Absolutely! Works like a charm. Just remember it won't screw down into the mic Reciever unit, so pick a safe spot in your bag/rig to avoid straining the cable.

Q: 4. I'd like to connect the line output (3.5mm mini-jack) on my Zoom H5 recorder or my Shure VP83F compact shotgun mic to the XLR input on a Blackmagic Ursa Mini. Is this the correct cable to do so?

A: Yes

Q: 5. Is this cable compatible with the Sony Fx6?

A: While the CAMVATE 12G-SDI Right-Angle Male to Right-Angle Female BNC Cable indicates that it is for the ARRI ALEXA Mini and RED KOMODO, we see no reason it could not also work with the Sony FX6.

Q: 6. How is this cable wired? Is it balanced? I'm looking for T-2, R-3, S-1...

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable (1') is balanced as it has 3 conductors.

Q: 7. Is this balanced or unbalanced?

A: The Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable is an unbalanced cable.

Q: 8. Will this connect properly with good audio quality from the RodeLink Receiver/Rode Wireless Go's Receiver to a camera's XLR input?

A: Yes

Q: 9. Does this work with Sony UWP or UTX series wireless mic receiver? The receiver mini jack has a threaded protrusion for locking. Normal mini jack is too short to fully plug in.

A: This cable is not meant to be used with the Sony UWP/ URX receiver. Here's the direct Sony replacement output cable for that receiver B&H # SOEC0.46BX.

Q: 10. Is the XLR end stereo?

A: No. You would be taking the Stereo signal and combining to a mono input at XLR end.