Designed for system cases and optimized for airflow and noise, the black UNI FAN TL 120mm Fan from Lian Li comes bundled with three fans, a controller, a UNI FAN controller cable (P-7P), a pin cover, a magnetic adhesive pad, and twelve screws. Each fan features nine fan blades, a fan speed of 200 to 2600 rpm with Pulse-Width Modulation, and Fluid Dynamic Bearing technology that provides stability, durability, and longevity. It generates only 33 dBA of noise, a maximum airflow of 90.1 CFM, and a maximum static pressure of 3.97mm H₂O.

The fan also has 26 LEDs with a side diffuser on each side of the frame. An infinity mirror on both sides of the frame helps showcase multi-layer lighting effects, or customize individual effects on each side of the LED strips. Protection is provided by a limited 3-year warranty.

Includes Three Fans with Controller    Nine Fan Blades per Fan    Dual Zone Lighting Effects with 26 LEDs    Enlarged Infinity Mirror    Pulse-Width Modulation    Fan Speed: 200 to 2600 rpm    Maximum Noise: 33 dBA    Fluid Dynamic Bearing Technology    Daisy-Chain up to 16 Fans per Controller    Anti-Vibration Rubber Pads

• Noise-optimized and performance-oriented fan
• LCP (liquid crystal polymer) fan blades are used for tight tolerance
• FDB bearing with copper shielding to ensure stable rotation of the impeller
• Enlarged infinity mirror around the frame with a longer light guide for a unified daisy-chained look
• Features two light zones for increased lighting customizability
• UNIFAN interlocking system for ease of cable management
• Cable connection is supported on both sides of the fan
• Support up to 10 fans per controller port via a daisy-chain POGO cable
• LED lighting and fan speed controller shared with UNIFAN TL LCD
• Complete software control with L-Connect 3

Building on the design success of the UNI FAN series, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
Featuring both male and female ends, the cable can be connected to both sides of the fan, providing enhanced flexibility and ease of installation.

Note: To ensure that lighting effects are set in the proper direction, set the orientation in L-Connect 3 under Settings > Device.

Well Adapterd for Multiple Configurations
Besides the removable interlocking key, TL fans include connection covers for exposed connections at the end to help prevent short circuits while improving compatibility.

10 Fans In a Row and up to 16 Fans
Connect up to 10 fans to a controller port using the extension cable, which offers users the ability to create up to 4 clusters in a chain. Each cluster supports a maximum of 4 fans for individual customization of fan rpm and lighting, allowing a truly personalized build setup such as having 3 fans on the top, 3 on the side, 3 on the bottom, and 1 on the rear.

Power Until the End
This triple-pack configuration offers an extra power adapter for SATA connections, offering consistent fan speed and LED color throughout.

The UNI FAN TL is engineered for high performance with minimal friction and vibration, ensuring quiet operation, even at high speeds.

Liquid Crystal Polymer (LCP) Fan Blade
Ensures tolerance for high speed operations.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Frame
To provide extra support for fan blades.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Copper Shielding
To reinforce the shaft and ensure stability at high-speed operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

Crafted with LCP material, the UNI FAN TL has a larger 9-blade impeller, with tight clearance to the fan frame, which ensures efficient airflow while minimizing acoustic levels for cooling.

You're able to set different fan speeds for each fan cluster to optimize different scenarios of use, providing flexibility for radiator or case fan needs with L-Connect 3.

Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Illuminate your setup with the UNI FAN TL's enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 6 TL LCD fans.

Note: TL and TL LCD share the same controller but use different controller cables. Do not mix the controller cables.

Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn't support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard's 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.

Note: Do not use a splitter; plug directly in for a stable signal.

Related Questions and Answers

Q: 1. Will this battery work with the Fuji X-S10?

A: This battery works on the Fuji X-S10.

Q: 2. I'm struggling to find a fairly basic strap that will attach properly to an F100. Will this work?

A: Not sure what camera you are referring to, but this strap should fit any 35mm or digital SLR. One note of caution when purchasing these strap, note where the connections are located. I have one that connects higher on the neck and when released leaves about an 8 strap hanging. This one appears that it only leaves a short amount of the strap, to me this makes it less cumbersome when you don't want to use the camera around your neck, like when the camera is on a tripod.

Q: 3. Will this strap attach to a Sony FE 200-600 zoom lens?

A: Yes, but we usually suggest the following models as they support more of a payload OP/TECH USA Envy Strap (Black) BH #OPESB • MFR #3801332 https://bhpho.to/3Wt4DDj

Q: 4. What is the expected user life (number of charging cycles) you can expect? I

A: Lithium batteries last on average about 500 cycles.

Q: 5. Can i use this on x-t1?

A: Yes you can. NP-W126S has a better heat dissipation than the one without the 'S'.

Q: 6. Can you use this as a shoulder strap?

A: I can use it as a shoulder strap butI was surprised that there isn't much length to play with. I am 5'6 and weigh 145lbs. So I'm fairly small framed. I can put it over my head so it goes across my body and swivel it from front to back with it adjusted to full length.

Q: 7. Do the fans run all the time, or only when the cabinet temperature requires it?

A: The fans on the Airplate T8 would run according to the temperature that is programmed and it runs at different speeds as well.

Q: 8. Will this work with the mini QD extension set? (Are all of the Optech QDs the same size?)

A: My error and I do apologise. OP/TECH USA does have two sizes of their QD or Quick Disconnect connectors. If you wish to extend the OP/TECH USA Super Classic Strap-Uni Loop (Black) B&H # OPSSUL, use OP/TECH USA Extra Long Extension Connectors, 2-Pack (Black) B&H # OPSCEXL MFR # 1301092. As you have found the Mini QD are too small and will not work. Again, please accept my apologises.

Q: 9. Does the strap length listed (36.0 to 43.0") include the length of the connectors or will those add extra length?

A: The length is listed including the Uni Loop QD Connectors.

Q: 10. Is this more comfortable than their Envy strap? I will use it around the neck

A: Yes, this neoprene strap is more comfortable than the Envy strap.