Ethernet Network Interface Card

Ashly Ne4400ac Network Enabled Digital Signal Processor With 4-channel Aes3 Inputs + Cobranet Card

Product Code: ga147687
Availability: In Stock

$8,697.00 $11,045.19

Qty

0 reviews Write a review

Description
Reviews (0)

Control and protect your sound system with the Ashly ne4400AC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4400AC features four option bays for expanded functionality. This model includes the 4-channel AES3 input card and CobraNet card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

4 Analog Inputs / 4 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows

Parameters
Frequency Response	20 Hz to 20 kHz ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) <0.001%, A>D <0.002%, D>A <0.002%, A>A <0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Wordclock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.5 lb / 4.8 kg

CobraNet, Dante, AES3, Mic Input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
AutoLeveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Does the 6 channel model have a duck feature?

A: The Pyle Pro PMXU63BT Compact 6-Channel, Bluetooth-Enabled Audio Mixer does not have a ducking feature.

Q: 2. Can the USB interface record .mo3 files in addition to playing them?

A: plays them only

Q: 3. how well does this work for podcasting?

A: This mixer by Pyle will be a startig point for podcasting that will eventually be upgraded after growing your skills.

Q: 4. USB interface for the Mike?

A: The Pyle Pro PMXU43BT can be used as a USB interface for analog microphones. This means that if you want to record or send audio directly into a computer, this mixer will act as the analog to digital converter.

Q: 5. Can I connect this mixer's power supply to a European socket?

A: The Pyle Pro PMXU63BT Audio Mixer includes a power supply with a standard plug for use in North America, but you can use it with a step-down transformer like the Watson VCG-SD50 50 Watt Step-Down International Voltage Transformer (B&H # WAVCSD50) to enable compatibility in Europe.

Q: 6. .....I just read the description: it says Bass, Treble and Balance Controls YET as I look at the face of this unit, NO bass, NO treble and NO balance controls? What gives? Mistake or are the controls in the back or ...what??....

A: It is available from the Audio Function button and visibly adjusted via the LCD screen MENU.

Q: 7. Where do I find list of FX digital effects ?

A: Unfortunately Pyle does not provide the list of 16 DSP FX included with this unit but you can also find out from them directly by contacting them here: https://pyleusa.com/pages/contacts

Q: 8. Does this amp has a safety protection trip on it ?

A: The manufacturer has not published any specs regarding a fuse link or thermal protection circuit.

Q: 9. Playing MP3 from USB or SD in shuffle mode, then turn off the unit. When turned on again, will it play the same song or restart at #1?

A: When turning off the unit, the song position will be reset to the start of song # 1.

Q: 10. Can you confirm if it can run on 220V ?

A: The system has a switch on the rear panel for 110 or 220V AC operation.

There are no reviews for this product.