Designed to be the perfect partner for amp modeling devices and large pedalboards, the FRFR-112 MKII Powered Cabinet from HeadRush offers pure tone reproduction and an exceptional amount of power for even the largest stages and rehearsal spaces. Sporting 2500W peak power output and a 12" woofer with 1" compression driver configuration, the FRFR-112 MKII stays true to its name: full range, flat frequency response.

Built-in Bluetooth 5.0 connectivity is a convenient option for providing wireless streamed music from your mobile device during set breaks or rehearsals. Two XLR-1/4" combo jacks with independent volume controls are available, and you also get an XLR mix output for chaining speakers or sending audio to a live sound system for a front-of-house mix. A high-pass filter switch helps reign in muddy stage mixes or excessive low end, while a ground-lift switch makes it easy quash electronic noise without external gear. Rugged and compact, the cabinet is offered in a wedge shape for perfect stage placement, is light enough to be easily carried, and allows for horizontal, vertical, or pole-mounted placement. The FRFR-112 MKII includes a power cable.

For Guitars, Basses, and Amp Modelers    12" Woofer, 1" Compression Driver    2500W Peak Power Output    Bluetooth 5.0 for Wireless Streaming    Two XLR-1/4" Combo Input Jacks    One XLR Mix Output    HPF Switch for Muddy Stage Mixes    Ground-Lift Switch for Electronic Noise    Rugged, Compact, and Pole Mountable    Includes Power Cable

If you’re new to FRFR amplifiers, FRFR stands for full-range flat-response. This special type of amplification is very important for amp modeling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true amp in the room sound without coloring it as a traditional guitar amp would. The FRFR-112 MKII is precision-designed to get the most out of your modeler and deliver all the intricacies of your amp and cab emulations, with enough volume to be ready for any stage, rehearsal, or jam session. 

FRFR-112 MKII outputs a massive 2500W watts (peak), which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 12" woofer and 1" high-frequency compression driver, the FRFR-112 MKII delivers a precise and full response across the entire frequency range without any artificial coloration—critical to getting the most out of your amp modeler. The FRFR-108 MKII's performance is exceptional, with a max SPL of 131 dB and a 44 to 20 kHz frequency range.

Stages and rehearsal rooms can easily become dense and muddy sounding as lower frequencies from different instruments battle each other. FRFR-112 MKII has a HPF switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix.

Unwanted electrical noise can also be a common problem. FRFR-112 MKII's ground-lift switch can eliminate hums and buzzes resulting from ground loops.

FRFR-112 MKII is rugged yet lightweight and easy to transport at 34.7 lb / 15.7 kg, making one-trip load ins at the gig or rehearsal space easier than ever. While you can use FRFR-112 MKII in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it. This is especially helpful at outdoor gigs or other places where the PA backline is limited.

Related Questions and Answers

Q: 1. We need a cabinet with an RH below 5%, where can we get one?

A: SIRUI Humidity Cabinets do not have temperature control. Internal humidity cannot be set below 25%. SIRUI Humidity Control Cabinets are not humidifiers; they cannot increase internal humidity.

Q: 2. Can this cabinet, or some others of the Humidity Control Cabinets be vertically stacked? I can somewhat see that there are round feet installed on the bottom of the cabinet. If better suited for stacking, can the feet be removed to allow for easier stacking of the same model units, one on top of the other?

A: The top is smooth metal, wouldn't lend itself to stacking. there are units that B&H sells that are two level.

Q: 3. What is length: end-of-snapclip to end-of-snaoclip?

A: The strap's length is 20.75 (52.71 cm)

Q: 4. What humidity range can you program the cabinet to?

A: The Sirui HC-200 can be set between 25 to 60% relative humidity.

Q: 5. Do the shelves slide out, or are they fixed?

A: The HC200 has two doors and 4 adjustable loading trays.

Q: 6. What are the specifications of the 2 individual sections ie the bottom section and top section?

A: The top section is 15.5 inches deep, 17.5 inches wide and 15 inches tall. The bottom section is 15.5 inches deep, 17.5 inches wide and 27.25 inches tall.

Q: 7. Can the shelves be taken out?

A: The shelves are adjustable in position, and can be left out/removed if desired. :)

Q: 8. Will a Nikon 600mm F4 FL fit?

A: The shelves in the Sirui HC-110 Electronic Humidity Control Cabinet could be adjusted, so the Nikon AF-S NIKKOR 600mm f/4E FL ED VR Lens fits in the cabinet.

Q: 9. 1. I am buying my first dry cabinet. Which of these is a better brand where warranty and performance is concerned? Benro, Sirui, Photron, DigiCabi, Andbon.

A: I chose Sirui. Yet, you have to monitor with at least 2 independent humidity meters in the beginning and for a couple of weeks, to see which setting you should be using. In order to keep the humidity inside at 40%, I had to set it at 52%. That's what my tests proved with four (4) independent humidity meters. Each unit may be different. I monitored it over 1 month at a setting of 52%, and at that setting it keeps humidity between 40-42 constantly, which is perfect. I was also surprised at how much gear you can place inside those units.

Q: 10. Can you set the cabinet to a specific temperature that the cabinet will then sustain?

A: No; the Sirui HC-110 Electronic Humidity Control Cabinet would allow you to set the internal relative humidity between 25% to 60%, but it does not allow you to set the internal temperature. However, it does have a temperature display on the unit.