Designed for system cases and optimized for airflow and noise, the black UNI FAN TL LCD 120mm Fan from Lian Li features nine fan blades, a fan speed of 350 to 1900 rpm with Pulse-Width Modulation, and Fluid Dynamic Bearing technology that provides stability, durability, and longevity. It generates only 27 dBA of noise, a maximum airflow of 62 CFM, and a maximum static pressure of 2.9mm H₂O.

Thanks to a 1.6" IPS display, users will be able to monitor temperature and loading of their CPU and GPU, plus fan speed. Or, upload a personalized MP4, GIF, JPG, or PNG to the display. The fan also has 26 LEDs with a side diffuser on each side of the frame. An infinity mirror on both sides of the frame helps showcase multi-layer lighting effects, or customize individual effects on each side of the LED strips. Included is a UNI FAN controller cable (P-7P) and four screws. Protection is provided by a limited 3-year warranty.

Please note that the controller is not included but is required for use. UNI FAN TL series fans will not function without a controller. Controllers are only included in the 3-pack.

Nine Fan Blades    1.6" 400 x 400 Customizable IPS Display    Dual Zone Lighting Effects with 26 LEDs    Enlarged Infinity Mirror    Pulse-Width Modulation    Fan Speed: 350 to 1900 rpm    Maximum Noise: 27 dBA    Fluid Dynamic Bearing Technology    Daisy-Chain up to 7 Fans per Controller    Anti-Vibration Rubber Pads

• 1.6" LCD screen with 400 × 400 resolution
• Supports GIF, MP4, JPG, and PNG files
• Suitable as a PC case with airflow and noise optimization
• Comes with Lian Li flow-through animations through L-Connect 3
• FDB bearing that provides stability, durability, and longevity
• Enlarged infinity mirror around the frame with a longer light guide for a unified daisy-chained look
• Features two light zones for increased lighting customizability
• UNIFAN interlocking system for ease of cable management
• LED lighting and fan speed controller shared with UNIFAN TL
• Complete software control with L-Connect 3

• PCIe power cable
• 400 × 400 resolution
• 500 nits typical brightness
• IPS display

Monitor the temperature and loading of your CPU and GPU, as well as the fan speed, instantly with built-in hardware monitor dashboards on the screen.

Note: The more sensors used, the higher the CPU load will be. It is recommended to keep sensor display at a maximum of 3.

Elevate your system's style by uploading your own personalized MP4 / GIF / JPG / PNG.

Building on the design success of the UNI FAN series interlocking system, the UNI FAN TL series takes clutter-free setups to the next level.

Durable Daisy-Chain Solution
Experience a hassle-free setup with the slide-in daisy-chaining mechanism, securely holding the fans in place and ensuring a snug fit for easy configuration.

Seamless Connection
A single cable is all you need to connect a group of up to 3 TL LCD fans to the controller, which supports a maximum of 7 TL LCD fans per controller, with a group of 3 on each port (up to 16 TL+TL LCD fans in total). To operate 8 to 12 TL LCD fans, please use 2 controllers simultaneously. Note that L-Connect 3 doesn't support more than 13 TL LCD fans.

Note: The controller cable is only applicable on the pin side of the fan. Do not install it the other way.

Well Adapted for Most Configurations
The interlocking key at the end of TL LCD fans is removable for enhanced compatibility and less interference with other components.

The UNI FAN TL LCD is engineered for stable fan blade operation, ensuring efficiency at a low noise level.

Metal Bearing Shell
To securely hold the impeller to the shaft.

Magnetic Rubber Ring
To provide extra support for fan operation.

Stator
To provide a rotating magnetic field that generates momentum.

Brazz Nut
To prevent oil leaks.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability.

Shaft and Copper Base
To ensure fan blade stability during operation.

Thicker Fan Frame
28mm thick fan frame helps deliver more airflow and static pressure.

Rubber Pads
To reduce vibrations and maintain extremely low noise levels.

This fan provides an improved cooling experience with a fan that doesn't compromise on thermal control, all while offering a personalized screen for a touch of individuality. It features an airflow of 62 CFM, a static pressure of 2.9mm H₂O, and noise levels of 27 dBA.

You're able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3. This fan has a speed of 350 to 1900 rpm.

Each UNI FAN TL fan has 26 LEDs with an elegant side diffuser on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.

Illuminate your setup with the UNI FAN TL's enlarged infinity mirror (30% larger than UNI FAN SL-INF on the side) on both sides of the frame, showcasing clear and 0.7mm gap multi-layer lighting effects.

