Audio professionals looking for the very best converters will appreciate the updated Apogee Electronics 16x16 SE Module, a sixteen-channel analog input and sixteen-channel analog output module for the Symphony I/O Mk II. The module occupies one of the two slots available on the chassis. Additionally, two-channel coaxial S/PDIF input and output is also provided. The A/D circuit has been refined to offer a streamlined circuit design, resulting in the most transparent signal path to the A/D stage possible.

The D/A section has been optimized with a more powerful and robust output driver that is capable of driving virtually any input without a decrease in performance, regardless of the load presented by the connected gear. The analog inputs and outputs are offered on DB-25 connectors and require optional breakout cables, available in various configurations to suit individual requirements.

Symphony Mk II Chassis    16x16 SE Module    Thunderbolt Connectivity    Pro Tools HD Connectivity    16 Analog In / 16 Analog Out    S/PDIF I/O    Up to 192 kHz Sample Rate    Dolby Atmos Ready    Color Touchscreen Display

Analog-to-digital and digital-to-analog module for the Symphony I/O Mk II system

Sixteen channels of balanced analog input and sixteen channels of balanced analog output

Two channels of coaxial S/PDIF input and output

Ultralow latency conversion

Entire audio path is DC coupled, resulting in ultra-flat frequency response and extremely low phase error

Related Questions and Answers

Q: 1. what is the mount to tripod? Just one 1/4-20 thread?

A: It uses multiple 3/8 16 and 1/4 20 threaded holes to mount to your tripod.

Q: 2. Hello I have rtx 3090 nvidia that I got from a workstation, the problem with the workstation is that its too small and I need three extras of pcie 4.0 x 16. do you think it will fit?

A: The ASUS Pro WS WRX80E-Sage SE WIFI sWRX8 E-ATX Motherboard has 7 x PCIe 4.0 x16.

Q: 3. Thanks to all for the reviews. Several owners mention the weight of the unit and how it needs to be paired with a heavy/sturdy tripod to keep from toppling. Any reco's on a specific tripod that would work? B&H links the Auray RFMS-580 tripod with this filter. Anybody happen to be using that stand? Sturdy enough? Does it work? Thanks in advance for any thoughts.

A: John if it is not too late, I would recommend a c-stand, like the ones impact make, very solid, especially with a sandbag for good measure.

Q: 4. Does this unit make noticeable fan noise? I found the Roland V-1HD and BlackMagic ATEM Television HD (latest) they all have loud noise and did not work for my quiet studio and now I am looking at this unit. Thank you.

A: According to Datavideo: The unit has a single 2 fan in the back, its rather quiet, but I do not have any comparative testing to back that up.In a recessed equipment rack you probably would not hear it however, it seems that the customer has a single room studio without a control room. What I can say is weve never picked up any fan noise when recording our product videos featuring the 1200.

Q: 5. Hello, I'm currently investing in parts for a new workstation. I was very interested in this motherboard. The idea is to use some parts still from my old computer, and gradually update. I can use these items on this board: AMD Threadripper 3955wx, Gigabyte GTX 1070, 64gb DDR4 memory 2600mhz ?

A: Those items should be compatible. You will need to make sure all the drivers are up to date.

Q: 6. How can I use to be controlled by the pc or where to find the software?

A: You can download the PC control software within the Firmware folder, which you can download from the SE-1200MU page on a href= http://www.resource.datavideo.com/firmware/Datavideo_SE-1200%20Controller%20Small%20v1.3.0.8.zip target= _blank http://www.resource.datavideo.com/firmware/Datavideo_SE-1200%20Controller%20Small%20v1.3.0.8.zip/a

Q: 7. Will this work with this tripod? a href= http://www.bhphotovideo.com/c/product/1086394-REG target= _blank http://www.bhphotovideo.com/c/product/1086394-REG/a

A: You can use this tripod for it can handle the weight. Do know you need a fluid head with a quick release plate to actually mount the crane.

Q: 8. Can I use a consumer camera with BNC out, like the BNC on datavideo SE-500

A: Hello,No, BNC connector on the SE-500 is for a Composite signal input. Our SE-1200MU switcher is a HD switcher that accepts HD-SDI or HDMI signals. It is compatible with Composite output from a consumer camera. Thanks!

Q: 9. Are the keys (buttons) on this machine made of rubber?

A: Yes. The following keys are made of rubber.

Q: 10. do we need the wifi?

A: The DNP DS620A, DS820A, QW410, DS-RX1HS, DS40, and DS80 printers can all work without the DNP WCM Plus Wireless Connect Module, but the module is a good option to print from phones, tablets, or computers without a wired connection.