The Da-Lite 70393 Da-Snap Fixed Frame Screen can be mounted on the wall or in a wall opening. It has a viewing area of 120 x 192" for an aspect ratio of 16:10 and 226" diagonal.

Dual Vision is a flexible vinyl surface ideal for rear projection, but capable of both front and rear projection. It has a gain of 0.9 and 130° viewing angle. It is suitable for video projection under controlled ambient light conditions. With a wide viewing cone and light gray tint, a sharp image with no color shift is observed regardless of location in the room. This seamless surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. This surface has also achieved GREENGUARD GOLD Certification.

Reinforced black binding on all four sides attaches the surface to the frame with metal snaps. The snaps and binding are concealed by the frame, made of 1.5" square, matte black, powder-coated aluminum. The frame is slip-jointed at corners and joints. Standard wall-mounting brackets are included.

226" Diagonal    16:10 Wide Format    Dual Vision Front & Rear Surface    0.9 Gain / 130° Viewing Angle    1.5" Square Aluminum Frame

Related Questions and Answers

Q: 1. Hi,Does the price include the tripod and the ground spreader as shown in photo?

A: Hi, this is price for tripod only

Q: 2. Can you replace the glass bed on the Jr 1.0? How?

A: Scott is correct

Q: 3. how much 3D print befor the cartridge runs out of ink? (assuming full yellow color of 3d print)

A: Unfortunately there is no way to predict how long it will last because there are too many variables such as object size and the amount of yellow your object needs.

Q: 4. What range of wavelengths of light LESS THAN 400 nm does this lens transmit at least 50% of? At least 25% of?

A: Unfortunately, the manufacturer does not rate the lens for IR absorptance. However, as there is no IR coating, such near IR in particular should be expected to pass with little attenuation.

Q: 5. will this work with 3rd party filament

A: No it has an RFID chip with metering. There have been some hacks but the company keeps up on hack fixes.

Q: 6. What size filament

A: The XYZprinting da Vinci Junior 1.0 3D Printer uses 1.75mm filament.

Q: 7. Will the Video 18 Fluid Head work with this tripod?

A: Yes, The Sachtler CF-100ENG 2CF Carbon Fiber 2-Stage Tripod Legs support the Video 18 heads 100mm bowl size and would work.

Q: 8. Is this 120 snap-top container lightproof? I need to put a roll that was separated from the backing paper inside a changing bag.

A: No, the Kodak 120 Snap-Top Film Storage Container is not light proof like a changing bag.

Q: 9. I was given a new unit and I need a cord Could you give me a part number?

A: The XYZ power coed is not available at B&H.

Q: 10. Does the scanner feature allow a non-technical user to duplicate an object without using design software, analogous to a photocopier machine?

A: Yes, the scanner is capable of scanning objects into the machine for recreation.