Audio professionals looking for the very best converters will appreciate the updated Apogee Electronics 16x16 SE Module, a sixteen-channel analog input and sixteen-channel analog output module for the Symphony I/O Mk II. The module occupies one of the two slots available on the chassis. Additionally, two-channel coaxial S/PDIF input and output is also provided. The A/D circuit has been refined to offer a streamlined circuit design, resulting in the most transparent signal path to the A/D stage possible.

The D/A section has been optimized with a more powerful and robust output driver that is capable of driving virtually any input without a decrease in performance, regardless of the load presented by the connected gear. The analog inputs and outputs are offered on DB-25 connectors and require optional breakout cables, available in various configurations to suit individual requirements.

Symphony Mk II Chassis    Two 16x16 SE Modules    Thunderbolt Connectivity    Pro Tools HD and Dante Connectivity    32 Analog In / 32 Analog Out    Two S/PDIF I/O    Up to 192 kHz Sample Rate    Dolby Atmos Ready    Color Touchscreen Display

Analog-to-digital and digital-to-analog module for the Symphony I/O Mk II system

Sixteen channels of balanced analog input and sixteen channels of balanced analog output

Two channels of coaxial S/PDIF input and output

Ultralow latency conversion

Entire audio path is DC coupled, resulting in ultra-flat frequency response and extremely low phase error

Related Questions and Answers

Q: 1. Will this output to an Atomos Ninja recoder?

A: Yes, you can use this with an Atomos. Just make sure the Atomos is set to receive the type of video output of the switcher.

Q: 2. where can i get cooling for this motherboard?

A: The ASUS WS WRX80E-SAGE SE WIFI contains both passive and semi-passive cooling components, including a VRM heat sink with a fan and M.2 heat sinks. For additional cooling options, any CPU cooler compatible with the TR4 socket should be compatible with this board's sWRX8 CPU socket.

Q: 3. I'm trying to connect two church campuses for a meeting via cell phone and am wondering if two of these JK units would be of help so that the two campuses could communicate through their PA systems via cellular network. The question I have is how do I adapt the 3way 3.5mm jack into an audio in and out cable for use with the JK unit?

A: On the JK unit, 1.Insert 1/4 inch 3 conductors jack to (wireless Phone Hand set Jack) on the unit and the other end with 4 conductors jack to your cellphone.2.Insert XLR female to (From Phone Mic Level) on the unit and the other end of XLR male to Mic input on your audio mixer.3.Insert XLR male to (Line Input) on the unit and the other end of XLR female to Main out or Phone on your audio mixer.Both sides will have to use microphones connected to their audio system to speak instead of your cell phone.

Q: 4. Hello, I have this MSI GeForce GTX 1080 Ti GAMING X 11G Graphics Card. My questions is if this card will fit or will be compatible with this motherboard? I noticed that this MB has PCI Express 4.0 x16 and my card PCI Express 3.0 x16

A: PCI Express is backwards compatible. You card will work.

Q: 5. Will the IndiPRO unit be able to charge the Canon LP-E6 batteries or is a separate charger needed for the batteries?

A: You will need a separate charger for the batteries.

Q: 6. Will this work with this tripod? a href= http://www.bhphotovideo.com/c/product/1086394-REG target= _blank http://www.bhphotovideo.com/c/product/1086394-REG/a

A: You can use this tripod for it can handle the weight. Do know you need a fluid head with a quick release plate to actually mount the crane.

Q: 7. Would this fit nicely into the fractal design define 7 mid tower case? Thank you! I appreciate your knowledge and helpful attitude! For realz!

A: Yes, this ASUS Pro WS WRX80E-Sage SE WIFI sWRX8 E-ATX Motherboard will fit nicely into the Fractal Design Define 7 Mid-Tower Case.

Q: 8. How long is the RCA cord?

A: The RCA cable included with the Dual Electronics CS 329 is about 10 feet.

Q: 9. what is the mount to tripod? Just one 1/4-20 thread?

A: It uses multiple 3/8 16 and 1/4 20 threaded holes to mount to your tripod.

Q: 10. Does the mixer have an option to turn on/off HDCP?

A: We're afraid not. This switcher does not offer HDCP controls, you will not be able to connect HDCP compatible products to it. Instead you could look at the Roland V-1HD Portable 4 x HDMI Input Switcher, which allows for HDCP compliance to be enabled. https://bhpho.to/2gRuG3C