Easily customize different lighting effects on the two sides of the LED strips using L-Connect 3 for a unique setup. You can also sync your TL fans and apply the same lighting effect you like across all of them.

Cover the screws with anti-vibrate rubber pads for a seamless and uninterrupted aesthetic appeal.

L-Connect 3 offers complete control over the UNI FAN TL series, including the lighting effects, fan speed, and LCD screen.

UNI FAN TL and TL LCD share the same controller, enabling the connection of up to 16 TL and TL LCD fans simultaneously, with a maximum of 7 TL LCD fans.

Each port supports a maximum of 10 TL fans or 3 TL LCD fans, but the 1st port doesn't support TL LCD. The PCIe power cable powers up the connected fans, a USB cable plugs directly into the motherboard's 9-pin USB header, and the 5V ARGB/4-pin PWN cable is required for motherboard sync functionality.

Note: Do not use a splitter; plug directly in for a stable signal.

Related Questions and Answers

Q: 1. Will this strap work with a Nikon A1000?

A: The quick connectors on this strap are to large for the strap eyelets on the camera. The OP/TECH USA Mirrorless Strap with Mini QD Connectors (Black) linked here uses thinner quick connectors and will work with the Nikon A1000. https://bhpho.to/3fdcimt

Q: 2. will this fit the 600mm 5.6 Nikon AI(S)?

A: I have the Tamron 150-600 mm Zoom lens, The 120mm push-on cap from B&H fits perfectly.The cap's inside diameter is exactly 120mm or 4.75 inches. Get a metal Metric/Inches ruler from your office supply store or art supply store.

Q: 3. I'm struggling to find a fairly basic strap that will attach properly to an F100. Will this work?

A: Not sure what camera you are referring to, but this strap should fit any 35mm or digital SLR. One note of caution when purchasing these strap, note where the connections are located. I have one that connects higher on the neck and when released leaves about an 8 strap hanging. This one appears that it only leaves a short amount of the strap, to me this makes it less cumbersome when you don't want to use the camera around your neck, like when the camera is on a tripod.

Q: 4. I would want to use it with a camera and binoculars. Does that work as well as two cameras?

A: Yes, the Dual Harness will work equally well with either two cameras or a camera & binocular combination.

Q: 5. Are the connectors (uni-loop) on this harness better than the 3/8" cord version? I have a Canon 6D and thinking of getting a 7D body. Wondering if there is some advantage to these?

A: Both versions of the Dual Harness are a comfortable and versatile way to carry two cameras or binoculars. They each have a recommended load of up to 15 lbs. per side. The Dual Harness™ - 3/8" incorporates the 3/8" webbing connectors that are compatible with many other OP/TECH USA neck straps. As a result, you can quickly change from one system to another. This version also enables you to carry two cameras on the sides or only one camera on either side or one in the middle. It’s very versatile and easy to configure. The two connectors that are attached to your camera can be connected to each other to form a small hand strap if needed. The Dual Harness™ - Uni-Loop includes the popular Uni-Loop connectors for those photographers wanting a short connector on their camera. This connector makes it possible to move your gear to other OP/TECH USA slings, wrist straps and harnesses with Uni Loop Connectors in just a few seconds.

Q: 6. Will this fit the Olympus 300 mm f/2.8 for 4/3 format cameras? I'm looking for an easy on/off cover when I'm packing light (without the front hood). Otherwise, and exact ID (measured with digital calipers) of the hood or OD of a lens it works on would be great. Thanks!

A: I don't think so. The Cap ID is exactly 120 mm or 4.723 as measured with a precision Digital Caliper.Measure the lens that you have.Joe

Q: 7. Is this more comfortable than their Envy strap? I will use it around the neck

A: Yes, this neoprene strap is more comfortable than the Envy strap.

Q: 8. Do the fans run all the time, or only when the cabinet temperature requires it?

A: The fans on the Airplate T8 would run according to the temperature that is programmed and it runs at different speeds as well.

Q: 9. has anyone tried to use this to carry a tripod and camera and if so did it work well?

A: unit can be modified to carry a tripod but is not very practical nor comfortable I would suggest looking into the following tripod strap for a better and more comfortable experience OP/TECH USA Tripod Strap (Black) https://bhpho.to/3xxPBPQ

Q: 10. Can you use this as a shoulder strap?

A: I can use it as a shoulder strap butI was surprised that there isn't much length to play with. I am 5'6 and weigh 145lbs. So I'm fairly small framed. I can put it over my head so it goes across my body and swivel it from front to back with it adjusted to full length.